G.SKILL RipjawsX Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL10D-16GBXL

If you want to take full advantage of an older PC's (I have a z77 extreme4 MB running LGA 1155 intel CPU) RAM output this is a very good choice.this RAM rates at 1866 hz but if you leave your bios to it's default it will only run at 1600. So make sure to go in and tweak your RAM settings in your bios to have memory run at 1866 (or 1867 whichever it lists) and change the clock to 133 hz ... that is 133.33333 x 14If you don't set both correctly you'll get system crashes and stuttering performance, if you leave the deafults it will run at 1600 clocked at 100 (slower) that of course would be 100 x 16

Item was working as adverticed, would recomend this if you have an old pc with ddr3 ram modules

good!

Product as described. Works as described and had no issues. Just prepare shipping can take a week or more. I would complain about that, but I also don't like being unrealistic. I gave a lower rating on price, because the first set I found a few months ago was about $40 cheaper. Also to be fair these probably aren't produced any more and is a great solution for decent quality RAM.

I built my Rig from scratch. Unfortunately, one stick worked like a charm, but the other was a complete dud. It set off the beep code of doom no matter which slot it was in whether partnered with its twin or not. I knew it had to be replaced so I set it up to be returned and replaced. So,here I am: I reported the problem on Feb 28th. A day later I had to drop it off at UPS (The 1st). I have to wait till it arrives back with them on the 7th... Only then will they ship out the replacement which should arrive sometime the week of the eleventh. (Which is an eternity as an amazon prime member use to getting two day shipping x.x)Anyway. They were polite, responsive to my emails, and appear in every way to be courteous. Just not as fast as I'd like.I will come back and update this review once I receive the working set sometime a week or two from now. Hopefully I will have a lot more positive feedback concerning the memory itself. :)

G skill and Corsair are all I have ever used since 2001. 15 Years of minimal issues, and nothing seems to have changed there in my experience.It would be nice if there were more color options to suit speed, size, etc. But oh well.Great RAM, that works. And if you like Red.. even better.Major plus that this ram is on tons of approved vendor lists from Motherboard manufacturers as well. Make sure you check your mobo manufacturers approved list!

Worked great with the setup. But it really not 1866mhz ram. So how did i get it to 1866mhz well you have to change the xmp profile into the bios and your all set.Update 6 month later one of stick went bad.Gonna send it back for rma. I've been trying to install the oculus rift software for at least two days. I think this was the route cause.

Came nicely boxed great memory love the stile of G.Skill memory and never had no problems at all with it.It detected it as a cl9 but when I changed the memory in the bios to ddr3 1866 pc3 14900 it detected it as cl 10

The RAM arrived on time, sensibly packed. But not quite as described...slightly BETTER!!!It's described as CL10 (10-11-10-30). In fact it turns out to be the slightly faster (9-10-9-28). So no complaints at all!

Looks good too. Works as it should and sits very nicely in my case. Quite expensive for what it is though.

Gkill has been my number 1 choice for years and never had a single issue with them. I purchased at least 10 sets for the past 10 years and I am a satisfied costumer.

While those things on top look cool, them being present can make it more difficult to place or even impossible to use if a large cooler tower is in use on many boards. Other than that this stuff is very stable