DIRECTIONS: After dust mopping (or vacuuming) the floor, damp mop it (or machine-scrub it) with a solution of water with our MB-1 Marble, Granite & More Floor Cleaner using the correct mixing proportions (as indicated on the back-label of the product). Once the floor is dry, spray a mist of MB-10 over an area of approximately 50 square feet (4-5 m2) and buff it while still wet using a high-speed burnishing floor machine (1500 RPM rec.) with a proper polishing pad (natural hog-hair pads are recommended, though not necessary). Repeat until the whole floor has been restored. This procedure should be implemented on a daily frequency basis in the most traffic-intense areas, such as doorways, front-desk counters, elevators doors, etc. (make reference to the DIRECTIONS printed on the back label of our MB-8). The final result should be a perfectly shiny and uniform surface, with no "orange-peel" effect or burnishing marks. If swirl-marks are detectable, spray some additional MB-10 over the affected area and burnish immediately while still wet.
Trustpilot
1 week ago
3 weeks ago
