SiliconDust HDHomeRun Flex 4K ATSC 3.0 NextGen TV: 2/4 Tuners HDFX-4K

This is a quality product for tuning in & recording OTA TV. Paired with a Winegard Elite 7550 Outdoor HDTV Antenna & 2TB external hard drive I purchased separately, I was able to pull in 78 clear channels 37 miles from my local antenna farm. Five ATSC 3.0 channels scanned in, but only 3 ATSC 3.0 actually displayed pictures and sounds; none were broadcasting in 4K so far. I purchased the $35 channel guide & DVR recording capabilities (the whole point of buying this product) separately from SiliconDust online. Here is a rough cost breakdown for my setup: SiliconDust HDHomeRun Flex 4K $200, Winegard Elite 7550 Outdoor HDTV Antenna $150, 2 TB external hard drive; $70, SiliconDust DVR/Channel Guide 1-year service $35, two Onn TV Android boxes $40, 30-foot telescope mounting pole/hardware/coaxial cable/professional installation $460 equals $955 total, a lot of money, but a professional clean weatherproof performance ensemble. Cable TV with DVR (w/o internet) in my area is about $145 a month with NO premium channels, so ostensibly my breakeven is at 7.5 months. I did not want to further complicate my life with a Plex server and/or Channels guide, nor the associated extra costs and complexity, which is not necessary since the SiliconDust UI is top-notch/excellent. ONE CAVEAT: If your TV or streaming device is running Roku software (like mine & millions of others)—my SiliconDust HDHomeRun app was prone to crashing frequently, and the FF/rewind did NOT work AT ALL. I solved this problem by buying/installing two $20 Onn TV Android boxes from Walmart and using the free SiliconDust HDHomeRun Android app from the Google Play Store. Now FF/Rewind works as it should, and the HDHomeRun Android app does not crash. Some internet searching will reveal this is a common SiliconDust HDHomeRun/Roku problem/issue that SiliconDust has been unsuccessfully working on debugging for a long time. It should have been resolved by SiliconDust and/or Roku long ago, and I should NOT have had to figure out this workaround on my own. Still, this is a solid OTA tuner w/DVR capabilities with superb channel tuning and UI that I will give it 5 stars despite my Roku caveat. 6 MONTH UPDATE: SiliconDust HDHomeRun Flex 4K is still a solid choice. I have really warmed up to the excellent UI. The FF/rewind is still working on my Onn TV Android box. I must report the SiliconDust HDHomeRun Onn TV Android app does not load easily, or as it should, like all my other apps. Restarting the Onn TV box is typically necessary, usually 2 times, to bring up the SiliconDust HDHomeRun UI. I am not sure if this is a SiliconDust HDHomeRun Android app issue, a Google bloatware issue, or both. I have yet to try an alternate launcher, which I have some reservations about. SiliconDust has still not fixed the aforementioned Roku app problem. A SiliconDust sad state of affairs. Customers should not have to figure out a Roku workaround. I have given serious thought to trying the newest Tablo (despite having so many problems with an old Tablo Quad, Tablo’s poor customer support, & no hardware repairs offered), or "rounding up" 2 older used model TiVo’s that work with an antenna. Why the latter? I have owned a Tablo Quad, a Silicon Dust HDHomeRun, and 2 TiVo (very old) Premiers—all fed by antennas. TiVo (the most expensive option that works best with a box for each TV) has the best UI, works flawlessly, responds the best by far instantly, and has a one-button auto commercial skip that actually works. 12 MONTH UPDATE: I have now surpassed my breakeven point. I’m in the black with my SiliconDust HDHomeRun/antenna setup vs. cable TV cost by a wide margin. Admittedly, there is some loss with OTA programming vs. cable, but not by $0 vs. $145 a month margin. Not to mention, if I really want to see a program, I can easily find it and stream it. With the last SiliconDust firmware/app update, I have found that the previously discussed SiliconDust HDHomeRun app loading issues do not occur if the app is returned to the Live TV mode before exiting and not left in DVR mode. I have given up on the idea of “rounding up” a used older TiVo since my SiliconDust HDHomeRun is performing better after the latest firmware/app update. You’d also need a TiVo for each TV, and TiVo has really abandoned the OTA DVR business altogether. I recommend SiliconDust HDHomeRun and hold out hope that SiliconDust fixes the Roku app soon to accommodate the FF/Rewind function.

