Under Cabinet Lighting Kit, Curio Display Case Lighting, Dimmable Wireless RF Remote Control, Linkable Wired LED Puck Lights, AC120V to DC12V, Hardwired or Wall Plug, Daylight, 14 Lights

The lights are simple to install, but they do not work.As with any project, I tested the lights for 1/2 hour before installation.They are simple to use and installation was about 45 minutes.Once turned on, the light stayed on for about 1.5 hours and everyone failed to work.I thought maybe something I did, so I took them down, checked the connections, tested andreinstalled.The lights lit up, but only for about an hour, then they dont work. Oddly about 5 hours later they came on.But did not last long.Very poor quality, waste of my time. I went to Lowes and bought a set of puck lights and they workall the time, every time without any failures.

After spending an afternoon of pre-drilling the wire holes through the under side of the cabinets, hard-wiring each light in order to not have extreme amounts of wire loops where lights were located closer than the combined 30" of wire leads, taping the wires to the underside of the cabinets, I turned on the lights. OMG, was I in for a SHOCK. LITERALLY. The light rendition described on the ordered product was NOT 3000K. These lights are under the cabinets and with a light gray wall. The walls look GREEN. The color rendition is more like a 2500K and the output is RIDICULOUS in appearance. The picture shows what I'm describing. The lights under the microwave are a true 3000K bulb. I WAS NOT HAPPY after all the hard word for what was to be a 'simple' project. BTW, this is the third set of lights I've installed. The first was for our old house by a different vender/supplier. The second set was for a relative and was ordered from the same vendor/supplier. THIS SET was for our new home. I was NOT ORIGINALLY HAPPY AT ALL. This set was ordered from Lvyinyin. (SEE UPDATE BELOW)UPDATE: The seller contacted me quickly and, they're replacing the original set with the NEW ITEM #B07KG5DHVY. By the online reviewing of this NEW item number and adjustable color settings, I feel the seller is doing an outstanding job of being willing to quickly resolve the issue.Once I receive the replacement set, I'll update if needed. Otherwise, I'm extremely happy with the quick action of the seller to make it right with the replacement. Thank you.

The lights are beautiful and easy to install. There is a "Y" connecter that is part of the wonderful wiring assortment, but mine makes half the string go out if it's touched even the slightest bit. We didn't find this out until after a complete installation, so I emailed the vendor asking for a new Y and got absolutely no response. Ended up splicing to fix the issue and love everything otherwise, but it would be nice if they could help out AFTER they get your money.

These replaced self stick led strip lights I was trying to install under shelves in a glass fronted dining room cabinet. While I had issues with the led strip lights and removed them and returned them, I had no issue with these and I also purchased the additional 5 foot extension cables. I had no issue installing them and completed installation in 2 1/2 hours. Previous reviewers indicated issues with the connection between the lights. I had no such issues, however when you connect the lights together you must be careful to align the tiny plug correct and ensure the little prongs guide correctly in to the other side of the plug as well as making sure one side of the connection was not installed upside down. They only fit one way but if you use force you can connect the plug the wrong way. I had to use a magnifying glass to see the little connector as I was connecting the lights and had no issue with any of the connections. I installed 12 lights (two per shelf) (3 shelf's on each side of the cabinet and wired all together with the extension cables and did not have any failures. I would buy these again for future projects.

Got these to replace the old halogen lights that came with plastic housings. Over the years they became brittle and the locking pins on the lens covers were breaking when trying to replace bulbs. The housing on these are aluminum and the lens covers are machined and screw on/off. The only drawback you may have is under cabinet installation. Being LED lights, you can't just replace a bulb if it goes out you'll have to replace the entire unit. So give some thought to having access to the wires going to each individual unit. I epoxied a small metal tab on back of the housings going under my cabinets and epoxied a small magnet under the cabinet. Would have given 5 stars if there was an assortment of wire lengths available for connecting the lights together.

We installed two controllers because we have a split kitchen. Depending on cabinet size, we put between 1 to 3 pucks under each one which is plenty bright enough – more than I was expecting. We like 2700k/warm white, and the lights seem true to that color temperature (many cheap LEDs are closer to 3000+k for warm white).Like other mentioned, the connectors can be tricky. Make sure the male pins are aligned if you are having trouble connecting cords. The cords are a little tricky to separate once together as well.For the two modules, 90% of the time both sides of the kitchen turn on/off via the remotes. The other 10% sometimes only one of the two sides will flip state. Considering that this is RF and that the receivers are less than 15 feet apart; I am surprised and somewhat annoyed that they ever get out of sync.All in all, they are a cheap, easy way to add under cabinet lighting on a budget especially if your kitchen layout won’t easily accommodate hardwiring.Hopefully they last as long as stated; we bought more lights than we needed just in case one fails randomly.One idea that might help you hide wires, staple a zip tie to the backside of the bottom, front of the cabinet and zip the extra wire there.