Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

I recently upgraded my Ender 3 3D printer with the Creality Official Extruder, and I couldn't be happier with the results! This aluminum drive feed Bowden extruder has truly transformed my 3D printing experience, and I'm excited to share my positive experience with it. First and foremost, the build quality of this extruder is top-notch. The aluminum construction not only looks sleek but also feels incredibly sturdy. It's a significant improvement over the stock plastic extruder that comes with the Ender 3. The durability and precision of the Creality Official Extruder are immediately noticeable. One of the most significant benefits of this upgrade is the improved filament feeding mechanism. The extruder grips onto the filament with a firm yet gentle hold, eliminating the risk of slipping or grinding. This translates to smoother and more reliable 3D prints with fewer extrusion issues. I've noticed a significant reduction in under-extrusion problems, which were a common occurrence with the stock extruder. The installation process was a breeze, thanks to the clear and concise instructions provided by Creality. I was able to swap out the old extruder for this one in under 30 minutes, and I'm not particularly skilled in DIY projects. It's a direct fit for the Ender 3, which means no additional modifications are required. Another standout feature is the easy filament change mechanism. Loading and unloading filament has never been so hassle-free. This makes filament swaps quick and straightforward, minimizing downtime between prints. Overall, the Creality Official Extruder has significantly improved the performance and reliability of my Ender 3 3D printer. The build quality, ease of installation, and enhanced filament feeding system make it a must-have upgrade for any Ender 3 owner. I'm now enjoying more consistent and high-quality 3D prints with fewer headaches along the way. If you're looking to take your 3D printing to the next level, I highly recommend giving this extruder a try. It's a game-changer!

Well creality has done it again another great printer upgrade this is made to the highest standards and it a must for upgrading your printer after having extruder issues I decided to upgrade from the plastic one that comes with the printer to this metal one and I was not disappointed problem solved highly recommend

I like it. It works, need to recalibrate the printer to work with it which was hard. I had to run the moto in reverse. It is a shame that ghe design isn't symmetrical so it can't be mounted either way on my printer which is Flsun Q5

Sadly the horribly plasticky extruder that comes as standard with the Ender 3 V2 snapped after a few dozen hours of printing.The plastic cracked around the heat-inset, on the tensioning arm, that is used to hold the drive wheel in place, this meant there was inconsistent tension on the filament so kept getting random under-extrusion during printing. This all-metal (aluminium) extruder is an effective replacement. It is not going to snap,it was easy to fit and just works. It was also a reasonably price, there are other all-metal extruders out there (for the ender3 v2) but they cost more as they come with a bunch of pointless "extra" stuff (nozzles, springs, pneumatic connectors, etc). Basically Creality should have fitted this as standard equipment, it would have added a few pounds to the base cost of the printer but would have been worth it to avoid all the wasted filament and frustration. I am happy with this all-metal extruder.

The parts are miles better then the stock ones but having to now go and get a new tube is a kick to the .... ya know (anyone knows where I can get one that fits lmk)

The instructions are not very clear. The product page for this extruder has a video which is very good. I followed it on my phone, wihile constructing the new extruder. I watched a bit then paused and did the next bit and this is how I would recommend people to do this. You'll have to go back and rewatch bits multiple times when you don't understand exactly what the person in the video is doing. I had to think carefully about which screw would be used on which part, and managed to do it first time. Just take your time. Now that I have it fitted, the extruder seems to be working well. I bought this because I had issues with filament not being pulled into the printer properly, and ending up with missing layers in prints, which caused failed prints. The replacement works well, pulls filament into the printer properly and prints complete properly and look good. The red colour doesn't particularly suit the black Ender 3 Pro well, but I didn't buy this for its aesthetics. It's made of aluminium and seems to be reasonably sturdy. Much more so than the original plastic extruder that came with the printer, which the handle on snapped. This seems like it will be strong and last well.

This is a great upgrade to the plastic version that was supplied with my Voxelab Aquila (which snapped its lever). This is fully aluminium and comes with all the screws, etc, so no need to re-use anything. There are no instructions and so I suggest 1) watch the little video on the Amazon page and 2) take the old one apart as you assemble the new one so that you see where everything goes. You will need a set of small Allen keys (not supplied).

Firstly, it is not a boden tube connector. It is similar, but the two standard sizes of boden will not fit as it is a different size, and not threaded Instead, this is a clip in bit of plastic. It does the job, but not very well Secondly, the whole thing has a tendency to not work. The gear slips, no matter how loose or tight i had it. the bearing would just not spin. I followed 2 tutorials on youtube in case I was missing something. DO NOT waste your time/money on this one, go for the official metal creality part. I fitted the official one in under 10 minutes and it works straight away after an extruder calibration - this leads me to believe that this part is not up to standard and was not the way I had it fitted Again, do not bother with this one, it is only a few quid cheaper than the official (grey metal) version

Aus meiner Sicht ist das Creality 3D Drucker Extruder Kit für den Ender 3 v2 eine lohnenswerte Investition, um den ursprünglichen Plastikextruder des Druckers zu ersetzen. Der Plastikextruder kann mit der Zeit Verschleißerscheinungen aufweisen und zu Einschränkungen bei der Druckqualität führen. Das Extruder Kit von Creality bietet eine robuste Metallkonstruktion, die eine verbesserte Stabilität und Zuverlässigkeit gewährleistet. Durch den Einsatz eines Metallextruders wird die Belastbarkeit und Präzision beim Filamentvorschub verbessert, was zu einer insgesamt besseren Druckleistung führt. Die Installation des Kits ist in der Regel unkompliziert und erfordert nur grundlegende Kenntnisse. Es ist eine kostengünstige Möglichkeit, die Funktionalität des Ender 3 v2 zu verbessern, ohne den gesamten Drucker ersetzen zu müssen. Insgesamt ist das Creality 3D Drucker Extruder Kit für den Ender 3 v2 eine empfehlenswerte Option, um die Zuverlässigkeit und Leistungsfähigkeit Ihres Druckers zu verbessern, insbesondere wenn Sie bereits Probleme mit dem originalen Plastikextruder hatten.

Mon extrudeur d'origine en plastique a cassé, certainement par la chaleur émise par le moteur extrudeur sur lequel il est fixé. Je l'ai reçu très rapidement, installation très facile et re mise en fonction immédiate. parfait J'ajoute un commentaire car j'ai remplacer mon tube guide filament par du capricorn, et attention, l'extrudeur n'est pas fileté pour recevoir l'embout à tube, obligé de conserver le clip d'origine, et comme le capricorn est un peu plus gros que le PTFE, c'est vraiment pas simple à mettre... J'espère que ça va tenir dans le temps...

Calidad y precio

Prodotto come descritto, facile da montare

I used this extruder for a DIY project because it easily mounts on a NEMA 17 stepper motor. The construction is solid. I've had no slipping of the filament in the gears. I was skeptical of the new style PTFE tube connector but so far i have not had any problems. Assembly was easy and it seems to be pretty reliable for my application.