This is kind of lengthy... Previously, for the past 6 years, our household used a “Tablo” as our in-home OTA DVR solution. For that purpose, it worked fairly well. I won’t go into any of the downsides, but the final deal killer was the inability to access it remotely using Roku devices. No matter how many router tweaks and settings such as port forwarding I tried, Roku just couldn’t access it. The only thing that worked was using a smartphone. All we wanted was the ability to access our local news broadcasts and sporting events when out of town. We thought we had found a solution by subscribing to “YouTube TV” which provides local channels as part of the package. Imagine our disappointment when on our first trip out of town, we could not get any of our hometown stations but instead those of where we were at the time. Upon our return, I resolved to finally replace the “Tablo” with a SiliconDust “HDHomeRun Flex 4K”. Operationally, much like the “Tablo”, you connect an OTA antenna to the unit, connect to your home network and then power it up. One of the nice things about the “Tablo” is that you can connect to your home network wirelessly. The “HDHomeRun” requires a wired ethernet connection. This meant we would have to run ethernet cable from our router to where the unit would reside. Fortunately for us this was something we did last year for different reasons but in the process, the “Tablo” was connected directly as well which greatly improved its responsiveness and stability. Unboxing the “HDHomeRun” and connecting it in place of the “Tablo” took only a few minutes. I used the “HDHomeRun” app on my android phone while connected to the same network to finish up firmware upgrades and channel scans. The “HDHomeRun”, when connected to our attic antenna, picked up 52 local ATSC 1.0 channels and 4 ATSC 3.0 stations. Now, the main reason we selected the “HDHomeRun” was its ability to integrate with our “Plex Media Server” which we have had operating for years. Within just minutes, the “HDHomeRun” was setup within Plex which, as part of our lifetime pass, provides a guide for all of the channels the “HDHomeRun” found. Plex also provides native DVR support so no additional storage devices or fees to SiliconDust for their DVR functionality. What Plex won’t do is decode AC-4 audio (blame FFmpeg) which is what the ATSC 3.0 broadcasts come with. Not a huge problem since all of the ATSC 1.0 audio channels work just fine. We anticipate that Plex/FFmpeg will provide the AC-4 decoder eventually as ATSC 3.0 adoption picks up, but the main thing is, since Plex is a server, we can access it remotely which means all of our local channels are available remotely as well. “HDHomeRun” also has a Windows 10 app which was downloaded to test. That worked great and after downloading a couple of drivers it said it needed, including a 99 cent one from Microsoft, I was able to play the ATSC 3.0 channels with audio as well. Some users have complained about channel changes taking a long time. For us this is 2-3 seconds. I challenge anyone to go from one YouTube or Roku channel to another much faster. All in all, to date, this change over has worked out well. It picks up all of the local free channels we could ever need. Subjectively, we also think the image quality is great. If I had a wish list, it would be that the “HDHomeRun” apps provided more native info and/or metadata about each channel such as the kind of audio track being listened to and the video resolution. Kind of like YouTube providing “Stats for Nerds” on each of its videos. We’re not sure if we are future proofed on the ATSC 3.0 roll-out but that was not the only or even main part of the reason for our purchase decision. What we wanted is what we got, and it works very, very well.

