Prominence Home Ashby Modern 52 Inch Ceiling Fan with Light, LED Fan with Remote Control, Tri-Mount Indoor Fan with 5 Blades, Brown Oak and Light Oak Blade Finish Options, Soft Gold (51474-01)

52" Ashby Ceiling fan Model 80094.Fit and paint finish of blades and fan body is excellent. I've installed ceiling fans before so this was an easy install. Comes with a blade balance kit. I didn't need it - it balanced PERFECTLY.Light lens is made of GLASS. No cheap plastic to yellow as it ages.This fan really NEEDS a FINISH RING around the base of the fan (a ring that obscures the gap between the ceiling and where the fan is mounted to the ceiling). I hope the manufacturer sells one as an option, because I could really use it. It is a nice touch that really makes the fan look classy, and would vastly enhance the look of this very good looking fan. The ceiling electrical box in my new home was incorrectly installed by the builder at a tilted angle with some of it not flush and protruding slightly into the room (see images). This offset makes a flush mount impossible as the fan would sit at an angle on the ceiling. The down-rod install takes care of fan being plumb, but as shown in the image the ceiling cover is crooked, and shims won't work. This is where a finishing cover would help. It would also hid the unpainted set screws for the cover. See the image of another fan that compares that same fan with and without a finishing ring. Big difference huh! Note that this is not a bash on the manufacturer, ANY ceiling fan brand would have this problem with my improperly installed, crooked electrical box.My installation has separate wall switches for the light and fan. I wired the light switch directly to the light circuit of the fan bypassing the receiver. I do not need the light delay features of the remote, so I wired directly. You could bypass the receiver as well, but then the fan would only operate at high speed. I need only the medium speed, so the receiver was wired in and I use the remote to select the speed. Fortunately, the receiver RETAINS the LAST STATE when the power is turned off. So if you have the fan on medium and the light on, and you turn off the main power, the receiver remembers that the fan was on medium and the light was on when you restore power. That is a good thing if you are not wanting to use the remote all the time or at all.I've used this to replace a nice old Hampton Bay fan. That fan's slow speed is this fan's medium. I think medium is the best compromise between noise and air flow on this fan. The Hampton Bay's high speed was too high, it was like a hurricane. Nothing like that for this fan. It can move some air on high, but it is noisy. Slow speed is barely moving air, but quiet.The provided 23A 12 volt battery for the remote was dead. Fortunately, I had a spare. The remote is a bit flimsy, and the button designations do not stand out well.When the LED light bulbs are on, you can see a shadow of them in the lens. An LED module would make the light output consistent throughout the fixture.Overall, I would recommend this fan. I need 2 more, but the finish ring is needed for my installation, and all 3 fans would have to have them to make them look consistent in my home.TECH:Fan wires are about 36 inches long, plenty for most installations.The receiver RETAINS the last state when the power is turned off.Light and motor circuit are separate, and wired externally to the receiver.The receiver fits in the ceiling mount.The fan motor is one speed that is regulated by a circuit in the receiver. So you will not find the traditional speed selector on the body of the motor.LED screw-in bulbs (there are 2) are A15 size (slightly smaller than the standard home size A19). 3000K color temp and rated at 800 lumens.

I had an older fan that I liked the color and blade shape but the remote function failed. I could not find a replacement that would work with my old unit and the two different florescent lights and multi speed motor.After some shopping I found this one in a similar style as my old fan.Installation was easy and straight forward but as with any ceiling fan you will have to be able to handle the weight of the fan motor from a ladder. The process was fairly easy and I mounted the down rod then the fan motor went on the rod with a quick insertion of a pin. From there you add the blades and the trim housing.The remote works well and the fan has 3 speeds plus a lamp on/off function. There is a switch on the fan housing for reversing the direction. For me it is not a big deal since I only change directions twice each year.The fan is quiet and makes very little noise on low speed. Medium and high have some noise but this fan is as quiet as any I have ever used.I am very pleased and would consider the same fan for any other spot in my house that needed a replacement. The price seemed like a good value for the quality.Recommended.

I think this is a beautiful unit and pushes a lot of air. There are a few quirks that I'm able to speak about as I bought two different units and have them wired two different ways.Unit 1: wired directly to two wall switches (one for the fan and the other for the light). Light turns on immediately and the fan gets started right away. Drawback: unable to use the fan's multiple speed option on the fan because that is controlled solely by the remote, so without the remote you can only use the fan on high speed, which is not necessarily bad.Unit 2: Wired on one switch using the remote control unit (as designed). Fan speed can be controlled. The light can turn on a off. I haven't seen any dimming feature yet. Drawbacks: remote sucks and rarely controls the unit (I've only gotten it to work from one spot in the whole room.) When turning on the unit from the wall switch, it takes about 3 seconds for anything else to turn on, so if you don't wait after flipping the switch, you might think the unit is not working. Same with using the remote, it takes about 3 seconds before the fan or light responds.Overall: Good fan and light. Don't use the remote feature though as that is useless (in my opinion). You'll be capped at one speed, but that is not much of a downside.

