32308 8-in-1 Adjustable Magnetic Multi-bit Stubby Screwdriver

Another rare 5 star review. Top notch stubby screwdriver. It is designed so that you press a little collar at the bottom of the handle, and you can extend the shank to one of several settings, or remove it completely. When removed completely, the 1/4 hex shank can be used in a drill, or even an impact driver, as the shank and bits are all impact rated. The bits store securely under the top cap of the handle. There are little 'notches' you grab to access the bits. The bit holder is captive in that it will not pop out of the handle and scatter the bits all around. The bits are a bit of a challenge to get out the first few times until the bit holder loosens up, but I'd much rather have it on the tight side than the loose side where the bits could fall out. The handle itself is comfortable and grippy. Honestly, I couldn't tell you how to improve it. It is about the best balance I can find for being both compact and able to get into tight places, yet being substantial enough to really be put to use. That the shank is extendable/removable and everything is impact rated is just icing on the cake. The bits are very well made and fit precisely.

You won't be disappointed with this stubby screwdriver. I have the full size version of this and this one just get into all the spaces that the full size doesn't. You can't go wrong with this purchase.

Multi bit driver is really nice. I especially like the variable length adjustability of the shank. Highly recomnend.

A handy little tool I have to break out when my 11 in 1 is too big. Gets the job done. The bad- The grip has come lose like all Klein drivers and had to glue it back. The bits are smaller than normal bits and are a pain in the rear changing them out. I always have to grab my little pliers to get the bits out and change them which takes longer than it should.

I grudgingly update my review to 4 stars because the tool is very nice. It’s well made in a way that speaks quality, it’s just not what I thought I was buying. It doesn’t ratchet. I searched for ratcheting ones, found this one and I like Klein so I bought it but now I find out it doesn’t ratchet. So Klein, if you’re listening, tell amz to stop showing products that don’t match the search criteria and I am reminded to look before I leap.. I have Klein tools that I bought 50 years ago and still use. When I find them at jumbles or estate sales I always buy them and then bring them back to polished glory. I don’t think you can buy a side cutter today that can beat a 50yo Klein that wasn’t abused but I’m unlikely to find out if today’s tools live up to that.

This is exceptionally stubby and drives all types of screws. Buy it as a gift for your friend with tiny hands to make him feel strong.

Instructions aren’t the best but after messing with it figured it out. To hold the arm bit to any degree you have to pull down on the black rotating washer and insert it into the rod bit into the center. It will hold on as long as the bit butt is completely within the handle. Great little tool for the car or simple fixes for that junk drawer in the kitchen, foyer, etc. Could probably do well as an EDC (every day carry) but the starter bit is likely to get lost moving it around amongst other tools and accessories. Guess it’s an “extra” in that sense.

I have no trouble getting the bit storage compartment open, unlike some reviewers. Maybe my fingers are stronger, or maybe theirs was defective, I don't know. I also can pull the bit out of the end just fine; the magnet is definitely strong, but I see this as a good thing. The magnetic field is conducted through the bit well enough that it can hold a small screw pretty well. I do find it a little difficult to pry the bits out of the storage compartment, but I manage. It's nice that they won't fall out accidentally. I would have preferred a #0 Phillips bit instead of a #3. The packaging actually says it has a #0, and I said "Cool!" when I saw that, but it turned out to be wrong. The online description is correct. I might try to find a #0 bit that will fit in the compartment (these are very short bits), but I'll probably never bother. The adjustable length works well, once you figure out that you have to push in the little plate at its base, similar to a quick-release drill chuck. You can also remove it and put a bit directly in the handle, if you want it even shorter, but the bit isn't held in place. I thought maybe it would stay in place if I clamped it in by pushing on the plate, but then pushing on the bit can push it all the way in - don't do that! I'm not sure how hard it would be to get out again.

La marca es garantia desde mi punto de vista tengi varias herramientas de la misma marca y me han sido de gran utilidad además de la versatilidad de todas las puntas que tiene

8 قطع مناسبه للاحتياج المنزلي وأكثر ،وجودة جدا عاليه 👍🏻

Great quality.

Très léger et pratique. Très facile utilisation, bonne prise en main, solide, la qualité Klein tools. Embout réglable est vraiment très utile.

Superb quality screwdriver, very useful to store extra bits in the top. Comes with 7 bits (6 fit in the handle, 1 extension but in the handle and 1 bit in the extension). But quality is very good and heads are very accurate. Set cane with P0, P1, P2, 2 flat heads and 2 square drives. Hex bits might have been more useful but overall no complaints. Compression part easy to use to extend the driver. Overall can go from 90mm to 135mm with extension.