MG Chemicals8481-1 Premium Carbon Conductive Grease, 3 fl. oz, Black

I use this for a connection from my truck to an inverter. The connector is exposed to the elements under the hood when the 8000 watt inverter is not hooked up to the truck.This is extremely conductive grease. When using the inverter, I often pull 3-5 minute loads of over 500 amps and this grease keeps the connection good enough that it does not get hot. It is, IMO, as good as bare metal connections, with the added ability to keep the metal connectors corrosion free.Good stuff. Kinda expensive but you use so little that a tube will likely last your lifetime, so it isn't that bad. It does wash off, you'll need to reapply about every 4-8 months.All in all, it is a good product that does what it is supposed to do and a fairly decent value

Good stuff, but don't get it on your clothes

Helped fix an intermittent connection issue with a bulb plug. Be careful, it gets EVERYWHERE.

Improved connectivity and made plug slide in and out of wall plug much better.

It was black, thick, and slick and I presume conductive due to the black carbon in it. Only time will tell if it does an adequate job of lubrication on the switch points of my welder. The carbon in the grease is supposed to minimize electrical arcing of the points when they are switched. Again, only time will tell if it is effective in doing that. So it is really too early to make an adequate evaluation of this product.

Good product. Critical for electrical jobs.

They can make a smaller tube of I'm to

It fixed an electrical problem I had on a car. Still working 2 weeks later.

Bachmann split-chassis? Enough in this tube to lubricate hundreds of locomotives and ensure electrical continuity. Does not seem to affect the nylon bushings or other plastic. Black grease. Perfect.

Gerade auf einem Karton einen ca. 5 cm langen Streifen angeschmiert und el. Widerstand nachgemessen. Mehrere hundert kiloOhm (!) Ein dicker Klex ca. 5mm x 5mm x 5mm hatte 2,1 kOhm

As the title eludes to, this grease is messy stuff. I highly suggest wearing disposable gloves and using the dispensing tip that comes in the package with the tube of grease itself as you don't need much of this grease to thoroughly coat anything you need to use this on. I mostly use it to coat ground connection points on vehicles since this grease doesn't wash away easily and is electrically conductive, so it prevents corrosion and ensures a solid connection will be present for the forseeable future.You could use it on electrical connectors/terminals as well, but then you'll need to be very precise in your application of this grease as again, it's electrically conductive, so any stray grease could potentially bridge connections and cause much bigger issues. But as long as you keep this products attributes in mind while using it, it's a fantastic product to have around and the tube is big enough and you need so little at a time that this tube should last you for many years.

Graisse utilisée sur une antenne CB pour refaire le contact de la prise SO239 d'une Yagi. 👍

no es un buen conductor.