I purchased theSiliconDust HDHomeRun Flex 4K ATSC 3.0 to replace two HDHomeRun Connect Duos. My Connect Duos still performed but I decided to purchase a 4 tuner model to free up an internet outlet. Performance: The tuner pulled in available channels for my area. I used it with a roof antenna at a house and with some indoor antennas at an apartment. The indoor antennas drive me crazy because they are so sensitive but my HDHomeRun tuners still pick up whatever they bring in. Channels look the same from HDHomeRun as they do with the native Samsung tuner. I love the updated guide design in Live view. DVR Service: I began using the HDHomeRun Connects years ago with Windows Media Center on a Windows PC as my DVR (miss you WMC). I purchased one Duo then later purchased another one a year or 2 later. Once WMC was retired, I switched to the HDHomeRun DVR service for $35 per year. With the service, we are basically paying for the guide data, not the DVR service. It works okay and I like that it now shows upcoming tasks. I also have a Plex media server on my pc. I tried the Plex DVR but quality was inconsistent. I only have to go into the DVR part to schedule on demand recordings. I like that it allows you to schedule single episodes and the guide even includes the Season and episode number in the Discover section when you select airings to record if you do not want the whole season. How I Watch: I still have an antenna connection to my main living room Samsung TV so I watch Live TV from their native tuner. I use the HDHomeRun app or the Channels app to watch live on my AppleTV in my bedroom. The rest of my TVs use either the HDHomeRun app or the Plex app to watch Live TV. This has been working for me. I also tried Kodi as my front end and it did work okay finding the HDHomeRun tuners but I since moved to Plex for my media server. Replacement heads up: I disconnected one Connect Duo then connected the Flex 4K and set it up. I confirmed my channels and DVR was still good. Next, I disconnected the 2nd Connect Duo. At that point, my schedule DVR tasks disappeared and I had to set them back up again. Some of my shows do not have airings right now so I will need to wait to set them back up. I noticed it did not record its tasks the first two nights. When I troubleshooted, I found the app no longer showed me as an active DVR subscriber. You must go the the Account Details and log back into to your account and add your DVR activation key. I wish that was clear somewhere! Upcoming Tasks: I like this window is available on the Tasks tab to see your upcoming scheduled recordings. I don't know how new that is or if I missed it all these years. This will help me manage my computer's CPU resources with a resource intensive program I run on the same PC I run my HDHomeRun DVR software on. I can pause the other program if needed while recordings are in process. ATSC 3.0: I am okay with this feature not working yet. This is not SiliconDust's fault and I personally have signed several petitions to keep broadcast tv free and available and with ATSC 3.0 available for all since the airways belong to the public. Though I don't use it, I like these newer models have the ability to just connect a hard drive to it to record without a computer. It is a shame our TVs have this capability but it is not available in the US. Overall, I recommend HDHomeRun devices and I am glad they allowed me to easily cut the cord years ago. I conducted a 2 month review prior to cutting the cord and found most of the tv shows I watch are on the major broadcast networks and I like I did not need a device for every tv as some other tuner companies required back then. If you are struggling with the DVR aspect of it, perhaps try a different front end like Channels but it costs a bit more.

Amazing product for World Cup matches! Smooth and crystal clear. I am really surprised by this product! It is not complicated to set up at all. The absolute key for the setup is that if you have different networks at home (like a mix of Wi-Fi and ethernet with different SSIDs), just make sure to set up the device on the same network you are using. Once that's done, it works perfectly across my computer, iPad, and Fire TV Cube. No glitches, no issues, and zero lag. My internet speed is just 300 Mbps, and there are absolutely no frozen screens. I tested it thoroughly for this World Cup, and it works excellently to watch the Telemundo World Cup matches OTA (Over-The-Air). Highly recommended!

