2.5ft H x 4.7ft W (2 Panels) No Dig Zippity Madison Fence Panel Kit, No Dig Fence Panels, White Vinyl Fences for Yard, Temporary Fence for Backyard, White Picket Fence Garden Border, DIY Fence ZP19001

I looked and looked and looked for something to hide the outdoor electric boxes. The fake rock covers are insanely expensive and I would need 3 of them for all three outside components. I did not want an entire enclosure- just something aesthetically pleasing, sturdy and the right size for these fairly large monstrosities. Most metal fence pieces are too small and would look odd in front of these structures. The cheap plastic "fences" are exactly that.This item was exactly what was needed. They are sturdy, the right size for the job, easy to put together and come in a 2pack!. I only used to put on one side but you can enclose any structure if you want. They look great. Great value.As an aside, I would probably not use this as a dog barrier - may not be strong enough to stand up to a large strong dog without getting damaged

I had earlier purchased a few of these to temporarily extend a dog fence & decided they would make a nice surround for my backyard garden area. Ordered 9? I think 18 panels, very easy to assemble. Very last unit had 1 faulty picket. I called the company and they immediately over-nighted a replacement! What nice people, great company and lovely fence. A++ in my book. Highly recommend. (also, I'm 73, so when I say EASY I mean it!) I'll try to photo when the yard is finished.

I got this fence to distract from the vacant lot next to my driveway where the wetlands have expanded to create a swampy area. It doesn't HIDE the area as the fence isn't solid, but I thought it would distract and I'm pleased with the results. I need two more sections, which will deliver today, allowing me to complete the job next weekend. I added mulch and a dwarf tree at each end.PROS:PRICE. This is remarkably inexpensive for what you get.ASSEMBLY. I'm a 63-year old woman and I assembled and put up this fence entirely by myself. After the first section, the other sections went together very quickly. It's simple, but I recommend sorting out the different sized pickets in advance and double-check before inserting each one. They snap into position, so if you use the wrong size, removing is challenging at best.LOOKS. I'm pleased with the end product. Does it look like a professionally installed fence? No, but for the price, it's great. (Not only is the price of the fence a great value, but not having to hire an installer saves a TON!)QUALITY. Still TBD, but I banged on these sections with a rubber mallet when installing and not a mark was left on them.CONS:ALIGNMENT. Nearly impossible to get the sections to perfectly align, particularly if the ground isn't 100% level. Some of mine came out great, with the break between the sections barely noticeable, but other places I tried and tried and couldn't get perfect alignment.CONNECTORS. Connectors are provided to connect one section to another. There are NO pre-drilled holes. As other reviews have said, the "self-drilling" screws are not. I tried to drill holes in the top of the fence to attach the connector pieces and the drill did not penetrate. It merely made an indentation. Whether that speaks to the sturdiness of the fence or the whimpiness of my drill, I'm not sure.LONGEVITY. Still to be seen, but concerned about the toll high winds and winter weather will take. I COULD yank the fence out for the winter and re-install in the spring, but not sure I want to do that. It would also be difficult to hammer in each section now that the post caps are installed.For what I needed to do, this fence should work fine. It was relatively inexpensive and easy to put up. Unless you cement it into the ground, I don't see it being strong enough to contain a child or a dog, but for aesthetic use, it's great.UPDATE: I discovered after ordering additional sections that they were not created equally. The picket slats in the original sections fit very tightly and were a bit of a struggle to insert through the slots and snap into place. In the later sets purchased, the pickets fit very loosely. That made assembly easy, but makes the fence itself less stable. When hammering in those sections, the pickets would bounce up and fall out. I prefer the pickets with the more snug fit. If it proves to be a problem, I'll add some silicone to the loose ones.

I purchased this fence because we recently planted flower beds and I have 3 very large dogs (ranging from 60lbs - 120lbs) that were trampling through them. I needed a barrier to prevent them from using the flower beds as a short cut around the house.There were a few reviews here that nearly made me change my mind on buying this fence, I would like to counter those reviews here...1) A reviewer stated these were flemsy - in the listing it states that this is a temporary fence, meaning this is not the kind you buy at Lowes or Home Depot for 3x the price that you have to put 4x4 posts into the ground.2) One reviewer pictured the pieces at a bit of a distance, the slats almost looked to be thin like single 1/8" thick PVC... This photo was deceiving, please see my photos attached. The slats are double walled and have small nubs near the bottom to hold the slat in place.3) One reviewer stated that it is so flimsy it doesn't hold up to wind... This is also incorrect, I live Ohio surrounded by open farm land. We experience high winds regularly and not one fence has moved or fallen over. Heck the wind was so high the other day my telescoping flag pole let its self down from the wind. This reviewer obviously did not pound the fence into the ground far enough.Of course the fence comes ready to assemble, shipping would be outrageous if they shipped already assembled. I do want to make clear that I did not buy this fence to contain my large dogs, I purchased it to add a Visual barrier and I wanted something that looks nice.Do I feel the price is right, pretty much.. It could be a bit cheaper but it definitely is not to over priced.Pointers when assembling your fence:1) Be sure you have you top and bottom bar as they should go, the bottom bar only has openings for the slats at the top.2)Be sure you are putting your slats in the right location, I made a mistake and put two #1's side by side and have yet to get the slat pulled out due to the dubs holding it in place. :(3) Pound the fence into the location you want it prior to putting the fence caps on. A rubber mallet works best for pounding the fence post into the ground.4) I found it to be easier to affix the fences together prior to placing them in the ground by laying them on a flat surface.5) If you have to cut the fence as I did in one location, place the cut end up against another fence section, as the caps on the ends of the fence sections do not come off.