Muzata 6Pack 3.3FT/1M LED Channel Aluminum U Shape Silver LED Strip Diffuser Channel with Milky White Cover Easy Installation U1SW WW 1M

Used along with LED COB lighting strips to add under cabinet lighting in our kitchen. Needed to do for a long time and finally had the time and courage to tackle it. We were nervous at first with doing our own DIY setup instead but it seems that the options have come A LONG way in the past decade. Hubby watched a Youtube video of someone doing similar project and it seemed easy enough. Definitely more complicated than getting the pre-made kits, which I'm sure work great but were more expensive and less customizable.... Anyway, back to these tracks, hubby said he was surprised with how easy they cut - he even was able to use compound miter saw with normal blade he uses for woodworking. He attached the dampener to it prior to cutting to avoid having to cut the plastic dampener and the metal track separately. Used painters tape and cut slowly and it worked great - no issues with that. He also used the provided clips to attach the tracks to the cabinets. BE CAREFUL or you could go through the underside. He pre-drilled to just the right depth and had no issues with the install - no screws stripped or tore through the cabinet. You could (as others have recommended) use some double sided adhesive tape but he liked the idea of being able to remove easily in case the lights need repairing down the road - soldering upside down is NOOO FUN =) His only 'complaint' was that the little end caps that come with the system wouldn't work with our setup. Half of the caps come with a small (maybe 1/8 inch) hole to feed wires through and the other half are closed off. He had to drill larger holes due to using 18 gauge wires for a longer run and didn't want the possibility of voltage drop. We only needed 1 end piece after connecting all 6 of our lighting bays together. Definitely an 'our situation' problem and nothing against the product. They'd be great as-is if you're doing 6 separate bays and not connecting them.

These worked perfectly and were strait

I purchased these LED aluminum channels for a lighting project, and overall I'm happy with the results. They were easy to install, the diffuser cover helps soften the light nicely, and the finished look is much cleaner and more professional than using exposed LED strips. The reason I'm giving 4 stars instead of 5 is that the overall quality isn't quite what I expected. The aluminum feels a little thin, and some of the components don't feel as premium as higher-end channels I've used in the past. That said, once installed, they perform exactly as intended and look great. For the price, they offer good value and do a nice job of protecting and diffusing LED strips. If you're looking for a budget-friendly option that works well, these are a solid choice. Overall, the quality could be better, but they absolutely get the job done and produce a clean finished appearance.

Product works as advertised

I’ve been looking for these for a long time, finally found them, they’re perfect for LED strip lights if you want to hold a perfectly straight line and the plastic lens makes everything look neon

I don’t understand all the negative comments about installing the diffuser in the track. It easily snaps in by starting at one end then pressing it down bit by bit to the other end. You DO NOT slide the diffuser in the track; the fit is far too tight. Simply push one side in the groove on the track then snap the opposite side of the diffuser in with your thumb or fingers. Easy Peasy! The aluminum track, or channel, is very easy to trim to length with a hacksaw, Dremel or similar. The diffuser can be trimmed to length with a razor knife. The tracks come with 2 mounting clips per channel, which were very easy to install with a single tiny screw in each. One could easily substitute 3M foam LED mounting tape if preferred. Just be sure to clean the mounting surface with alcohol before mounting. The shape of the LEDs can still be seen thru the diffuser, but it is so much better than seeing the reflection of the bright LEDs without the diffusers. It may be that for the LEDs to not be very visible one would need LED strips with more LEDs located closer together. Fo example, instead of a 300 LED strip, try a 600. I am totally pleased with these and would buy them again. My wife loves them. They replaced halogen under-cabinet puck lights.

Two issues which affect this review: the plastic diffuser not fitting and the metal clamps not snapping into place. - At least for my batch, the plastic covers are impossible to snap into place. I've tried using my fingers, tapping with a hammer, and sliding them in from one side but the tolerances are just too tight. I can get one side in fine but the other is just being held with friction at this point, not flush or snapped in. - When you attach the metal hooks that screw into the wall and hang on to the aluminum channels, the screw head prevents the metal clamps from fully snapping into place on the channel. With no screw (not useful), the metal clamps click into place but with the screw they hang on by friction. In my case these two issues are not dealbreakers nor do they affect actual functionality of the led strips. However it is still a frustrating experience to setup and not something I would buy again.

Very good quality, especially for the price. Looks great and is easy to install. Will not completely hide the hot spots but will dull them to about half way, which was enough in my case. I was slightly worried reading the reviews about some difficulty pushing the diffuser into the metal bar but had no issues whatsoever. I assume people are having hard time if they don't align the diffuser properly or they push in one side at a time instead of snapping in both edges simultaneously, from one end to the other. Fairly easy to cut with some basic tools but make sure to smooth the edges as they get very sharp after cutting.

Does nothing to hide LED dots. Absolutely do not buy this product.

This is the worst defuser, you can clearly see the led dots. I don’t recommend

Had to replace all of the LED strip lighting under our kitchen cabinets. This Al channel made for a very nice upgrade to the installation. Product is of good quality; the aluminum has a very nice finish as does the translucent diffuser strip. Very easy to work with and install. Installation looks very professional. The light is much more even and nicely diffused compared to the bare strip that it replaced. Very happy with the result.

Excellent. À l'exception des minuscules vis cruciforme... devrait avoir tête carré pour faciliter installation.

Overall very happy with the product. Aluminum is well formed, easy to cut with a hack saw.. the end covers fit so so/ hit and miss if they are snug or loose. But not a deal breaker.. The plastic lens snaps on without an issue. Squeeze one end to get it started then push it right in.. The cover diffuses the LEDs but its better suited for more of a reflective then direct application, directly looking at the diffuser you will still see the LED shapes but when looking at the cast lighting on the surface it looks great, even when two inches away from a wall. (I used mine to do some back lighting of a mirror) Wish I had these when i was doing my under cabinet LED lighting. Overall happy with the product and the value.