EVO-STIK Impact Contact Adhesive, Non- Solvent Multipurpose, High-Strength Adhesive, Bonds Instantly on Contact, Fast Drying, 250ml Tin

Product wure für modellbau verwendet,sehr gutes Product

BEST STRONG GLUE I'VE FOUND. Miles better than superglue or gorilla glue as it dries to strong enough to manhandle the object after 1-2 minutes, then one to two days for a full cure. Gives some working time but the adhesion happens very quickly so you do have to make sure to align it correctly the first go around. Important things I learned: - Use it outside and WEAR A RESPIRATOR MASK. The fumes are STRONG. - Get a couple of cheap paint brushes to apply it. They will become sticks with a blob of glue for an end so be prepared to go through a brush or two if you really care about clean seams. - You need to apply a layer of glue to the two different objects you are gluing together on the surface where they will adhere, wait a minute or two for the glue to become touch dry THEN push the two surfaces together. It works much better and leaves a cleaner seam (leaving very little to no glue squidges from pushing the surfaces together). - The tin size is good but you may want to get a smaller tin if only using it for small projects because once opened, the glue starts to get thicker over time (over about 2 weeks) until it cures solid to the base of the tin. - I would recommend using single-use nitrile or latex gloves, double gloved (i.e. two gloves on each hand) instead of marigold gloves as that ended with my nice kitchen gloves getting stuck to each other and, even though they only touched for a second, ripping when I pulled them apart. Double gloved because you can remove if/when they get glue on them and easily re-glove without having to be super careful of not touching the glue. Even so, super worth the money (inc. for extra paintbrushes, box of gloves and the respirator mask). I used it for gluing EVA foam together for a cosplay and it held up amazingly! We also used it when a suction cup base for the netting in the garden wouldn't stay in place when it got windy and it hasn't unadhered since!! And that's between slate and a heavy duty suction cup through quite a few wind storms! I would highly recommend using this glue, especially when you need a glue that doesn't become brittle but stays a bit flexible when dry while still being extremely strong.

Malgré le délai et le manque de notice en français, le produit est de qualité.

order this for my warder to replace the felt on the bottom off my boots works great but make sure you clean the boot really good before applying!

Buon prodotto , usato per un armatura cospley e una cintura in sky...ottima tenuta. Soddisfatta...peccato per la consegna che non è in 24 ore.