QWORK Solder Pot, 150W 110V, 50mm Soldering Bath Titanium Plate, Capacity 500g 200-450°c,Include Extra 50mm pot& Solder Paste Scraper for Welding and Soldering Bath

At the price I paid I was not expecting very much, but I've been surprised at how well this pot is built. It works great. I expected it to take a long time to melt 16 ounces of solder given it's modest power rating, but it not that long at all. The size of the pot is perfect to easily hold a 17 ounce solder stick. The first melt takes longer because there's not much heat transfer surface, so I found it needed a bit of a rub of the stick to get it started, but once the bottom of the pot is covered with metal the rest melts pretty quickly. After the solder is melted the first time, it melts very quickly the second time (I'm guessing about 10 minutes) because of the perfect pot to metal contact. The included stirring stick is perfect size to clean off the cruft from litz wire insulation. I turn it up to about 7.5 or 8 on the scale and it gets plenty hot plenty quick.

Delivered before estimated arrival. As advertised. Meets my needs. Very happy with the price.

Works great for a solder pot and rosen pot. After reading some reviews on these units that the cases are thin or too light weight I was little concerned. I found that they are light weight but just fine. No flimsyness. Light but solid. Better for heat dissipation and breathing. Heats up quick, not as quick as a higher wattage unit however fast enough. Melted a half pot of 60/40 mix in a round 10 minutes on setting number 6. Forgot the actual temperature as I did measure on several settings and it maintained an even temperature in it's perspective range and after cooling down and starting back up readings and temperature ranges were repeatable and reliable. Now for the only con. The feet are hard plastic and very slippery. Makes the pot move too easily. Not good. This can be a dangerous thing.I replaced them right of with silicone feet that have a little suction to them. I absolutely recommend this and for those who can't should secure the cord so it can't be pulled and the pot unit be boxed in a little or secured from being able to be moved easily. Last but not least is the pots change out easily enough and they are tin coated which is good. They are a almost perfect size for a small bench or work space and really wished they made a small side by side double unit in a compact form. Double controls and pots. 4 stars because of the feet. Or I would have made it 5. Included 2 pics of the new feet.

For the price, this is a no-brainer. I use it occasionally to tin wires, especially challenging ones like ultra-thin bundles of enameled wire commonly found in audio work. For that purpose, it works perfectly. The build quality isn't the best, but it functions well so far. Heating is a bit slow, durability questionable, but at $15, that's a reasonable tradeoff. I do wish it came in a smaller size—maybe around 25ml or even 12ml—as the included 50mm pot is still oversized for occasional fine wire work. Overall, this is a functional, budget-friendly tool that's great for light-duty use. Excellent value for the money!

I've bought a few of these over the years. The first one lasted a reasonable amount of time, but after the 3rd or 4th purchase, I've noticed the longevity of this solder pot is getting less and less. Works fine, but reliability is maybe getting worse

The solder I ordered to fill it did not arrive so I have not used it yet but it looks to be well fitted for my project

The leaflet enclosed lists 4 models to which the one leaflet apparently applies: 11C - 100W 21C - 150W 31C - 250W 41C - 300W However, unlike the device depicted in the Amazon web page, there is no such indication anywhere on the device - just two indications ‘HT-A’ and ‘HT-B’ on the faceplate, which I assume to be models, with a red dot having been inked beside the ‘HT-B’. Further, the leaflet warns that the device is for 220VAC, 50 Hz (eg UK), although the plug is a standard 110VAC US grounded plug Also, there is no indication that the design has been tested and certified by any US regulatory body or industrial standards organization. I plugged the device in, switched it on, the switch illuminated, and i could feel the solder pot heating. However, because of the lack of definitive indication on the device, as well as the confusion concerning the supply voltage for which the heating system is designed, I have absolutely no idea what actual wattage this device is, and whether it is suitable for my tasks. I feel certain the item I received had been delivered previously (although not used, apparently), and returned: 1. The sticky side of the piece of adhesive tape used to close the bubble wrap bag wax folded over against itself. 2. The twist-tie used to wrap the electric cable was loose in the bag 3. The switch was in ‘On’ position 4. There were fingerprints on the faceplate Therefore, rather than testing it with solder in it, and also risking electrocuting myself due to the lack of certification, I am returning it unused - just as the previous recipient evidently did!

Tins absolutely perfect.