Wall Mount, Tilt and Swivel Bracket for 14-32 Inch LED/LCD/OLED Flat & Curved TVs, Support 25kg, VESA 75x75mm-200x200mm, MT3202

While the instructions are for a wall mount which includes details for plastic parts you clip n cut etc that just dont apply to this product. Its a very simple 2 pieces of steel that is kind of idiot proof regardless. The included spirit level helped (clip it in, no need to balance anything ontop) screwed one part into a wonky old brick wall and everything bent into place fine, the second parts i screwed into the back of the monitor will plenty of optional/variations of screws for different types, slide it one and twisted the long screws underneath until finger tight.It was a bit wierd the supplied bolts were bigger than the largest wall plugs...like there was NOTHING from the kit the bolts could of been used with so using the largest long screws it fit in perfect.Basically, a jamble of stuff in the box with messed up instructions but its cheap and does the job solid (mounted a 24 inch pc monitor).

The instructions aren’t exactly clear, there are plastic parts it tells you to attach to the mount which aren’t there. The fittings are labelled in a bag but don’t match up to the instructions. More frustrating than anything is having to purchase more screws because none of them are long enough to fit the bracket onto the tv!!

The contents arrived without one of the spacers so I had to make one myself. The provided plugs were hard plastic and 3/4 cracked when inserting so I had to use other ones. The provided screws were slightly too long even with both sets of spacers and one was still slightly loose when I mounted the TV.

I bought this as it was recommended to me by a work colleague who says this is very sturdy. It was fitted by a friend who is very handy with DIY so all went well. My 55 inch Tv is hanging very nicely.

This is easy to assemble and you may find that the screws that come with it will not fit all tv models. I have a Samsung which I had to get different screws for the bracket on the TV.

Easy to install bracket,all bits included ie screws,washers, spacers etc. I've installed a few of these now over the years and very easy to install just need drill and crosshead screwdriver (it comes with own spirit level) only hung a 24ins on it so not huge weight but very sturdy and trust it to hold

Used it to fit a 32" tv to a wall. Very easy to fit, no assembly of the frame needed. All the hardware you need is supplied, plus the alternative fittings. A great little bracket kit.

The product had no built in spirit level as described. This wasn't an issue as I would always use a longer level for this type of work. What was poor were the wall fixings. Far to big for this product and ended up using my own. Wish I had paid more for a better product. Having said that I have hung my TV from it and its fine although I have used my own fixings.