⚡ Elevate your 3D printing game with power and precision!
The iMetrx Nema 17 Stepper Motor (42x34mm) delivers 20-25% higher torque with a low noise profile, featuring a precise 1.8° step angle and durable bearings. Designed for FDM 3D printers, it offers reliable, long-lasting performance with a 1-meter cable for easy integration.
| Manufacturer | iMetrx |
| Part number | MX-ED-SM423401 |
| Item Weight | 249 g |
| Product Dimensions | 4.2 x 3.4 x 4.2 cm; 249 g |
| Item model number | MX-ED-SM423401 |
| Size | Nema 17 42-34 |
| Colour | 1pc |
| Material | Metal |
| Voltage | 3.8 Volts |
| Horsepower | 5.7 Watts |
| Item Package Quantity | 1 |
| Speed | 1.5 Amps |
| Batteries included? | No |
| Batteries Required? | No |
J**S
Unfortunately had a faulty unit
Unfortunately received one that had some form of issue, the motor vibrated and didn't move how it should, the controller Im using is fine as I reordered another nema from Amazon and that one worked perfectly
E**Z
My printer is now 3 times faster with 5000 m/s2
The media could not be loaded. Incredible, I replaced the X and Y motors of my Ender 3 Pro with 42-40 ones of this and I was able to increase the acceleration from the default 500 m/s2 to 5000 mm/s2, and probably can go higher with a little more voltage, but I'm quite happy with the current speed, with the input shaper and the linear advance features of Marlin, now the printer prints 2.5-3 times faster with higher quality. Though the top speed is still limited with 120 m/s as the hot end can only melt around 12-12.5 mm3/s of filament. The model in the video normally prints in 12-13 hours, I was able to complete it in 5 hours, unbelievable... I increased the default voltage from 580 mV to 850 mV and that's it. The original motors, especially the X motor was getting too hot, around 50 °C, even with an acceleration of 1000 m/s2 and the aforementioned 580 mV input voltage. The new ones never go over 30 °C. I'm super happy and planning to buy another 5 of these to replace the Z axis and my MMU2s motors. Oh, I didn't need to change my printer cables, these were a drop-in replacement, my board is an SKR 3 EZ.
H**J
Powerful motors
Bought these to use with a 4:1 pulley for some moderately heavy Venetian blinds. Only gripe is that without idle hold enabled, then still turn when under load.
C**.
Very quite Steppers
I was surprised by how quite these stepper were using a4988 motor drivers they don't sing like my other steppers.
A**R
Don't be fooled. These are not 1.5A
These are not 1.5A. They trip out at anything over 600mA
E**N
Quality product
Great product. I've conducted multiple tests with these steppers and they work well with the motor drivers I purchased and have some very long cables which will be immensely useful for my project. These arrived in a well packaged box and will purchase from here again when I need more.
Trustpilot
1 day ago
2 weeks ago