I'm writing this just because I think at this price there is no better fan on amazon I bought some others on prime day that were smaller and another popular brand which I don't like and this has them beat. First I think this fan looks really good especially in white and white has the best price. Second it is silent as can be I have never heard a silent fan be totally silent the hum is so low you have to be in a totally silent room to hear it and part of why I bought this fan was to have a silent office and this is. Third wind is good for me, its equal to what I had before from another popular brand that is still sold now. I live in florida and its hot here my office gets hot so even with a fan I'm still hot. I have it in a 8x10 room and I think this size is a must in hot places why pay same price for a smaller fan. Fourth and to me a big plus lots of fans now come with led light plates that you will have to order from the manufacturer to replace I was so glad this took bulbs because smart lights look so cool and I needed a bulb fan.Also the picture about the mount not flush with the ceiling that person must of did something wrong because it's perfect on mine I don't even know how that could happen if you install it correctly.The only knocks I would give on this to prevent 5 stars the remote sometimes doesn't respond on first press that could be me not leaving the sensor out. Also I originally tried to the fan without the downrod to be closer to the ceiling the instructions are not super clear on how to do it but you will figure it out just take your time I didn't. But either way if you in a hot place don't do it might look cool but will create less wind not worth it.

I purchased this fan on Prime Day, getting it for around $50 under its regular price. Having installed it and use it for a couple of days, I would say I wouldn't think twice to pay regular price for this in the future. This fan is unique to other ceiling fans that I have installed (in the 20-30 range), where the blades slide into slots and are then secured with screws, versus mounting to a bracket, which is then mounted to the fan. This made this step extremely easy to install!The only issue I have, keeping me from giving this 5 stars, is the installation instructions not explaining clearly the wiring diagram. It calls for white to white, black to black, etc. The issue I have is that the receiver has a red wire and there is no mention of a red wire from it. The diagram shows white and black, with no mention of red. Fortunately, Google is my friend, and I was able to figure it out. I could only imagine how frustrating this would have been for someone who either doesn't understand electrical or without technical knowhow to think to look up the wiring diagram on the internet.All of that aside, once the fan was installed, I was blown (ha!) away at everything about the fan! The remote gives you more options than I expected, allowing you to set it on a timer, randomly vary the speed, and set it to "away" mode to turn the light on and off randomly. This was way more than I had expected it to have, which was a nice surprise!

The ceiling fan over my bed died, so I needed a new one. I purchased a nice brushed nickel fan, but it was a flush mount model, and it didn't push enough air down. I decided to put that fan in our dining room and looked for a pedestal fan. I saw this one, and the price was reasonable. I ordered it on a Saturday with the understanding that it would arrive on Tuesday, but informed on Monday afternoon that it wouldn't be here until the following Saturday. Alas, it arrived on Friday.My 21 year old son works as an electrician, and he said installing this fan was a piece of cake (he took down the first replacement fan, installed this one, and then took down the old fan in the dining room and replaced it, too. All in about 1 hour).This fan: It is really, really quiet. It has a subdued, utilitarian look, and it pushes a lot of air. The remote is easy to use. Neat feature: I didn't know that it had a "home protection" feature when I bought it. When you activate it, it will randomly turn the light on for anywhere from 5 minutes to 60 minutes at random times throughout the day while you are away at work or vacation. It has a light delay feature that will turn the light off after one minute, giving you time to leave the room. It has a breeze feature, where it will randomly increase and decrease fan speed to simulate wind (probably not something I'll use).All in all, this is a great fan.

We love everything about tour white, Prominence Home, Ashby Ceiling Fan! Rated the installation only 4 stars because we had it professionally installed so we really don't know. The installer didn't complain so we presume it was, at least, relatively easy to install. In addition to loving the remote and noise level, the appearance of the fan and its movement of air are both excellent. The low setting is wonderful for sleeping. And, unlike several customers, our remote's battery was A-okay and, as some others have indicated, the light IS fully dimmable. Just hold the light button on the remote and it will cycle from bright to dim light. It takes a few seconds for this process to begin so don't give up too quickly.

The fan is fine. The light is fine. The remote is flimsy and comes apart and is a bear to put back together. I would not buy this combination again.

Cumple

Un excelente producto, silencioso, abundante aire y a muy buen precio.

Esta bonito y es silencioso, NO funcionaba la bateria, compre otra y quedo muy bien.

This fan looks great! I like the various lighting settings and the different levels of fan it offers. I found it cheaper at Home Depot than Amazon though so definitely take some time to price check

Velocida muy silencioso y perfecta