QualGear PRB-717-Wht Ceiling Mount Projector Accessory

The media could not be loaded. I needed to install a projector onto a drop ceiling in my basement. I looked at multiple mounting systems and they were expensive, had plastic parts or just wouldn’t work with my needs. This QualGear unit looked good and I knew I could make it work so I went ahead and purchased it.I liked that the unit had some features that I appreciated:• It came with a lot of hardware so I would not have to go to the hardware store to purchase additional screws, nuts, bolts and other items. It even included spare extension arms to fit multiple projector designs. It includes spaces and washers and even large mounting screws for the mounting plate. I show these items in my video.• It is designed to be a universal mount and sure enough it worked perfectly with my projector. It is a BenQ HT3050.• The mounting unit is made of steel and it is ruggedly designed• It comes in white so it matched my ceiling and it matched my projector• It has four ways to adjust the mounting angles for the projector to make sure that it is aligned the way you need it to be.• I loved that it had a drilling templet in the box and I used it to design and build a mounting system that extended down from the basement ceiling joists to the level of the drop ceiling.• The mounting bracket is fairly priced, especially if you consider its quality and all of the supplied hardware that is supplied.Overall I am very pleased with the unit as it worked perfectly and the installation is solid. I put together a detailed video to show how the unit assembles and mounts to my projector. I also show how finding the projector’s center of gravity is important. My video shows the final installation and I think it looks very good.I rated this mount at 5 stars and I would purchase it again. I hope my video is helpful for you. It has been almost 2 years and i have had not problems with this mount. It is solid and it works well, just make sure you install it properly.We have used this mount every day since we installed it and it is as solid as the day we installed it.I am happy that I purchased it and the installation worked out perfectly. This unit provides solid mounting and allows easy adjustment of the aiming setup.This unit is well designed and flexible enough to fit multiple projectors.

I recently received the BenQ HT1075 projector and needed to mount it on my ceiling. My challenge was I have a heating duct that runs along the ceiling exactly in front of where I needed the projector mounted, so I needed a mount that was about 6 1/2" from the ceiling to the projector to allow the projector to shine underneath the duct. This mount fit the bill exactly. Not only that, but it was a piece of cake to install (took about 30 minutes from unpackaging to mounted on the ceiling).The attachment legs are very versatile. My projector uses a 3 screw hole mounting scheme and it's an oblong triangle. But this mount comes with several different size legs and they are all customizable to just about any position. The kit also comes with an alan wrench for the legs as well as all the pitch/yaw/roll/tilt adjustments. And speaking of that, this mount is 100% customizable to wherever you need your projector to shine! My projector is actually offset from the screen because it's the only ceiling beam I could find to attach it to. But that's OK because this mount allows me to angle and rotate the projector exactly where I need it to shine. Very easy to use.Once mounted, it's solid as a rock. You first mount the top portion to your ceiling using the 2 1/2 hex bolts, or it also comes with concrete anchors and additional bolts for concrete attachment. Then you attach the bottom portion to the bottom of your projector. It comes with several spacers, screws for different size projector mounting holes, and leg extensions. After that, just fit the two together, position and tighten and you're good to go. Instructions are easy to follow, but I recommend watching the short video they have on Amazon as it will give you an overall idea of the assembly process.I spent several hours going through all the various ceiling mounts available on Amazon. Glad I came across, and decided to try this one. It's perfect for what I needed and the price was right too.