Guyker 2Pcs 3-String Retainer/String Guide for Electric Bass Head Retainer String Tree String Buckle Guide Groove Bass String SR5, Chrome

I can discern no difference to the other brands. You'll just need your own screws... and measure twice. I got this on a 90's Mexi Jazz and a Harley Benton copy of a Fender Musicmaster/Mustang Bass. Works as it should.

Headline says it all. At first I found the lack of mounting screws to be a hassle, but given this could be application-specific, I'm kind of glad they didn't send mounting screws that I'd have just put in without much thought, only to have them end up being too short/long. For reference, I settled on 6 x 5/8" oval heads, which seem to do the trick for the headstock I mounted this too, but 1/2" def would have been too short and 3/4" would have busted through the headstock.

Work perfectly and look great! Cheaper than Hipshot versions.

It does what is supposed to do. Decent chrome.

No screws included for mounting. A nearly identical listing has them, though.

The product is as described. However they did not include the four screws to install the string trees.This is really inconvenient as I will need to go to the local hardware store, and will most likely not find a metric the exact pan size and finish that will only dig 1/4" into the headstock. Bad show Guyker.This is a wasted man hour and gas I could have saved using another brand.

This was the bad black finish on mine, so I'm going to return them.

Way cheaper than the Hipshot version that it's a ripoff of. The plating/quality is fine considering how cheap they are, but you just kind of *know* by looking at it that it's cheap.I installed them on a Squier Mini P bass and a Harley Benton J bass. The fit is perfect on the Squier (which is smaller than a normal short scale bass) and just *slightly* narrow on the Harley Benton (which is a standard 34" scale Jazz bass copy), so the A string leaves the retainer going towards the tuner at a slight angle.Buyer beware: these *DO NOT INCLUDE MOUNTING SCREWS* That's pretty stupid considering a normal string retainer only mounts with 1 screw. If you don't have screws on hand, order some pickguard screws and have a ton of extras (or take your old string retainer screw to the hardware store to find a match).

worked well, good quality.

Buena mejora para tu bajo, sistema que debería ser el estándar de la industria

String spacing is right!

Replaced the standard two string tree with this, great improvement. Fenders are notorious for unfretted buzzing from the A string due to insufficient break angle behind the nut - this solves that poor design problem. Position it carefully and use good screws as it takes a lot of strain. The only downside is the screw hole left by the original string tree, but I can live with that if the bass plays properly.

Wenn es das Teil jetzt auch noch mit kleinen Rollen gäbe, würde ich die Saiten sogar liebend gerne durchfädeln. Dann wäre der Widerstand nämlich geringer, was das Stimmen noch mehr erleichtern würde. Geht aber auch so, ist funktional und schaut gut aus. Klare Empfehlung.