waveshare Capacitive Touch 5in Raspberry pi LCD HDMI Display Module, 800480

Received a different display compared to the one advertised.HDMI and power port are in different locations. The screen I received looks like it was designed to be mounted directly on a RPiShould also be noted that you don't receive a HDMI or power cable (as shown in the pictures)Not able to use the screen as intended, will be looking for a different model from a different sellerThe screen most likely works, but extremely disappointed as it does not represent what is advertised

You wont get the screen in the pictures you will get a screen thats not compatible with a pc(windows) its just for raspberry pi

جوده ، اختيار الإضاءة المناسبة ، سهله الحمل والتخزين مع واقي حماية على الشاشة ، انصح بالشراء

Habe 2 davon im Einsatz für 2 Internetradios in Verbindung mit Raspberry Pi3. Laufen immer noch einwandfrei. :-)

Currently own a Robo3D R2 printer and have never been satisfied with the resistive touchscreen that is used on that product. I got this screen from Waveshare to replace that one. Another person on the Robo3D forum figured out what needed to be changed in the Raspberry Pi RoboOS software to change from the resistive GPIO touchscreen to this capacitive USB touchscreen. As an additional benefit the OSD on this screen allows for some adjustment of brightness, contrast and saturation. It is worlds better than the original screen. This is what any printer that is $1200 plus should have included in the first place. If you are looking for a replacement screen you should consider this as an possible upgrade.Waveshare also has been a good company with good products, I have tried cheaper rPi screens and the Waveshare products have always worked and worked well.

Tiene bastantes funciones, buena calidad de imagen y el táctil funciona muy bien. La única pega que le pondría sería el ángulo de visión.

Works with Asus tinker board s no drivers needed. Touch is single as I am using armbian OS. However On windows OS it's more the single touch.

Großartiger Bildschirm. Auf einem Raspberry Pi mit Ubuntu Mate einfach einstecken und sowohl Bild als auch Touch funktionieren out of the box. Die kapazitive Touchfunktion reagiert sehr gut und das gehärtete Display macht einen robusten Eindruck. Je nachdem wie der Bildschirm eingebaut werden soll, sind die Anschlüsse für HDMI und USB allerdings u.U. störend. Das lässt sich aber mit passenden Kabeln lösen.