OnePlus 3T/OnePlus 3 Case, TUDIA Full-Matte Lightweight [ARCH] TPU Bumper Shock Absorption Case for OnePlus 3T, OnePlus 3 (Frosted Clear)

A great case, however, be careful as its fit is pretty snug. That means any screen protector that covers the curved edge of the screen will get pushed up by it unless its alignment is 100% perfect, and even then, there's still some wiggle room that causes the case to push the protector up. In my case, for both Pleson tempered glass and plastic screen protectors, it did not work well. The tempered glass was pushed up and eventually broke as I kept trying to pop it in. The plastic stick-on protector is constantly being pushed up causing bubbles to form. It's really frustrating, but the case itself works very well.

Update: After about 6 months the color has faded significantly. The blue has turned a grayish-green around the edges. I'm going to try switching to something new.-----------------------Great fit, not too "sticky" sliding in your pocket like some rubber cases, the texture has a better grip than some of the other OnePlus3 cases I have felt and adds grip compared to the metal back of the phone. I ordered the Blue, but the picture is not true to color. The actual case is a little darker and more blue-gray. I like that it is just thick enough that it protects the camera from touching anything while laying down and the screen is protected when you lay it face down.

I was looking for a simple no frills case for my oneplus 3 and this was perfect. the front face lip protects the front glass unlike many other oneplus 3 cases. it also doesn't add too much bulk. the black is matte and slightly slippery but better than the slippery bare metal body. cutouts are well positioned and buttons all work. charger fits perfectly with case on. the little text on the back is barely noticeable and i usually hate, hate, hate case branding. would buy again.

The case is of great quality. That alone should have gotten it a 5* review. But it got only 3* from me because this case doesn't work well with glass screen protectors. If your phone have a GS protectors and you want to install this case then it'll probably look like it's a perfect match. But when you put your phone in the pocket and after a few hours, you'll notice the screen protector isn't touching the screen in some places. This will happen each time you fix the GS protector, it's only matter of hours.

This is a great case for its value. It's very light and thin, but thick enough to cover the camera bump. The case has a matte finish which gives it a nice grip. It's a tight fit on the phone which ensures that the case won't fall off. The reason why I didn't give it 5 stars is because of the tedious hunt for a screen protector that would fit this case. I had to return my Orzly glass screen protector for a plastic one, which isn't too bad. However, even my plastic screen protector didn't fit. I solved this issue by simply cutting the edges. If you are considering buying this case, I highly suggest looking for a plastic screen protector that doesn't cover the entire screen.

I bought a black and white case (frosted clear) and both fit nicely and feel good. The reason I didn't give it a five star because I personally didn't like seeing most of the side buttons getting covered by the case. I want to see those sexy silver buttons. I get it though, it's best for protection. Besides that I think it's a great case, one of my also favorite semi-full protection cases. Is not my daily but I switch between this one and my vintage cover case sometimes.

1 TPU2 Matte finish looks nice and is not slippery like most other TPU cases. greasy finger prints after cooking wipe right off.3 sufficiently raised above the camera bump but the phone still feel very slim compared to my lg g3 which doesn't wear a case.*note: that in the picture there is a stylish line across the back of the phone (under the Tudia emboss) that looks silvery. It is actually gloss black and is much more subtle that in the pictures.

Perfect bumper (with back) case, fits snuggly on the OnePlus3 and has saved my screen repeatedly from braking.The lip of the case comes up around the front of the phone just enough to save from flat faced or even sideways falls.Good grip and feel, and buttons work fine with case on.

I ordered this cover for my new Oneplus 3 on the basis of previous reviews for the TUDIA case for other models. I had to wait a little longer than normal for delivery as the case wasn't actually released when I ordered it but notwithstanding that it arrived (from the USA I believe) within a week of it's release date. The actual case is well made and has a premium feel to it, fits well and the cutouts/covers for camera/buttons/speaker etc are all in the correct place. In short a well made high quality cover - you just have to decide what colour you want!

Seems to offer good protections to the back and sides of the phone. Definitely retains the slim feel of the phone however as the camera juts out on the phone there is only around 0.25 mm between the case and top of the camera, I'd prefer a little more protection here.You'll notice in the photo that the case appears to have a different texture below and above the line on the back of the case. The material and texture is in fact the same all over the case, resembling the lower texture more closely. Not much grip on the case making it prone to sliding out your hands if not careful.The main area that let the case down for me was the bottom where the plastic has been cut to make way for the headphone jack and usb port. Corners here have not been smoothed down, creating a rough and jagged feel. I would normally use my pinky finger to support the base of the phone while texting but the case cuts into my finger and so I've had to change the way I hold the phone.Overall an okay case with a slim feel but there are more practical options out there.

Overall, the case is good. Not great, good. The phone is a sturdy build regardless, however the case adds more protection with a semi thick layer of material to defend from drops and marks. My only gripe is that the case cover is still (like the phone without any cover on), slippery.It's still easy for the phone to slip out of your hand, however not as fully slippery as it was without any case at all.It's a good case for it's money compared to some tacky ones i've seen around and at the end of the day I recommend it. For future designs, make them a bit more "grippy".

A great blue colour case for my OnePlus 3 Phone. Sits tightly round the phone and provides enough protection all roun the phone including the phone bump.The buttons feel really responsive on both sides (volume, and power buttons)The usb charging port is really easy to access and has great cuttings all round.

This is a pretty standard flexible, tpu, case. It fits well, there is easy access to all ports. It's nice and plain, apart from some branding on the back, and a detail line, on the back, which imo, looks ok.I imagine this case would be effective (with TGPS) at saving the phone from small drops.It looks quite stylish, but does, pretty much, conceal the phone.