1/4" Torque Wrench Handife 5-25 Nm Drive Click Torque Wrench Set Bike Maintenance kit 1/4 Inch High Precision Repair Spanner Key with Double Scale, Two-Way Ratchet with Wrench Socket Bit Extension Bar

I bought this tool kit for my Radrover 6+ eBike. The kit contains most of the necessary tools needed for basic maintenance. It's too big to carry on the bike but handy to have available when the bike is stored.

Reasonably accurate out of the box. Tested the wrench with various weights at bottom, mid and Max torque settings all within listed manufacturer's specs. Wrench came with a decent assortment of attachments in 1/4". I use this torque wrench allot for metric fasteners on motorcycles. Clicks when reaching desired torque were positive(feel and hear) and repeatable in resistance. Range of torque span wasn't too wide causing accuracy errors at far ends of range (min - Max), but has wide enough range to cover almost all my 1/4' bolt/fastener requirements. Would buy again.

I didn't want an expensive torque wrench like Snap-On or Mac Tools for my needs, so I chose this one. I have a motorcycle that requires some small 8 mm hex head bolts to be torqued at 7.1 -14.8 Nm. It has both Inch lbs. & Nm scales. The handle lock is kind of weak but I managed to keep it locked for my needs. It does come with a couple of Philips Bits (1/4" drive) & 6, 8, 10,12, 14 MM 1/4" drive sockets along with 7 various size Allen bits (SAE) & T10,T15,T20,T25, T30 1/4" Drive Bits & 1- 4" extension. For the money? It's worth it to me.

I bought this torque wrench specifically for bike repairs and maintenance. It looks and feels well-made and comes with a decent storage case. Anyone looking for an accurate and budget-friendly 1/4" torque wrench for bike maintenance and repairs, you won’t go wrong with this Handife 1/4” torque wrench

Used if for about three months now. Worth every penny. A must have for a high end bicycle. Setting are easy to use and accurate. Very pleased.

Just what I needed, does everything I needed to do!

Not bad set for the price. I would definitely bye it again.

This was a okay product for a top end engine job that required a in-lbs torque but the bits rusted and the adjuster cap on the bottom for the spring fell off and got lost inside the engine compartment somewhere. I don't truly trust the measurements of this item because the selection lever at the head level reverse goes way past the stop notch plus the fact that after a month sitting it started to rust and now im stuck with a rusted tool and now way to ask for a refund. I did use it for the VVT rocker arm replacement and I just hope its all tighten enough to run the engine at speed. The smoke is called burnoff not a oh crap call the fire department. So its up to you all if you want to purchase this product.

Talvolta gli appassionati di meccanica non usano, commettendo grave errore, la chiave dinamometrica per i serraggi. E' fondamentale sia che si tratti di moto, biciclette oppure auto. Ci sono dei serraggi che non devono e non possono essere fatti a sensazione, ma devono essere fatti con una precisa forza. Questa chiave è ben costruita, arriva ad esercitare una forza di 25 Nm e va bene per la maggior parte dei serraggi da fare su cicli, motocicli, kart e chi più ne ha più ne metta. Ovviamente non è indicata per il serraggio dei bulloni ruote auto, per quelle servono coppie maggiori. La chiave è di qualità e viene fornita con un certificato di taratura. E' corredata di diversi accessori e bussole e prolunghe per poter effettuare i serraggi. Consiglio l'acquisto

