BoxWave Screen Protector Compatible with Wacom Cintiq 13HD DTK-1300 - ClearTouch Anti-Glare (2-Pack), Anti-Fingerprint Matte Film Skin

Very nice heavy duty screen protector, very easy to install, only ended up with one spot that caught a dust partial which is my fault didn't see it before applying to screen. You Just have to have patience when applying had it on in less then 5 mins. Will DEFFENTLY be coming back to reorder when needed, which could be a while sense you get 3 in a pack and seem to be heavy duty enough that with normal use will last quite awhile. Also comes with a cleaning cloth and a wet and dry moist towletee and bubble remover.HIGHLY RECOMEND. Thanks

This product arrived on time and in good condition. It came with all it said it would and it leaves no residue on the tablet surface if you peel it back up. When I installed it, I followed another reviewer's advice and, after wiping down the tablet very well with the cleaning cloth, I lined the long edge of the protector (adhesive side downward but still covered by the film) along the long edge of the tablet, the pull tab at that end. Slowly, I pulled the film off, using the card to smooth down the protector and wiping the tablet every few seconds to make it dust free. If a bubble forms when you are doing this and you can't work it out with the card, that means dust got on the tablet after all. Very slowly, peel the protector back up until the bubble is out and use a piece of scotch tape to pick off the dust, then go again. DO NOT BEND THE SCREEN PROTECTOR SO THAT THE ADHESIVE SIDE IS FACING UPWARDS IF YOU'VE ALREADY REMOVED THE FILM. DUST IS ATTRACTED TO THE PROTECTOR AND WILL MAKE IT UNUSABLE IF YOU DO THIS. KEEP THE ADHESIVE SIDE FACING DOWNWARD AS MUCH AS YOU CAN, ESPECIALLY IF YOU HAVE ALREADY PEELED OFF THE FILM. If you continue to try to work a stubborn bubble out with the card, you may imbed the dust in the tablet surface, so don't do that. If you go too fast, there will be a lot of bubbles that are hard to work out. Patience is key. Now, the first time I put the screen protector on the tablet, it went on well, but there were a few bubbles along the bezel, and I stupidly peeled the protector back to get them, bending the protector so the adhesive side faced upward. Ruined it with dust. The second one that is included I had more luck with. I may buy this brand again, it is fine for me, but it does scratch easily if you use the eraser side of your pen. Also, the card for smoothing it down can scratch it, so be careful with it. All in all, I feel I received good quality for the price.

It was a little tricky to apply, but once I got it on, it hid all of the scratches on the built-in screen protector and my pen moves like it was brand new!

When I previously bought this item it was difficult to apply without dust no matter what was done. This is my second time buying these, after getting good use out of my first purchase of these. The second purchase was clearly a mistake. I tried to replacing my screen protector and immediately I had issues. One of my screen protectors was already creased/bent in the middle. The second one that came with this purchase had a huge scratch on the middle that was revealed when i took the second step film off it. I really wish i could have gotten a refund for this, it saddens me that this happened.

I'm not happy with this product. I don't know why people are giving this a good review. I've been using this for less than a month and it's already filled with scratches. I've used Folix https://www.amazon.com/gp/product/B00DJJ66LG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 which has given me 2 years of heavy usage before having to replace with this item. Really disappointed and will never buy again. Need proof? Look at the images attached.

Very neat protector though I'm still bad when it comes to bubbles but at least it's on the outside of my cintiq so it's not in the way and it saves scratching so I cant complain, thank you very much!

Screen itself is great. Doesn't impact visibility and has a nice texture similar to smooth paper that I like. Reduces glare a little and even my grubby Cheetos hands have difficulty leaving persistent prints on it.Does not come with instructions so i'll provide some below.- You get two screen protectors. If this is your first time you're gonna mess up the first try.- It is absolutely imperative that you apply this in a completely dust-free room. A single grain of dust or hair will cause a very large air bubble. - The simplest way to do this is to turn your shower on hot and leave it running until steam fills your bathroom. Go ahead and take a shower and scrape all your loose hairs off while you're at it. Might as well apply the screen protector naked too so your clothes won't drop fibers. - Bring your tablet and the protectors into the steamy shower room AFTER the steam has condensed on the walls, taking all the dust with it. If you bring it in while there is still steam in the air it'll condense on the tablet, bringing all the dust with it. You will also have to squeeze out water as well as air bubbles.- Lay down one of the long edges first. Bend the center inwards a little so it falls middle > edges.- Keeping the front-side protective cover on squeeze out the air bubbles with the tool provided.- DO NOT try to lift the cover up and clean the adhesive backside. You're gonna pound dust right into it.- If after all this you still have a few dust bubbles you can keep working it with the scraping tool and the air will eventually push out.

I liked the new protection of these screen protectors, however when it arrived there was a small fracture on the screen itself, it's not large enough to be a real bothersome, but it is still clearly there. No doubt it got damaged due to bad packaging.

El paquete no era como lo esperaba pero se ve de buena calidad. Aún no los utilizo, por lo que espero que cuando lo haga el producto sea satisfactorio.

Great! Exactly what I wanted, still feels great to draw on as if it was the screen itself. Fairly easy to apply. And keeps the screen pristine.

Good product, protects my wacom 13 hd screen really well I don't have to worry about scratching it or anything. Been using it about a month or so now pretty extensively and no problems or scratches even on the protector. A bit confusing to figure out though, the instructions were very unclear and didn't make sense so it took some figuring out on our part to get it on, but once it was on its fine. A tiny bubble or two but mostly on the edge and as I said, tiny, and not on the screen where I draw either so no biggie. Arrived in good time too

Fast and awesome

If your going to make a product that really only has one shot of putting it on, at least label which side is the front and back for goodness sake. Not 1 and 2, these can be construed in either front or back.Thanks to this pretty much botched the screen attempt.