JDM ASTAR 1260 Lumens Extremely Bright PX Chips 7440 7441 7443 7444 Amber Yellow Turn Signal LED Bulbs

The product is really good and it’s way above my expectations. I am very much happy with the product and would definitely choose you for my next purchase. The delivery was also quick and reached before the mentioned time.

I installed these as the front turn signals in a 2019 Toyota Tundra. While the headlights are LED, the turn signals are not, and they are almost invisible in daylight and are easily drowned out at night being next to the LED headlights. These have got to be at least twice as bright and are easily visible from a distance even on a bright sunny day. Only had them for a week so can't say how long they will last, hopefully I will get a few years from them. Going back to regular bulbs is not an option, I can't see how they could possibly be street legal as they are almost invisible by comparison to these.

After having blown my signal and tail light fuses in my Toyota vehicle with non-CK bulbs in the past, I was concerned that I would need to rewire these when I received them. I set about disassembling the base on these to confirm the wiring wasn't going to short my fuses and was surprised at how much glue was used to seal these bulbs shut, which was very different than the previous LED bulbs I've purchased in the past. Once inside, I found that each lead led to the circuit board independently and didn't share the leads for the ground like every other bulb I've had in the past. Testing with a 9V battery showed that no CK style connection led to a short, so I reassembled the bulb and installed it in my car. The light output was very bright, and best of all, no popped fuses! I really like these bulbs and will definitely order another set when these burn out.

I used these on a 2019 Tacoma and they are much brighter than the stock halogen bulbs, and also look great in the housing as well. If you're looking to upgrade your turn signals to LED for that modern look, these are a fantastic option!

I installed these bulbs for front and rear turn signals on my 2016 Nissan Altima. I have the “B” model which comes with LED headlights and LED daytime running lights. They are as advertised. They are very bright and a nice amber color. Darker amber than the stock 7444na bulbs. Some buyers state that you only need the load resistors installed on either the front or rear, but not both. That is not true. You need one per bulb so front and rear require 4 resistors Be sure to screw the resistors to a metal support and away from anything plastic. They get extremely hot if left on for a few minutes Don’t use plastic wire ties because they will meltAlso be aware that these bulbs are about twice the length of stock incandescent bulbs so check the lamp housing by removing the bulb and inserting a pencil into it and measuring the depth They are just under 2 3/4” longI am very pleased with the bulbs and recommend them.

Made a massive difference to my 2019 tundra. The Halogen blinkers that are on the tundra are used with the led headlights so you can barely see them. The instant on and off of the led also makes for easy to see blinkers.