Pro-Series Magnum Gobble-Dot All-Metal Sight with Elevation Ramp for Ventilated Rib Guns

Perfect fit on a Stoeger pump gun with 6mm rib. A tad snug but some light encouragement with a rubber mallet seated them perfectly to the point I would venture to guess they would stay in place without the set screws. I agree with others who stated the fibers seem a bit small but that's not necessarily a con IMO. I replaced the front red fiber with a green one to match the rear (these old eyes have trouble with red) and now have a clear and bright full sight picture. The green gathers and projects a much sharper and clearly defined dot. Set screws are somewhat small and I could easily see getting too heavy with torquing them down and stripping or breaking them. I put just a touch of blue loctite on them, snugged them up and then gave them an additional light bump. Threadlocker will somewhat lube them allowing ease of installation versus dry threads so don't get too heavy handed with the included hex key. I don't foresee any issue's and these should do fine for turkey season.

Looks extremely nice and very well made,but did not fit my gun as advertised, (CZ 612 Magnum waterfowl). The provided shim added too much thickness to get the sights on the rib. Without it they would not really secure fully. Mine is an 870 clone but it seems to be non-standard in some dimensions except for the inner action mechanism. If you were getting this for a regular Remington 870 I have no doubt it would fit just fine. Each situation is unique of course. If one wanted to in my situation, they could use a thinner piece of plastic and make their own shim, it would be a simple fix but I gave up and decided to mount a red dot instead. But it's a really nice quality set of irons with a really fine aiming point. I'd say it's a good value for how well made it is, that's Truglo for you. Never been disappointed with one of their products.

Great idea poor execution. They fit snugly on rib but the rear sight will not get tight on the rear sight base. To the point of nearly stripping the tiny screws and it can still be moved with your fingers.

Ok I have a new browning A5 12ga. I will tell you that online the spec sheet says it has a 1/4” rib that is not true. It’s to big on the rail. I bought the 6mm and it fits nice and snug. It’s nice it’s fully adjustable as well. Definitely worth the money.

This sight feels very well made. I believe my 870 vent rib measured 0.29" and this fit well. Unfortunately, I did by an open box item with a damaged screw, clean shear. I do intend on purchasing a new one in the future, but already got my gobbler for now. Would absolutely recommend this sight set, but open box is a gamble.

Good quality. Would buy again.

I really like these sights. They are not very big but big enough. They are very easy to find. They install super quick and feel very solid! Very happy. I'm going to got put some 1600fps slugs through the shotty and see if they stay on I'm 90% sure they will stay put though. They feel really good. You can get the screws nice and snug no problem. I will post update if the fall off with heavy use. If no update they stayed on and I'm stoked.

The Windadge adjustment screw is difficult to tighten. Mine came already stripped out. Once you get it where you want it I recommend using JB quick weld to hold it in place. I contacted the company and let them know of my issue. They do not have extra screws for you to buy and only offered a 10% discount on a future purchase.

This product is great! Very solid steel construction fits perfectly on my Winchester sxp hybrid hunter the sight picture is perfect!

Works well on Maverick 88

Le point rouge avant est minuscule.. je n'aimais pas la mire pour ça. Malgré tout cest bien faite.

Installed these on my 12 gauge. I know, its a shotgun, but what a joy to use when hunting birds. Lines up nicely and the sights glow very good in low light.

Works really well. Exactly what I was looking for!