OREI UltraHD 4K @ 60 Hz 1 X 2 HDMI Splitter 1 in 2 Out 2 Port 2: 8-Bit - HDMI 2.0, HDCP 2.0, 18 Gbps, EDID, Duplicate/Mirror 4K Screens - UHDS-102

This is a fantastic product for what I needed which was to duplicate to two screens from a pS5 for multiplayer gaming and it works fantastically. It will always default to the lowest resolution screen so in my case 1080p so I was unable to test it out with two 4K screen but from my experience it was as simple as plugging in the HDMI'S required and and the power supply (not supplied but a 5V plug is relatively easy to come by) and setting up the brightness and screen size and that was all there was not discernible lag and no issues with picture quality. If this is what you are needing it for do not hesitate as it is a fantastic machine for the job.

HDMI splitter, old one was playing up, replaced with this one and no problems. Recommended product.

Note each screen shows same image but that is the function of the splitter and is expected

After purchasing many splitters that say they put out 4k but don't. I can confirm this actually dose 4k and ultra HD content. From my virgin media box to my Samsung QLED TV. Iv only had it for a day but it does what I wanted to to do.

I am using it to send the output from my Sky Q Box to my Living room TV and a bedroom TV via a 6 metre HDMI cable. Sky Q has 4k HDR output, Both TV's Have 4k HDR. The only small point is the LED's on the front are extremely Bright and distracting. I have put some masking tape over them to reduce the glare. VERY IMPORTANT, the EDID switch on the Orei UHDS-102 must be set to TV to allow HDR passthrough. So far the unit is working perfectly and the bonus of Sky Q is that the remote is Bluetooth and can be used from the bedroom to control the Sky Q box. Much cheaper than paying for Sky multiroom!

Not what it said I could do. And it arrived to late for it could be returned

This was the second HDMI splitter I bought, the first one was light, cheap feeling. And didn't work! This feels heavy, feels quality. And more importantly, works straight out of the box! 4k 60hz! Pay the little bit extra and get this instead of them black boxes with "HDMI splitter" on the top.

I've had several HDMI splitter over the past couple of years and always have issues with them, no sound or picture is the most common issue I've experienced however this one works perfectly, connected my PS5 to the input and then my PC monitor to output 2 and TV to output 1 and everything worked perfectly. I'm getting picture and sound on both and so far no issue. I will be trying a HDMI switch to see if that works as it seems adding a switch to the mix seems to cause more issues.

Bought this to use it on the PS3 ( didn’t do much research because it shouldn’t be that complicated) but it DOES not work on it. It goes well with the PS5 and stuff. But had to send it back because for me it was the worng product

Perfekt...klappt sehr gut

fungerar perfekt

Répartiteur fonctionne parfaitement après plusieurs mois d'utilisation et surtout on peut l'utiliser dans les 2 sens.

I had purchased this item in order to get a reliable working connection from my thunderbolt enabled Blackmagic Mini Monitor (which is a video streaming device for video professionals) to an LG OLED tv. It does that job pretty well. If I try to connect the device directly without this splitter the TV doesn't seem to take in the HDMI Signal. My current assumption is that, either the splitter adds HDCP to the output signal or it just gives out proper 60Hz frequency which probably my streaming device is not outputting (all though the device used to work directly without the requirement of a splitter when it was connected to a small 24inch ips lg monitor. Additionaly, so far, I haven't been able to actually get two HDMI outputs from a single input which is what this device is natively supposed to do. But I would chalk that up to some complication arising from the fact that the origin of the HDMI signal is the Blackmagic Mini Monitor complicating the HDMI protocols.