EG STARTS 6X American Style Standard Arcade Buttons Switchable Happ Type 30mm Push Button 3/16" Terminal for Jamma Mame Kit Parts (Blue)

The springs in these buttons make more noise than my other buttons. It's not much but I notice it and it is disappointing. The nut portion of the button doesn't have much of a surface and I'm sure they would slip if I had to use them. I was able to reuse the nuts from the buttons I replaced with these.Also, these buttons fit in a standard 1 1/8" hole, but they fit more tightly than all my other buttons. This actually isn't a bad thing, because the button will be less likely to slip, it's just a little strange.All in all, these are just ok. I didn't use the switches they came with and I can't say what those are like.

They are buttons. They fit and they work.

Worked perfectly for my custom arcade cabinet. Good quality.

The photo makes thre green button like more like seafoam green, but the actual switch is a traditional green color. I had issues with a few of the plunger switches that were a bit loose in their holder. Thankfully I did not need every switch so I was able to find the right combinations that worked. The switches also have a springy sound, so if that's something that bothers you, look for a higher-end switch. Overall, they work fine for my cabinet.

They work and they work well. Sure they don't appear be the highest quality, but I think they will hold up just fine long term. My daughter loves purple and this was perfect for the project I built her. Two things. I wish that the switches on the end were small enough to fit through the holes with the button. The switches unclip, so they can be clipped into place after drilling and placing the button, but not ideal. I also wish the rings you turn to tighten them down were larger so that there was more surface area to keep the button tight and so it could be tightened down more securely. To be clear. They work just fine. These are minor things considering the price.

These buttons are nothing fancy - they don't light up or anything - but they do the job and have a perfect retro arcade look. Visually they look great and they seem durable. The mounting tabs for the microswitch have little nubs that perfectly snap into holes in the body of the microswitch.The long shafts on these buttons make them look as though they can be used in a thick control panel, such as you might build with 3/4" particle board or melamine in the style of an old arcade machine. Take note though, you will not be able to simply shove the buttons through a 1" hole in your material. For one thing the button shafts stick out slightly beyond the 1" diameter of the threaded shaft. So you can't just push them straight through. You have to kind of scoop the mounting tabs through the hole and then shove the rest in. But this doesn't work if the panel is 3/4" thick. There just isn't enough room.Perhaps a 1-1/8" hole would work, I don't know. Since I didn't have one I used my router to create a recess in the underside of my cover panel, so it's only 1/4" thick where the buttons are. This worked but was kind of a pain. The ideal thing would probably be to have a 1/4" thick panel.

Buttons work like they should. Only issue some of the holes on the micro switches were not properly drilled so I had to take a exacto knife and make the holes larger to fit the pegs on the buttons. Also I feel the micro switches take to much pressure to activate they should use micro switches with a lighter touch to activate.

If you press these at a certain angle they will not click, other than that they worked well for my project!

Buttons work very well good quality perfect for arcade 1up replacements

Perfect for a cabinet build!

Da qualche tempo mi venuta la passione per gli arcade game di una volta, così dopo aver preso un Arcade Joystick, con leva e pulsanti in "Japanese Style" ovvero i typo Sanwa/Seimitsu, volevo riprovare le stesse Ho preso questi pulsanti happ type, perchè volevo riprovare le stesse senzioni di quando da ragazzino andavo a giocare in salagiochi!Qui da noi in Italia i cabinet montavano tutti leve e pulsanti happ type, cioè proprio questi con superficie concava, una corsa abbastanza lunga e con una discreta resistenza alla pressione.Dopo essermi informato molto su i modelli disponibili gli ho trovati, sono proprio come volevo io danno appunta la stessa sensazione di una volta. Mi sono dovuto ingegnare un pò per montarli sul 8BidDo NES30, in quanto sono più profondi del case del joystick ma sono riuscito a con dei distanziatori a recuperare quegli 8mm che mi servivano!Soddifatto, ottimi!

Decir que los botones y los pulsadores van genial cuando los usas por separado, pero cuando ponemos el pulsador en el botón hay un pequeño problema que se soluciona fácilmente. El problema es que el pulsador es un poco corto y depende como toques el botón actúa o no actúa. He probado con otros pulsadores que tenía y van genial. Aunque esto es un problema que tiene que solucionar el fabricante, puedes solucionarlo fácilmente pegando un trozo de palillo plano en la pieza que aprieta el pulsador.Yo necesitaba 2 para los laterales de la arcade que estoy haciendo, ya que estos servirán para jugar al pinball. 👍🏻👍🏻👍🏻👍🏻

Sì, dev'essere di questo che parlava Goldrake. Questi bottoncini sono eccezionali. Non saranno rapidi e silenziosi come i Sanwa, ma l'effetto nostalgia anni 80 è fenomenale!Sentimentalismo a parte, i pulsanti sono solidi, con una buona risposta e resistenza, e facili da installare sulle tipiche casse ed 'encoder Zero Delay.Attenzione: rispetto ai Sanwa sono più profondi, e bisogna quindi avere più spazio nella cassa.