MOOG K90677 Stabilizer Bar Link

Perfect OEM fit, very durable, cost less than half what a factory Toyota swaybar link costs, and it works great with my 3 inch suspension lift (full package with shocks, springs, UCA’s, adjustable rear sway bar links, and adjustable rear trac bar from Iron Man 4x4 America. I replaced the front swaybar bushings with Moog parts as well. I replaced both sides on my 2008 Toyota 4runner limited V8 4 x 4 in action in the video. Solid & quiet, but just like the oems, these have no grease zerts on them, just like most parts sold today.

perfect

Fits my 07 FJ fine. Definitely noticed a difference after replacing the old ones (140,000 miles). These also are a far better design than the original part because you can use a wrench to hold the back side while tightening or loosening the nut. The original ones have a hex slot inside of the threaded shaft which will either break or strip if you haven't had them off recently. I had to cut the nut off of my originals and replace them for this reason while replacing my struts.

Was delivered Nov 28th 2018. Package was in good shape, the part made an impression of a fairly well made product. Has replaced the original link in 2007 4runner in December 2018. Fast forward to April 2019 (less then 3000 km of driving) - complete fail - the joint is very loose and doesn't function as designed at all, which makes sway bar wobling and producing noise. The warranty request has been submitted, will update the review depending on the manufacture response.

Replaced my 4Runner’s old sway bar link with the MOOG K90677, and it fits perfectly and feels rock-solid. Installation was straightforward, and the ride is noticeably smoother — no more clunks over bumps or rough roads. Quality feels OEM-level but more durable, and the hardware is built to last. If you’re replacing worn links or just want a reliable suspension upgrade, this MOOG part is a no-brainer.