VideoSecu 4 Black Universal Satellite Speaker Mounts/Brackets for Walls and Ceilings 1VE (Black, 4 Pack)

I used these to install smaller speakers in a Sony surround sound set up. These mounts were perfect, I trust the lighter weight speakers on them, no problem. The different pieces were removable and adjustable, giving alot of options for distance from wall, mounting options, etc. They were a little hard to tighten once the speakers were in place (the hex key is tough to work in corners, behind speakers), but this can be solved by adjusting before attaching the speakers. These were the best priced mounts that I could find and I am satisfied with this purchase.

I was very impressed with these mounts. They aren't cheap plastic, but a solid nylon based plastic, much more sturdy. Lots of mounting options, extensions, and mounts. Would imagine they could mount to 90%+ of the different types of speakers our there. I used these to mount my Rear Back Surround speakers which actually mount behind the couch to the wall pointing directly up. No problems, there were quickly adjusted and mounted. All hardware included for all the different mounting options.

Great product but beware you can easily over tighten these and strip the main screw that holds speaker onto the mount. Used to mount atmos speakers to ceiling.

These mounts were exactly what I needed. They are made of a heavy-duty nylon type plastic. They have multiple parts that easily come apart and put back together with hex screws, so that they can be used with or without the extenders or elbows. They also, with several screws of different types and length so that there are many ways to mount things. They are actually labeled in the packaging has mounts for security cameras, but they worked great for my speakers. I did have to grind down the part that attach to the speaker to fit it inside of the speakers' mounting box, but this was more a problem with the design of my speakers, and was fairly simple to do. Each mount comes with a hex wrench, so you get some bonus hex wrenches out of the deal.

These mounts are glass-embedded injection-molded plastic. If this doesn't mean anything to you, look it up. In a word, it means "sturdy" and unlike lesser plastic products the result is this material is very rigid. It's more difficult to manufacture but for this application it's very much worth it. At this price, it's also a good deal. I used this set to mount the speakers that come with the MartinLogan MLT-2 Home Theater System. The mounts are performing well and the speaker hasn't slipped from it's original position. I appreciated the extra hardware that was included and instead of one Allen wrench for the set, there's one per mount. Convenient if you're on a ladder and only have the parts bag with you. These are a good deal for what I expected of them and will be looking to them again should I need more in the future. Update Dec 2, 2015 One of the mounts is failing to hold a speaker at the angle in which I originally positioned it. I believe any other of these mounts would perform the same. The speaker in question is 3.8 lbs and was mounted horizontally and the arm bent ~45 degrees on the horizontal plane. This introduces torque to the arm and it rotated down ~90 degrees over time. Four lbs is a lot to ask of these mounts so I'm probably pushing it but that's my experience. If I had a place to mount my speakers and hang them without trying to support the weight off the wall they'd be just fine.

Background: I bought these for my home surround setup. I used Energy 5.1 speakers (these are on the smaller side). Pros: Works great. Wiring and speaker installation was simple. There is a hole to run wire in which is great to hide the wires. Holds position that I set it in. Had these a few years and are holding up great. Also great price. Cons: None Bottom line: If you need mount for a smaller sized speaker, this is the ticket.

Here is a link to a guy who describes how to use and how they work. It is one of the best videos that I have seen on You Tube. [...] There have been people who say that they move around alot. One person said that it keep dropping down. Well I have found that if you tighten the screws tight enough they say in place. The directions that come with these are ok. But if you are some what smart you can figure it out. They come with all the screws and tools that you need to put them up. I have mine hung up on my wall with Insignia speakers and they are holding them fine. If you are looking for some good wall mounts that don't cost an arm and an leg then these will work out great for you. Like I said watch the video with the link that I have adjust he really helps out alot on how they work and what you need to do.

Great set of mounts for the price. Extremely sturdy, came with many mounting options, sleek. Actually I had a trip with this one. First of all I don't have speakers with a standard wall mount setup. I drilled some holes in the back of them and used the single-hole mounting bracket that came with this set. No real issues here, did a pretty good job (if I may say so myself). My only gripe about these is the wall anchors that came with them kind of... suck. They have no grip on the drywall that I set it in and always fell through to the nether regions of my home. I had to buy some decent ones from Home Depot to alleviate this. After all, they'll be stuck in the wall for good, so why not use good quality drywall anchors? Not enough to warrant -1 star though. Great item, fast delivery, great seller. A++.

Fits the energy classic well!!!

Original product

I am satisfied with this product. I don't know why others (based on the reviews that I read before buying) found it hard to install. I did the installation myself without any assistance, and my speakers weighed almost 10ibs. Had I known I would have bought the 6pcs set.

I was afraid that my choice will not serve the purpose, however, I was astonished at how nicely adjusted my BOSE Gem speakers and fits them perfectly for a ceiling mount in my basement.