ThermaltakeTG-30 Premium CPU/GPU Heatsink Thermal Compound | 4g | CL-O023-GROSGM-A

OK

I used this thermal paste to replace original paste on a few older consoles and definitely helped them run better overall. Noticed less fan noises or fan ramping up then did prior to replacing old thermal paste. Was easy to spread, cheaper than other options and worked as intended - that's a winner.

Been using this stuff for awhile and it's easy to spread!

No issues using this product and lasts longer than you'd expect if you put the right amount on the CPU

Excelente!!!!!

I've used this and Arctic before and they've always done what they were made to do. Thermaltake is a relatively good company and this should do as expected.

All these CPU compounds are probably from the same plant up the Ying Yang river. It's the packaging and sales that set them apart. Just like a can of green beans will come in generic, store brand, and top shelf and when you open them up there isn't much difference, and it's all due to marketing...

Great paste overall, easy to apply and ran at 76 degrees compared to the stock paste holding at a 96 degrees with a gaming load. Keeps the performance consistent and stops throttling. Benchmark showed significant long term performance for hours of gaming. The paste came out easily onto the computer chips and now fans dont run at 100% all the time.

Good products

Get's the job done there are no problems with it and it's cheap. The basic fineline thermal paste.

good productreplaced my stock paste with it.

As I had enough of another paste to finish of the tube I never used the Thermaltake TG-30 paste so the jury is still out on that. The Stencil on the other hand needs further comment: The back of the stencil is covered in an adhesive to STICK to the CPU while you apply the paste, a vague outline can be seen when you pull it off. The Stencil size is ideal for smaller Intel CPU's but must be centred for Ryzen and misses out the corners completely, not so good if one of the chiplets in in the top right hand corner like my R5 3600.

Después de aplicar una capa de aproximadamente 1mm de pasta sobre el procesador y la gráfica, las temperaturas se redujeron un promedio de 15 °C, regresando a un funcionamiento prácticamente idéntico que al que tenia mi laptop (DELL G3 15) cuando estaba nueva. Con el CPU usándose al 100% (IETU stress test) no pasa de los 90 °C y mantiene una estabilidad entre 78 y 85 °C (Con el CPU al 100%, 3.9 GHz). En modo normal, sin exigir al CPU (10-40%, 2.3 GHz) se mantiene entre 39-45 °C. La recomiendo ampliamente, después de un mes de uso actualizaré mi reseña.