BANLTRE 12 Sheets 7.5 mil Mylar Sheet 12 x 12 inch Milky Translucent PET Blank Stencil Making Sheet for Cutting Machines, Cut Tool Template Material (7.5 mil)

A++++

I got the 75mm to make face paint stencils on my Cricut. At first I had a lot of frustrations as the fine point blade would not cut through it despite trying a million different settings- you have to use the deep cut blade and change a few custom settings - (choose Mylar, then max out the pressure). After doing this it cut perfectly and worked so well!!! I was able to make custom logo stencils for the MN wind chill event.

TL:DR I used this to replace the plastic part in the Xbox elite 2 controller's bumper. 3 months later it works great!!! Anyone who knows, knows the Elite 2 series sadly has the same problem of the left and right bumper/s not working over time. Over the process of elimination. Husband and I discovered (at least in his case) it was because the stupid little plastic piece between the bumper button and plastic tip pressing ito it, wore down/got intents. So I started to look up to see if they solid just those plastic pieces, NOPE. My only options were to Buy the paddles so he can customize one of them to act as a pseudo bumper button, for $10 or up (price varies if you get official or non official). Buy the whole replacement part for $16. Or buy a complete new controller which will have the same problems again, $60-100... Eventually I realised I could just find sheets of thin plastic. Found these stencils, convinced husband we should get cuz it will work, and I was right! It's been 3 months now with NO problems whatsoever. The original plastic piece was 5.5mm, I got the 7.5mm. Just so had just a bit more of a chance not to indent as soon. These sheets will last me the rest of the lifespan of this controller.

I bought this 7.5 mylar to make a camo stencil with a cricut. After 3 tries I was successfully at custom setting Natural Wood veener, with deep cut blade. I had to run it twice, do not eject after first 4x setting cut for Natural Wood Veneer custom setting. Hope this helps.

K

I started doing Diamond art. I wanted to mount the canvas on something and have it be backlit in my frame. This is the perfect thickness for this purpose.

As Described

I bought this to replace the cracked mylar in some solar garden decorations. The 10 mil weight was good. I knew the length wasn't long enough and I was able to glue pieces together with E6000 glue. It doesn't show. The original was squared at the corners, but I just left the corners rounded and it worked fine. I would buy this again. It extended the life of my decorations.

I can only speak to using these mylar sheets to cut stencils by hand with a scalpel. They worked well. 7.5 mil seems to be the right weight to minimize the number of passes required to cut through the plastic while maintaining enough strength to stand up to regular use. I was worried that the high-gloss finish would cause the scalpel to slip, but this didn't prove to be the the case. The product is competitively priced. I would buy these again.

It is hard plastic sheet and not transparent too. If you are going to buy it to cut stencil by your self with stencil knife. Please don't go for it. Very difficult to cut stencils in this sheet by hand. May be by it is good for laser machine.

As described.

I like to make my own multi-layer stencils to create complex patterns and images. These sheets worked very well to make very clean detailed stencils with my Cricut Maker and Cricut Maker 4 machines. A sticky mat is essential. After some experimentation I found that 350 cut pressure, 3 passes and the fine point blade produced the best consistent results with my machines. However machine performance can vary, so depending on the condition of your machine and blade, you may need up to 5x to 7x passes as others have suggested. I didn't bother to try the deep cut blade as I was able to get great results with the fine point blade.

It is difficult to use 10 mil for cutting stencil in cameo 4. It needs many passes to cut completely, around 10 passes.