Wooden Dowel Rod, 1/8 Inch x 12 Inch Wood Dowels, Pack of 100 Wooden Dowels for Crafts, Unfinished Hardwood Wooden Dowels Rods, Strong Wood Rod Dowels for Crafting and DIYers

Maybe I was just lucky, but these are the BEST dowels I've seen in a long time. I pulled 10 dowels at random from the pack of 50 and checked them for diameter, roundness and straightness. I measured each one at several points along its length. 9 out of 10 measured within+/-.002 of the nominal 3/16 diameter; the 10th one was about .006 undersize. As I slowly rotated each dowel, the diameter measurement varied only about.001. Wood dowels are never that perfectly round!One dowel has a slight bow, about 1/16 at the center. The others can be considered perfectly straight. Again wood dowels are rarely that straight, especially small ones. The wood appears to be birch, and is smoothly sanded.If precise dimensions matter in your application, I would recommend these!

I needed a large number of 5/16" diameter dowels for a unique project, as inserts into the slots of a large piece of extruded aluminum furniture I was building. The dowels were going to be painted black and then gold wax used to give them a brass metal look which required the dowels to be relatively grain free, without defect, and exactly 5/16".I originally went with a large purchase of dowels from Home Depot because they were very cheap, less than $1 per 4 feet, but the size and quality of these dowels was all over the place. About a quarter arrived broken or chipped or with voids or knots and another quarter were either larger or smaller than 5/16". I returned them and after reading the reviews of these, purchased a box of 100 4' segments. I am glad I did.I'll say first that of the 100, about 10 were bent enough that they would not lay flat on a surface. That did not make a difference to me as my dowels were being inserted into metal channels which straightened them out and frankly, 1/10th being bent is still a far better success rate than HD/Lowes/etc. All of the dowels were free of defect, well sanded and ready to use immediately. I did no prep at all on them except spray primer and they took paint and wax very well.If you plan to paint these but want a smooth surface, you will likely need to use fine grit sandpaper to knock the grain down after painting. That would be the case of nearly any raw hard wood though and I found a few passes of 400 grit did the trick in no time. If you need to cut these, I would highly recommend a thin kerf pull cut dowel/dovetail saw. Any small cheap one will do but you definitely want a pull blade, a push blade will cause splinters. Yes these are soft enough you can cut them with tin snips or even the mini saw blade on a multi-tool, but the end will be slightly deformed.If you have any furniture or arts and crafts that requires good looking dowels, these are the ones you want to get. Don't even consider the big box store.

Perfect for my crafts. Great value

Overall, I really liked these, they are useful for my purposes and I would recommend them to anyone who needs a small diameter dowel. Many good points. However there are some (very) minor issues I would point out.Good: The dowels are all a nearly uniform 12" length. They are sturdy birch wood and stand up well to normal use. They came intact and without damage. Good quality wood product. Again, I would certainly recommend.The minor issues:1. The dowels are a slender 1/8" (read they are VERY slightly less than 1/8" in diameter). If you need a snug fit, you may have to adjust. In case you don't know, variance like this is very common in any milled piece.2. There were not exactly 100 dowels in the bag. There were 96...again very minor.3. Being hardwood, there may be some bow in the wood. Nearly all of the dowels were perfectly straight. However, there is some warp in some. The good news is there are many methods to remove this bow and it isn't a show stopper. The bow was minor and wouldn't affect most uses. My particular use requires nearly perfectly straight pieces.4. Some other folks have mentioned splintering. I saw none of this other than very minor milling burrs. What I do before I use any of these pieces is rub several pieces vigorously together in the palms of your hands. Similar to how many people rub wooden chopsticks together before using them to eat. This is a good method to eliminate any little burrs left on the wood from the milling process.Again, overall a great product that I have bought on two occassions and will buy again when needed.

They seem to be a good quality for the price! Smooth and straight and very uniform. However the package only came with 93 dowels instead of 100 which was unfortunate because I needed exactly 100 for my project, which is the reason for star deduction!

I like these's for crafting! Good quality!

Purchased this bundle to help with a Long House school project to serve as the frame.I was surprised how good a quality of wood these dowels were and the uniformity their in length and diameter.They were easy to manipulate and cut for the kids to complete the project.I will consider this route next project as it was convenient and effective.

Love it. Craft use .