Hon&Guan 8'' Soffit Exhaust Vent, 8 Inch Round Wall Vent Cover for Bathroom Office Home (ø200mm)

ممتازة مع مرتبة الشرف

Yes, this is a solid lil vent. Good quality. Great design. Only thing to be careful of is the air flow and possibly restricting of the lil holes. They will easily clog depending on what it is used for to exhaust. Overall good vent. Just was too restrictive for what I intended it for.

The screen on the inside seriously restricts the air flow. If you buy one make sure you remove that.

Perfect for ac extension out window 😊

It’s maybe 4.5 star, but almost perfect. The only thing that was a minus? The ability to separate the parts (cover from sleeve was quite a challenge.

Most people don't know this as the directions and description does not say this. The 3 black wings on the outside are meant to keep tension and keep the vent pipe secured to the round hole you cut, however some people might have a wall that is thicker than the space between the cover and the wings (such as exterior walls with siding and sheathing). If that's the case, the wings can easily be snapped off because they won't serve much of a purpose with a thick wall. Simply pull the wings off. They snap off easily. Also, you can easily pry off the white face/cover with a flathead screwdriver..you will need to anyway in order to screw the tube to your wall with the supplied screw holes on the front of the flange. You can replace the white cap afterwards. which will hide the screws. You can use glue or adhesive too if you wish in addition to the screws, and to glue the white flange cap in permanently. You don't need to glue it though as there is enough tension between the cap and the pipe. "Glued and screwed" is always better than glued OR screwed alone, as any good carpenter knows.