OREIHDMI Extender Over IP- 1080p@60Hz Upto 330Ft with CAT6/7 Cable (Receiver only) (EX-330-K)

Quality is good. Nice size

These seem to work like magic connected to a switch. I tested with a dumb unmanaged switch and got video just fine. I next tried a dedicated VLAN on my managed switching and it worked like magic with 1 TX unit and 2 RX units. My switch said they're doing multicast, but I see outbound/TX traffic on ports belonging to the VLAN even without RX units attached. 1080p video appears to be about 300 MBits, so fairly large amount of traffic.But I can't see any signal degradation or quality issues.

I was working on a project to connect three televisions from one side of our church to the other. We had CAT6 cabling installed for the project and just needed a device that could take the signal to the three televisions. This product looked perfect for our use, so I ordered it to give it a try.This worked immediately upon plugging all the parts together and to power. We had signal and the picture was clear and crisp. A few adjustments to the resolution and we were ready for action. This was wonderful by itself, but these devices have the ability to loop from one to another so that we can send all three signals out without needing an HDMI distributor.I immediately purchased two more and now we have all three televisions showing the same picture. The only issue that we had at all was that one of the signal boxes did not work until we changed the resolution on the television - which was different than the other two. But we figured that out fairly quickly and now are thrilled with the final results.I could see myself purchasing another one of these to be able to put the signal from one television to others in my home as well. The loop out feature is fantastic for multiple displays and I could see some great uses for this technology.If you are in the market for an HDMI over CAT6 device, this one is great!

Easy setup and extended my 4k security NVR screen 72ft over Cat6 Ethernet cable. The IR function lags a bit, but is very usable. Bought additional receiver for another screen. Note if the transmitter is connected to a 4k input, then all receivers must have 4k screens connected. The receivers will not scale down to match the connected screen capability.

Worked perfect over my VLAN for my Ubiquiti network. Also worked just plugging in and running on the same network as my TVs and computers.Gets assigned an IP and just works when you plug it in. I am very happy with the ease of the install.