Enga Hand-held Shower Head Set - Oil Rubbed Bronze Brass Handheld Shower Wand with Wall Mount Adjustable Elbow Holder and 59inch Long Hose - Modern Rectangle Hand Shower High Pressure

Product is too loose in the correct position. Once tightened to the max allowable it’s in the wrong spot.

Very happy with this product. Looks good, feels heavy, and high quality. The dimensions in the product image are correct: the square body is 30mm side length. That's a diagonal of 42.4mm so a circular hole of diameter 42.4mm is covered by the escutcheon which has a side length of 50mm. A 1-5/8" hole (41.2mm) would be tight to rotate the body into but could be opened very slightly with a dremel (or the drill bit wiggled) if need be. A 1-3/4" hole (44.5mm) would have more room but must be perfectly centered on the drop ear elbow otherwise the escutcheon won't cover the hole on one side. My drop ear elbow was 41mm below the tile surface. Product B0CMXMND8W with total length 2" including threads (1.5" extension), worked out perfectly for me and the body ended up just above the tile surface by 2mm. I contacted the seller, following the description's advice, and they refunded the cost of the adapter. Hope this helps anyone else in the same situation as me. I used Blue Monster PTFE tape, not the included tape, and wound it on tightly in the correct direction (clockwise when looking at the end) so as not to unwind when tightening. I started with both NPT joints just hand tight to make the final "one more rotation?" choice easier. Had I fully tightened the extension to the body first, I might have ended up with the hose outlet pointing upwards. I greased both sides of both hose washers to reduce friction when tightening: Oatey Plumber's Faucet and Valve Grease. Check your drop ear elbow is screwed firmly to blocking to counter the force needed to rotate the NPT threads. Don't forget to slide the escutcheon on before tightening! Oh, and they include gloves!

This spray wand is metal and has a good weight, doesn't feel flimsy. The female threads in your wall need to be level with the surface to get a good seal, if your connection is recessed you may have to find a replacement nipple for the shower head. The oil rubbed bronze finish has plenty of the 'rubbed' areas to make it not look black.

I wanted a bronze finished hand held to compliment my new shower install and preferred one that wasn't plastic. This is my first purchase of Enga products and its solid design seems up to the task. The color and finish blended right in with the other fixtures.

Easy to install. Quality was top notch