Update: I've been so frustrated with the constant freezing. I basically never watch antenna TV anymore because of it and customer support's usual answer along the lines of "it could be worse." In fact, I forgtt all about even having it until I saw the auto payment for another year of the dvr service. I saw it to late to cancel, but I don't renew next year, for certain. I don't even use it anymore until Sundays when I'm trying to watch football on my local station. I miss so many plays because of the freezing and having to restart (and missing every play that happened during that process), but that's not the only problem with live tv. Pausing hardly ever works, and more often than not, when I unpause, it skips right to live and I'm unable to rewind. When I watch something I've recorded, maybe the whole episode will be there... but maybe it crashes. In any case, if i try to pause, it restarts at the beginning. At one point, I blamed the Roku HDHomeRun app, but I later downloaded the app on an Amazon Fire TV, and wouldn't you know it, I have the same problems. I absolutely cannot recommend this product, which makes me sad bc it had a lot of promise, and I paid good money for it. Original review: The only reason I need a tuner/dvr at all is so I can record NFL games—I don't want to miss one while I'm watching another that's being broadcast at the same time, and I want to be able to skip commercials (and sometimes the announcers' chatter). I've tried several OTA receivers/DVRs but finally settled on the SiliconDust HDHomeRun Flex 4K. The SiliconDust HDHomeRun Flex 4K is dead simple to set up: plug in coax cable from the antenna, plug included ethernet cable into the HDHomeRun and your router, plug included power supply in. The HDHomeRun isn't connected to your television, only to your router (and antenna and power)—it streams your OTA channels to your TVs and other devices via app. Viewing OTA (antenna) TV: My two main TVs are Roku Tvs (and a rarely-used 3rd TV uses a Roku device), so I just added the HDHomeRun app. I didn't need to do anything else to view all my OTA channels, not even run a channel scan. I spent a total of about 2 minutes from opening the box to watching TV (and probably 60 seconds of that was bc my arthritic hands had trouble tightening the coax cable). I wasn't missing any of the 77 channels my TV found when the antenna cable was connected directly to the TV. (Incidentally, HDHomerun was not my first choice: I bought a Tablo Dual Lite first, but it could not find as many channels, and not the local networks that broadcast NFL games at all, so I returned it asap.) The picture through the HDHomeRun is clearer than watching when watching from my Dish, which surprised me. Note: Some Samsung TVs cannot get audio when using the HDHomeRun. The site's FAQ says "To hear audio, you need a TV, AV receiver, or soundbar that can decode Dolby Digital or AC3 audio over HDMI. Most modern TVs can do this, though we’ve noticed a few Samsung TVs cannot." DVR: If you want DVR functionality, you'll pay $35/year, and plug in an external hard drive to your HDHomeRun via usb. I tested the DVR functions via the HDHomeRun app on my laptop and on my phone. I started recording a program already in progress. I scheduled recording for a program that would start about a half hour in the future. I used the search bar to schedule recordings of all NFL games, on any channel, at any time. Super easy. The quality of the recording is great. Here's where things get a little less than ideal. I could not for the life of me figure out how to use the DVR functions from the Roku app. I submitted a support ticket to Silicone Dust, and they told me how to find my recordings (just hit the "back" arrow button on the Roku remote), but I can't schedule recordings from the Roku app... yet. I'll paste Silicone Dust's email below: The Roku version of the HDHomeRun app is getting some long overdue updates to help bring it in-line with the HDHomeRun app for other platforms. We'll be adding the ability to schedule recordings, search guide data, and more, in the coming months. When you open the Roku app, it will start playing the last played channel right away. Pressing left/right arrows will bring up the live channel switcher. Icons and guide data might take a moment to load, and we are working to improve those loading times. Pressing "Back" from live TV will bring you to a new "Live/Recorded/Discover/Tasks" screen. Selecting "Live" will bring you back to the live view on whatever channel was being watched before Selecting "Recorded" will show recordings if you are using the HDHomeRun DVR service Selecting "Discover" will give you our guide discover view. Selecting a TV program from "Discover" will show a summery for that program, and will show the current and future episodes (if the program is a TV show and not a movie). If a program is available on more than one channel, you will also see those options listed here. In the future you will be able to use this view to also schedule recordings if you are subscribed to the HDHomeRun DVR service.