It clicked at 3Nm regardless of your torque set-up. I returned it

Fais le job

I have a torque ratchet set for my car, as I do my own maintenance so when it was time to service my mountain bike, I thought I would treat myself to a nice set. When I do something myself, I know it has been done right and I get the satisfaction of being able to do things for myself. Price at review: £41.99 I wasn't looking to go for bottom price. I would rather buy something that is going to last a lifetime and save me money overall by spending a bit more first time. I went for this set because it mentioned coming with a calibration certificate, which in my mind meant I could trust it to do what it says. The fact it comes with a certificate and is not the cheapest product helped me make up my mind. If you have wondered onto this page just looking for a set that you can use to tighten and loosen bike parts and don't care about torque, you can save yourself some money by buying a different and cheaper set. If you have an expensive bike or another reason to care for your bike, you should think seriously about getting this set. A torque wrench allows precise tightening of parts and stops you from accidentally tightening too much, which can warp or shear parts off your bike. It basically stops you from breaking your bike and the cost and frustration that would cause. So torque can also be referred to as clamping force. If you apply too much force to bike parts, especially brake rotors and callipers (which heat up a lot) it can cause bolts to snap. If a bolt on any part of your bike snaps when you are going down hill, it would be extremely dangerous. First impressions Good The set comes in a black, well designed set that holds the bits firmly The set is quite heavy and picking up the torque wrench reveals it is well balanced and reassures me that it is a quality tool because it is weighty The handle is a good size to fit in my hand and the grip is comfortable to hold and works well The writing is very clear and easy to read and the torque can be set either by pounds per square inch or newton-metre It is very each to use without reading the instructions, to change the torque you pull the silver metal collar down with your thumb and index finger and it stays unlocked until pushed back up Includes a calibration certificate indicating it is accurate to within 4%, which means it can be used with peace of mind by professionals and amateurs alike Could be better Turning the handle to change the torque is quite hard and not completely smooth, particularly if changing from one extreme to another and having to twist the handle for any length of time Thoughts after use This is a tool that anyone could pick up and easily use without much thought and now I have it, I don't have to worry that I am going to overtighten bolts any more. The case is good quality and tough, providing protection from moisture and means I am not concerned about rust or damaging the parts. All the parts connect nicely and once put together they are held securely. Once torque is set and the correct amount of pressure has been applied, you receive a clicking feedback to indicate you are done. Once finished, it isn't frustratingly difficult to remove the parts and putting them back in the case is easy. In use I witnessed the quality of the parts, which is immediately apparent when you start working at greater torques. As you would expect in this price range, none of them snapped or twisted. I put them through their paces and now know I can rely on them when I next come to service my bike. The price is fair for the quality and I would recommend this to anyone who wanted to start looking after their bike properly.

Titel: Zuverlässiger Partner für präzises Fahrrad-Montieren - Handife Drehmomentschlüssel im Test! ⭐️⭐️⭐️⭐️⭐️ (5/5) Als begeisterter Fahrrad-Enthusiast habe ich den Drehmomentschlüssel der 1/4 Zoll Serie mit 5-25 Nm Drehmoment ±4% ausgiebig getestet und bin absolut begeistert. Dieses handliche Werkzeug hat sich als unverzichtbar erwiesen, um meine Fahrradreparaturen und Montagearbeiten mit höchster Präzision durchzuführen. Der Drehmomentschlüssel wird in einer robusten Verpackung geliefert, die ihn vor Beschädigungen schützt. Die hochwertige Verarbeitung und das ansprechende Design machen bereits beim Auspacken einen positiven Eindruck. Die beiliegende Bedienungsanleitung ist gut strukturiert und leicht verständlich, sodass auch Anfänger problemlos mit dem Werkzeug umgehen können. Die Einstellung des gewünschten Drehmoments ist ein Kinderspiel. Das gut ablesbare Skalenfenster ermöglicht eine präzise Justierung in 0,1 Nm-Schritten, was besonders wichtig ist, wenn es um empfindliche Komponenten wie Carbonrahmen oder Leichtbau-Lenker geht. Das Einstellen des Drehmoments erfolgt intuitiv und erfordert kein zusätzliches Werkzeug. Die Verwendung des Handife Drehmomentschlüssels ist äußerst komfortabel. Der ergonomische Griff liegt gut in der Hand und ermöglicht eine angenehme Bedienung. Das Gerät gibt deutlich spürbare akustische und haptische Signale ab, wenn das eingestellte Drehmoment erreicht ist, was die Arbeit noch sicherer macht. So lässt sich ein Überdrehen der Schrauben problemlos vermeiden. Ich habe den Drehmomentschlüssel bei verschiedenen Fahrradreparaturen eingesetzt, darunter Montage von Lenker, Sattelstütze, Kettenblättern und Pedalen. In jedem Fall hat er sich als zuverlässiger Partner erwiesen und mir das Vertrauen gegeben, dass alle Schrauben mit der richtigen Kraft angezogen sind. Die Präzision dieses Werkzeugs ist bemerkenswert. Das Drehmoment ±4% sorgt dafür, dass man sich auf die exakte Anzugskraft verlassen kann, was insbesondere bei teuren Komponenten von großer Bedeutung ist. Dadurch wird das Risiko von Schäden durch übermäßiges Anziehen minimiert. Zusammenfassend kann ich den Drehmomentschlüssel der 1/4 Zoll Serie mit 5-25 Nm Drehmoment ±4% allen Fahrrad-Enthusiasten und Hobby-Mechanikern wärmstens empfehlen. Die hohe Qualität, präzise Arbeit und einfache Handhabung machen ihn zu einem unverzichtbaren Werkzeug für Fahrradmontage und Reparaturen. Investieren Sie in dieses erstklassige Werkzeug, und Sie werden es nicht bereuen. Es hat meine Erwartungen übertroffen und ist jeden Cent wert!