LevitonVP0SR-10Z, Image

Read and understand the warnings supplied by Leviton with the product. This is the real deal, don't mess around. Okay? Okay.The device installed perfectly, it is well built, typical for Leviton of course. I like the action of the device.I also like the fact that I no longer get thrown off by the switch position on the 3 way set up. "Wait the switch is up and the lights are off, huh, oh yeah 3-way ..." I still have not gotten over that! LOL!One caution on this and the related occupancy sensor, if you have the smaller "jiffy boxes" (junction boxes) these are a VERY tight fit. You may have to actually grind / file off some parts of the junction box to get them to fit. If you are an experienced electrician or DIYer, this should be no problem. If even touching the electrical still scares the bejezuz out of you, this might not be a good project right now. But, hey, go for it! That's how you learn.I, personally, wrap the switch in electrical tape so there is no way anything can ground out to the box.

I finally settle for this switch and its companion switch after long search for Z-wave switch to work with my Trane XL850 thermostat and Amazon Echo. I have no problem replace these switches on my 3-ways circuit after study the various diagrams provided on the manual. The only complain I have is, that when using voice command thru Amazon Alexa to turn on the light, the light will turn on at full bright. You have to tell her to turn on at certain level, you will have to say " Alexa turn on the light at 30%" otherwise if you say "Alexa turn on the light" it will turn on at 100% brightness. Other than what I have said, this switch work great.

I used the Leviton VP0SR-10Z (no LED) companion remote switch in combination with the Leviton LTB30-1LZ 3-way count down timer, to control a bathroom fan from two locations. It works great and was really easy to install. The shipping from the vendor Fire and Safety Plus, was also very fast. It was shipped the same day I ordered it, then arrived two days later on Saturday. This was a very pleasant surprise, since I didn't request (or have to pay for) expedited delivery.

the switches with a dimmer barbars are not tactile friendly--they're too small, one must use a fingernail to press the bar hard enough to get it yo dim

I purchased this to be a remote for the Leviton VPT24-1PZ. The instructions included don't correctly list the wiring needed to connect to the VPT24-1PZ; but if you review the instruction that came with that timer, they do list the wiring needed and they work.This seems to be just a momentary switch in the configuration I needed, but it costs far less than any momentary AC switch you can buy, so it's a good purchase.

Lots of capability in a small package. It programmed correctly the first time and has been problem free, doing exactly what I wanted it to. It was easy to install but a good knowledge and understanding of wiring circuits is advisable to make the conversion from standard switches to this system.

I have trouble to make this work in a 4 way setup. The one in the 4 way box can only turn on light but not off... Other 2 works fine.For the one in the 4 way box, i connected two red together with a wire nut, and connected 2 black to the YL/RD terminal, and also connected the neutral, have no idea why this wouldn't work

Some people believe that this item can't be used if they have LED lights and opt to buy the coordinating remote w/LED. This is NOT the case. The remote with LED simply has a LED indicator light that tells you when the lights are on due to the fact that this, nor the Vizia Timer acts as a true light switch. It is a push to turn on and a push to turn off, not a rocker like a normal decora switch. Everything wired up perfectly with the timer. The main thing is that the timer itself needs to be installed in the j-box where power is present and this coordinating remote has to go where the additional switch is. Simple use of a multi meter will tell you where power is coming in (don't get it confused with the power coming off the 3-way switch leg though).

Works great with Vizia+ timer switch. Great instructions included.

Works 3-way with a timer switch in the garage LTB30 / works well, that switch is a one-button push and activate the last button pushed on the timer switch. Not wired as a usual 3-way switch but not that much complicated to install.

I bought this to coordinate with a timer switch and this switch works fine what it is capable of wasn't obvious. Essentially all the remote can do is turn on the lights at the remote location and at the same previously selected interval, it can not be used to turn off the lights immediately which is fine for me, but other may want to know that. The quality is good, and I appreciate having all the color options included in the box.

Works like a charm. First time. You need to use in conjunction with a timed Leviton three way switch controlling the same device from two different locations.I used it on a bathroom fan. The timed switch on the bathroom wall where a regular bathroom fan switch would be. This remote switch is in the adjacent laundry room, so the same fan is used for both the bath and laundry room.

These are not easy to install and I would also deter a novice DIYer to pick these up. You will have to contact Leviton directly with exactly what you are intending to do to confirm that the switches that you are buying will work for your intended purpose. These switches only pair with a specific grouping of parent switches and will not work with all leviton remote switch applications. Tech support was willing to help but i did not endup getting what i needed as it was beyond my electrical skill level.