Epoxy Floor Kit – Good Full Kit – Gray Base with Gray Blend Flake – Covers 500 sq. ft. at 9.7 mils Thickness – Ideal for Garage, Basement, Concrete Floors, and More

I purchased this product after researching several brands. I covered 2500 sq ft. My contractor loves this product! Self leveling and shines great without a top coat. Follow up review: This product is still great on the floors but my husband spilled something on it and used some kind of cleaner to clean it up, not sure what it was, but it actually created a chemical reaction on the floor in that spot that made the floor sticky. Now I have this great big spot on my new bakery floor right before opening that won't harden no matter what. But I can't find any contact information for the seller to ask the questions. It says that it is resistant to chemicals, I sure hope so because this was done in a commercial bakery kitchen. Now I have these big dark patches right at the entry of my new bakery

I did a month of research before committing to this kit. You will spend twice the price on this kit compared to the ones in the big box home improvement stores but it is worth the investment. This is a high quality epoxy rated for 20+ years. if you get a cheaper kit you will see it wear off and flake in a few short years. Those kits contain water sometimes and this kit is 100% epoxy. The kit comes with just about everything you need. In addition, I would recommend: Paint roller, shoes you will throw away, plastic mat or dedicated area to mix, drill to attach to the included mixing attachment, and gloves. The seller is great. She was very accommodating and allowed me to pick my own color flake chips. Installation took about 4 hours by myself. I did not need to grind the concrete as it was a new house and didn't have any stains or residue on it. I did the acid wash that comes with the kit though which preps the surface. Everyone comments about how great the floor looks. It's easy on the feet and a breeze to clean up. 1 year update: We are approaching one year with my floor being installed. I continue to be impressed. There is no peeling or wear anywhere on the floor. We park the cars on it every day. I have spilled oil on it and other chemicals, but they all wipe up like water. There is not even a stain where the oil was. I have even waited a couple weeks with oil on the floor before cleaning it up, it wiped right up. If there is one thing i regret, it's using the optional gripping salt that comes with the kit. It gives the floor some grab when you're walking on it, but it makes it a little harder to clean, kinda like wiping a fine grain sandpaper. ----- Two and a half years later, there is no peeling or staining. Very easy to clean! Still extremely satisfied!

Purchased (2x) 500 sq. ft. - Products arrived in 2 - 5 gallon buckets both containing 2 smaller buckets inside each one; larger 2 gallon marked 'A' and a 2nd 1 gallon also marked 'A', along with a 4 LB bag of white flakes. Both contained what I believe now was just black paint. The result for mixing these now, as I hoped they were just mislabeled, is a sticky residue all over our basement floor that will not dry no matter how much time or heat has been applied. *Review posted 80+ hours after application.

Applied using squeegee and coats well. However, coverage is thick and reduces actual overall coverage. I will try to buy an additional 3 gallons with just epoxy and not the kit.

This is the second time I’ve used Epoxy-Coat for a garage floor coating. The first time was my own garage, and this time was for my neighbor. For someone with little to no experience, it was pretty easy to apply to a two car garage. My only advice is to do some research on how to apply it. First off, I absolutely could not do it on my own. The exothermic reaction that occurs when you mix the two-part epoxy happens fairly quick, so we needed one person to pour and spread while the other rolled it out with the paint roller. By the time we were at the end of the project the epoxy was thick and more difficult to spread, so speed is important. Other than that, make sure to use the acid solution the day before to clean the surface. I found a leaf blower very useful to dry the concrete surface after rinsing. The floor was completely dry the next day. My only complaint (not enough to remove any stars) is that the squeegee included in the kit is really small. I ended up getting a 24-inch heavy duty squeegee with a broom handle, which worked really well to spread the epoxy. Also, you might want to invest in the spiked shoes. If you accidentally (or intentionally) walk through the wet epoxy your shoes/shoe covers will stick and mess up the coating. Overall though, I definitely give this product 5 stars. It’s MUCH cheaper than getting the garage floor professionally done. As long as you don’t mind some minor DIY flaws (some bubbles, missed spots, etc.) this will probably save you at least a couple thousand dollars over hiring a contractor.

this was my first Epoxy floor install and after doing my research on preparing the floor and Installing the epoxy I still ran into problems. Namely wet spots, I think the lack information from the seller was partially to blame. It would have been helpful to know how much to mix up to do a certain amount of sq. ft. Because having too much mixed up you'll waste product not enough you'll try and stretch it out And both of those a good situation. An ratio of 2.3 to 1 Is all the information given but how much to mix up for instance say for 100 square how many ounces how many milliliters would have been very helpful. And on my Kit for 2500 square feet The numbers did not add up. In the end scraping up some wet epoxy and prepping the again underneath there I think it looks good. I hope that it will stay looking good for years to come if not decades. It would be nice if the instructions were more in depth it looks like the instruction sheet was printed out from A cheap printer and none of the QR codes actually led me to the 2500 square foot Good kit. I think for the money they could send instruction sheet that is for your specific application rather than one sheet that covers everything they sell and then you have to find your way to the product sheet that you're looking for. I did manage to get through to the cellar a couple times on the phone and they were able to answer some questions that I had. Lastly I would say when you're done mixing for three minutes pour it into another bucket and mix again for another minute. I didn't find that out until after I was done that perhaps could have stopped my wet spots when occurring.

This epoxy coat floor kit is awesome. I’m in love with my garage floor and couldn’t be happier with the results. I ended up adding a clear coat on top of the dart grey to give it a nice shiny and protective finish. 100 percent solids epoxy you can’t beat it. Looks amazing. Be sure to do your prep work! And when it comes to mixing my buddy and I mixed all the epoxy at once and after 3/5 minutes of mixing we poured out all of the epoxy on the floor and used a large squeegee to get the epoxy to all corners of the garage and even up the side walls. Followed the squeegee up with a large 18 inch roller and then went straight to chips. I know this project can be intimidating but as long as you take your time with the prep work you will have good results. Notice that the epoxy sets up quickly so if you mix the entire batch make sure you have some help to get the material spread out evenly and quickly. Get yourself and your helper some cleats spiked shoes extra large squeegee and an 18 inch roller. Check out epoxy coats website to see all the tools that they recommend and use. I plan on using my garage as a work space and likely won’t have any vehicles on the epoxy so I’m sure it will hold up just fine in my application. Do the prep, get the right tools that the pros are using, get a little extra epoxy it will be worth it to have extra especially on your first run.

Absolutely love this product!! When I tell you this is good quality it really is. Plus for the price you can’t beat it. I was able to complete the project in 2.5 hours. In total it took me 5 days. Day 1: I washed the floor with Zep Concrete cleaner. Day2: Next day I etched with dry lock and let dry Day 3: Next day I etched with the solution provided with the kit and let dry Day 4: I caulked cracks and let dry Day 5: I laid epoxy When people say the prep is the most important part they are not kidding. Don’t be lazy with this process! I feel like the prep made it so much easier and the epoxy looks and feels very durable. Also the tip about hitting the flakes on the ceiling gives a perfect even spread. I was able to apply the epoxy in two batches and didn’t have any issues with it setting fast. I live in South Georgia where it is always hot and humid. I did it earlier in the morning when it wasn’t too hot to make sure I had time to work the product about 70 degrees or so outside. If you can apply in the morning do so.

For the price it’s not the greatest in the market. Be aware that the supplier keeps changing delivery date so take the delivery date you see when you place the order and add a few more weeks to it. Product seems to come from overseas. Return is another nightmare!