KAISH Purple ST Strat Pickup Covers Knobs and 5 Way Switch Tip Cap

used these on a fender squire. Sound knobs fit good. Switch tip is too big, so fits loose. So I used narrow slice of masking tape to wrap one time around the switch, then added a little glue to inside of switch tip and it fits fine. The pick up covers are terrible, hence giving this set of replacement parts a 2 star. Only one/two holes lined up with each of the pick ups. Had to use a series of 5 drill bits on each hole to enlarged each hole until most lined up. The holes that were still off a little had to be drilled out more on one of their sides, making them a bit oval. Came out looking good, but I did manage to crack one of the covers cuz I tried to hurry by skipping a bit size (DON'T DO THAT). Company should take these back to the drawing board, but probably won't when they keep reading that people will drill out the holes. I replaced white parts with a Deandra aqua pickguard and aged white knobs/etc

For the price they're good enough, but the quality is poor...thin, lightweight plastic and the numbers/letters on the knobs are not as crisp as originals.My biggest gripe is that the pickup covers are a different shade of "aged white" than the knobs. The product image makes it look like everything is identical. Not mine.

I have tried to get them to match up with 6 different strat clones and the only thing I have found that they will fit is if the strat has a single coil slanted pickup at the bridge. They will fit that one pickup. Other than that they don't fit. The guitar I wanted to use these on has a humbucker at the bridge so can't use them on the guitar I bought them for. Major fail!

I was upgrading the physical look of my 2003 Squier Strat, and I was originally going to just change the pickguard from a plain white color to a white pearloid, but when I put in the new pickguard, the pickup covers and knobs looked off-white compared to the new pickguard.So, I bought this product and it looks way better. It comes with 3 SSS pickup covers, 1 volume knob, 2 ton knobs, and a five-way switch cap. Great visual upgrade.

I thought I measured correctly. 2021 squier bullet strat SSS. All the squier pups are the same size. All these pup covers are the same size. But they dont fit. Theyre about 3-4mm maybe longer than the squier covers and the magnet holes dont line up. Plastic looks cheap but so is the price lol. The cream color is great though. Unfortunately I have to send back.

Yes, these look great. I gave five stars because they will probably work for most single coil pickups. They will not work for Fender noiseless pickups. Those pickups are too tall. The knobs and pickup selector “thingie” fit perfect.

These are Fender Stratocaster specifically sized if you have a strat knock-off chances are they may not all fit witch was my case I had to drill the holes a bit to make them work except for one of them it fit perfect the knobs were just fine as well as the switch knob but for the price it is forgiven so my rating is low just based on my experience.

Great quality, just be Shure to measure the distance between pool pieces before buy!The color is great the aged white it's brighter than the picture. In pictures you will figure it out the color against the pure white and the pick up covers in a Schecter Nick Johnston

I know the description says us mim guitars but having owned 3 mim strats im pretty sure the pickup covers won't fit those either as they are all the same size and won't fit through the holes on a standard stratocaster pickguard.Knobs fit fine but I have an arctic white bullet strat with an ivory pickguard, white pickup covers and aged white knobs so....Looks a bit odd lol 🤨

I really like the parts. They are pretty exact and I don't think the photo does the colour justice. It's really nice and does have an aged look. I have lots of single coil pick ups and tried these on many. Some old vintage pick ups( late 50's) I tried weren't perfect as the plastic is very slightly thicker than old vintage covers and don't allow the lowest pole pieces to show level with the top of the hole ,but they did fit perfect on more modern pick ups (and not just Fender too). I wanted them to refurbish an old JV 57 Strat. I had fitted a humbucker in the bridge and decided to put it back as normal. The 2 pick up covers I had look very dark and these made a great replacement. The guitar has a lot of worn and even rusting parts and putting on nice new white ones wouldn't have looked right. The controls are worth the money alone. I did age them a bit by carrying them in my pocket with all my coins for a couple of days and I also used a bit of black acrylic paint. Comparing the controls to originals I cannot see any difference at all. I like how they look against a white pick guard. I really like this set. Great for that aged look.

As you can see they don't fit two pickups, only the wide one.The other two need to be different, wasted my money.

This is a great little kit to accessories your strat - they fitted perfectly on my Squier tele, and really changed the look of the instrument. Fast delivery, product above expectations, no complaints!

Colour is nice...however, the pick up covers are the wrong size by a couple of mm, so cannot be used. The switch knob and tone/volume knobs fit ok, but not the pickup covers.