Update: January 7, 2026 I will upgrade my original 3-star review and criticism to 5 stars now, because several updates to the HDHomeRun's firmware have resulted in a stable system that can now provide very good connections to all of my devices, including Roku TVs. All good now, and I'm very pleased with it. Like many new devices, the firmware often lags the release of the hardware. The newest firmware (and hopefully that's what ships with newly-purchased models) has closed the loop, and I'm a very happy customer. I can also report that it works consistently and well with my Linux server that hosts Jellyfin in my home. Happy, happy! --------------------------------------------------------------------- This is my first day with this device, and it's been a long day because I just can't leave an unresolved issue alone! The picture quality is excellent! It easily found all my local channels, and there were a lot of them in the Salt Lake City area where I live (Utah County). Even though mountains get in the way, it still worked well. I have a 4-bay UHF antenna with built-in amplifier in my attic to reduce the effect of a 75-foot coax cable. OK, so that's the good part. Now the not-so-good part: The apps are quite (ahem) variable. It took me two hours of trying over and over again to get either of my two iPhones (X Pro Max, and 13 Pro Max) to connect. The app kept reporting over and over that it couldn't find the tuner. I had exactly the same problem with my two iPads (a 9th gen, and a 3/2025 version). All using the latest OS updates, and all gave the same report--no tuner found. I accidentally discovered the key: Reboot the phone or iPad! It worked fine on all 4 devices after a reboot of each. My new M4 Mac Mini also stumbled but finally connected. Roku support is really terrible. One TV works great with the HD HomeRun (channel) app, but after I exit the channel, it totally disappears from the home screen. Each time I want to use it, I have to re-load it by searching for it in the channel store. That's just awful. I also have a 2-month-old Roku Ultra, but it refuses to find the tuner. The weird part is that it says it is trying to locate an MDU (from Silicon Dust's website, this stands for Multi Dwelling Units--a commercial product). Roku is the most popular TV OS in the USA, and this company is going to sink themselves if they can't get a decent Roku app fixed right. Roku has tens of thousands of other channels and apps, and these guys stand alone in somehow not being compatible! I also had trouble following their incredibly skimpy instruction sheet provided in the box. It assumes too much, and doesn't provide any remediation if something doesn't follow the ideal scenario they describe. I downloaded and installed the Windows 11 app from the Microsoft Store per SD's instructions, and it too could not find the tuner until I went to the command line and pinged the tuner's IP address I was able to determine with Advanced IP Scanner (a free piece of software that allows you to scan your own home wired and wireless networks). After I was successful is getting pings back from the tuner, suddenly the Windows app discovered it. Maybe pinging it helped the weak network discovery process in the app. Dunno for sure. The Google TV app works fine BTW. No issues there. So anyway, I hooked up a USB drive and tested the recording and DVR capabilities, which worked just fine. It worked well enough that I decided to buy the extended DVR recording capabilities. That went well. You buy the $35/year license, get a code from an email they sent within just a few minutes, enter the code, and it just works. Hey, some of the software works! So...do I plan to keep it? Yes, but mainly because I'm going to connect it to my Jellyfin server, which will help me avoid the use of the horrible apps these guys are putting out right now. All my TVs and players will interface with the tuner through Jellyfin. Their user interface (UI) reminds me of the much-hated BMW i-Drive from the mid 2000's: Wonky and built to one person's view on how a UI should be built. Not at all intuitive, but I guess I can get used to it. Some of the keyboard or remote control key commands either don't make sense, or don't work at all. This is the case for all devices I tested, whether on Windows, Mac, iOS devices or TVs. A rookie mistake I see on all of these interfaces is that they sometimes highlight two different unrelated menu actions at the same time, causing you to press "OK" or "Enter" and something unexpected happens. For example, "Live" has a shaded focus, indicating that you just moved the cursor to it, but "Recordings" shows as brightly bolded. Which do you think will take effect when you press OK? I still don't know, but I think it's "Live". As a user, I shouldn't need to guess. I included a photo of this very thing, taken from an Android TV screenshot. In another example, pressing some of the buttons on the Roku remote results in a black screen with no sound. Just sits there doing nothing until I press something else to recover. A good UI designer would map all possible keystrokes and trap them for at least a default screen like, "Sorry, try again" or similar. Rookies. In summary: Great hardware (5 stars), and I hope the software (apps and UI = 1 star or less) can catch up. This also includes the underlying software used for device discovery that needs serious help. It seems to me that network discovery of the tuner should be the first priority, because that's what everyone first has to face. I can't see their code, but in my opinion, they have some timing issues. The software does a network scan in less than a second, then gives up, asking the user to hit the retry button. The "retry" should be happening automatically for some timeout period. Each time several of my devices failed to initially "find" the tuner, another device was nearby, either pinging the tuner successfully, or playing video from one of the 4 channels. And yes, I also tried this with no clients connected, just to make sure it wasn't a congestion issue, although it's all connected over 2.5Gbps Ethernet and/or Wi-Fi 6. I respect all the effort put into this system by SiliconDust, and I don't want to see these guys go under because they couldn't get decent programming help.

