LLPT 94 Adhesion Promoter 10ml Bottle Primer 1 Pack with 10 Dry Wipes | Evaporable, Heavy Duty, High Bonding, Invisiable, Fast-Drying, Brush-On for Automotive & DIY, Enhances Bonding

It works well as intended. I was able to get some carbon fiber trim to stick on my door panels. I first tried without the adhesion promoter and the trim would not stick. Once I applied the liquid and let it dry, it stuck perfectly. It's a good product but the pads are not very wet so even though the part I was attaching was rather small, it took two pads to get enough on the panel to allow adhesion.

I used this to mount a LED flexible light strip in my vehicle because double sided tape alone wasn't holding tooo well. I used this and it the double sided tape has been holding for a few months now with no signs of failure. This stuff works and easy to apply and worth the money.

As others have said, the pouches are just a dried up cloth in them. The product in the bottle seems to work just fine.

I understand that some people received leaking packages, but there was no problem with my order. The two bottles are shipped nestled in a foam block inside a cardboard box so there is practically no way that they should arrive broken, and I'm thinking that earlier problems may just have been from the tops not being screwed on tightly. I used this product to promote adhesion between a 3M VHB adhesive pad, and a 3D printed fitting of carbon fiber reinforced nylon filament (typically difficult to adhere) to mount a tablet on an exercise bike, and it appears to be working perfectly.

Works perfectly!! I use for installing emblems and accessories on vehicles that use 3M double sided tape.

I used this product to prep for the installation of new “badges” on the doors of my truck. They have been on for sometime and withstood several automatic car wash trips.

It goes on without dripping which is a huge plus when installing emblems that have 3M sticky tape

When mounting stuff on the car, you definitely need to use adhesion promoter, even for the most expensive 3M mounting tape. This several dollar extra will save you hundreds dollars on the road and headache. This aftermarket promoter works effectively, same as the 3M one. It promised a strong bond and my rain guard survived thousands miles of rain, snow and sun .

Previously I had cleaned the area of my car's dash with 90% rubbing alcohol, and applied my 3M Dual Lock which had the acrylic backing tape. It held fine for a couple of weeks, but slowly started to let go, so I bought this adhesive promoter to see if I could improve the bond. I re-cleaned the area with alcohol, and taped off the remaining area with masking tape so as not to get the adhesive promotor anywhere it wasn't needed. The area has some texture to the plastic, so I did three coats of adhesive promoter, letting each coat dry for a few minutes. Then I applied a new strip of Dual Lock and the bond was immediate. No second chances on alignment! I'm glad I got it right the first time. Clearly a superior bond vs without the adhesive promoter. I only needed a single foil pouch to do all three coats, and the applicator had plenty of product on it, not dried out as many have found. I did tighten the lid on the included bottle when it arrived, as there was a strong smell of the product on arrival, but no apparent leakage of the fluid.

I was to stick a security camera with 3mm tape and this adhesive promoter on a wall and it seems to be holding well even during winter!

Reçu une bouteille avec rien dedans ...La bouteille est vide

Used them for installing a lip spoiler and mirror caps. I’m not sure how they would hold without this, but the install seems to be very solid. The wipes are a little rough so would not recommend using it directly on paint, just apply some directly from the bottle and use a cloth to apply

Perfect adhesion to material.