So far I have been using this device for a few months. I have it connected to am OTA antenna and wired to my home network and integrated with my Plex server running on an M2 Mac Mini. Setting up the device was easy and locating it in Plex wasn't hard at all, and the guide feature works great, however playing content on an Nvidia Shield that I use in my living room to stream from has been a nightmare when in Plex. Most ATSC 1.0 channels will either cut out or not load entirely while watching in Plex, however using the HD HomeRun app they work great so I know it's not my antenna, network or signal. Even though I am in the market for ATSC 3.0 I have yet to get to test this as the channels are encrypted and unfortunately this device is not capable of decrypting those signals. I don't hold this against it at the moment since it's more of an issue with the broadcast company and the standard itself but do keep this in mind. If I could figure out the bugs in Plex, this would be a 5/5

This is by far the best TV Tuner out there. Living close to an airport I've always had problems with multi-path interference from low flying aircraft or windblown trees so after learning about the how the new ATSC 3.0 tuners worked to alleviate these problems, I jumped at the chance to try the HD Homerun Flex 4k. It's true. The 3.0 tuners have alleviated the problem. But the thing with the Flex is the ATSC 1.0 tuners do a pretty darn good job of alleviating the problem as well. My Tv's tuner is terrible. I get breakups all the time on it. I had a Tablo that did a little better, but I hated how it took 5 seconds to change channels. I also had a Fire TV recast and its tuners were ok, but it downscaled the picture and the PQ was pretty bad. You could change channels faster, but it took a few seconds for the picture quality to get up to HD. The Tablo and Recast PQ had a compressed look to it. The HD homerun Flex 4k blows them both out of the water. The PQ is the same as if you were getting it straight from the antenna. I use the HDHomerun app, and I see no compression whatsoever. It really is an awesome picture. Changing channels is fast. The 3.0 stations take a couple of seconds longer. Right now, I don't see a reason to use the 3.0 stations because the 1.0 tuners do a fine job. In Orlando we get all the major Networks in ATSC 3.0, though the NBC station has turned on encryption. Silicon Dust says an update will be forth coming to allow viewing of DRM encrypted channels, but this isn't something you can bank on. Right now, ATSC is up in the air. It may all go away so who knows. None of the stations are doing 4k, it's all 1080. Be that as it may, I'm really happy with the 1.0 tuners on this thing. I use the HDHomerun app. People dis it all the time and use the Channels or Plex apps but those require a computer. I don't want to have a computer on. Plus, the Channels and Plex apps transcode and that can affect your PQ. The HDHomerun app does no transcoding. It's basically 4 tuners streamed wirelessly to your whole network. A decent router is required. If you can get 4k from your streaming apps you'll have no problem with this. I signed up for the $35 a year DVR and guide service. Less than $3 a month. I stuck a 256gb micro-SD card into a Micro/USB adapter and it works great. The recorded quality is a whatever the tuner received. No compression. If you use the HDHomerun app, go into setting and TURN OFF SLICE VIEW. Then you get the normal grid guide by hitting the up or down button. To close the guide hit the back button. People dis the app because of the slice view, which I admit looks pretty bad but it actually is great for touchscreens like a tablet or phone. Setting up is easy peasy. You can do it all from inside the app. Here's a hint, don't delete channels. Just click on the ones you don't want by getting to the red X. If you delete them, when the homerun does a scan, it will add them again. As you can tell I'm pretty happy with this product. I'm actually blown away. I could have gotten away with the 2-tuner dual flex for nearly half the price, but I got a $100 gift card from my employer so decided to put it towards this. If you're buying this for 4k, the tuner can do 4k, but nobody is broadcasting it. You can't really blame that on Silicon Dust.