Diablo Finish Saw Blade - 6" Diameter, 40 ATB, 1/2" Arbor, 12000 Max RPM | Ideal for Smooth Finish Crosscuts in Wood - TiCo Hi-Density Carbide, Thin Kerf, Non-stick Perma-Shield Coating - D0640X

I recently purchased the Diablo 8 1/4 inch 40 tooth finishing saw blade and I must say, I am extremely impressed with its performance. This saw blade has exceeded my expectations in terms of precision and smooth cuts. The 40 tooth design allows for clean and accurate finishes on a variety of materials, making it versatile for any project. Not only does the Diablo saw blade deliver exceptional results, but its durability is also noteworthy. I have used it extensively on multiple projects, and it has shown no signs of wear or dullness. The blade's high-quality construction ensures longevity, making it a worthwhile investment. Overall, I highly recommend the Diablo 8 1/4 inch 40 tooth finishing saw blade for any woodworking or construction enthusiast looking for reliable and precise cutting performance.

I'm a little bias, as I sell Diablo at a plumbing, heat and air store. I have a lot of customers who really like Diablo products and use them to make a living. I've been overhauling 2 decks on my house recently and really like the Diablo brand. Very good quality, long lasting and reasonable price. This is one brand I wouldn't have any problem recommending their products!

Worked great on my wormdrive. Listing was unclear if it had diamond knockout, but it does. Sliced through plywood without a problem.

(Edit: meant to add this BC-before covid Most important noted feature of this 6 1/2" blade for 20V saws is that the smoothness of the cut with least amount of friction aids in stabilizing the motor/base plate interface. I've found that ALL the cordless saws have flimsy tilt and cut depth components...the least bit of blade binding causes the blade torque to rack the metal frames...resulting in non-perpendicular cuts, run out from line of cut, strain on the motor & motor bearings, and reduced battery life as well. Long a fan of the Freud blades in Makita & Bosch work saws can't understand why I didn't buy the 6 1/2" blade earlier. Makes the cheapest saws run like butter, smoother cuts, quieter, less chipping, and above all less aggravation and time savings ...end edit) Last year I bought the Olshun 5 1/2" 36 tooth trim blade for my B&D 20Volt Max.saw. It worked fine for the fence slats and 2x framing but noisy. After reading the reviews of the Freud D0536X Diablo 5 3/8" 36 tooth blade I ordered one. The Diablo 10mm center mounted perfectly on the B&D arbor, though with the usual struggle. Test cuts on a 2x4 seasoned outside under cover were a surprise. With the blade at full extension only a few teeth showed past the depth of the 2x4, yet the blade cut smoothly, quietly, with no drag whatsoever. The Olshun blade though slightly larger had a bit of drag that was noticeable and was noisey. The Diablo cut is on the left...the surface is startling in it's smoothness, with only tiny whiskers along the surface of the cut. A quick stroke with a sanding block took care of those. On the right is the Olshun cut from the same piece of wood which was made last fall. It was one of the first cuts from the new Olshun blade. Same B&D battery at full charge was used for both free hand cuts. To me the Freud Diablo wins by a mile. Well worth the extra cost. When finished ends need to be exposed this is the go to blade for me. Time saved instead of hand finishing ends really adds up when 40 or 50 fence slats need to be cut. The light weight of the saw and the Diablo blade will make finish carpentry work of birch plywood much easier.

This Diablo blade is awesome. I have had 24 & 36 tooth blades on my circular saw and this 40 tooth blade, to me seems to the best bang for the buck ! Great combo blade. I can cross cut, I can rip cut and either way my cuts come out smoother. The kerf or thickness of the blade is also a little thinner than my older blades in the past. Plus the coating on the blade, together makes it seem like the saw does not strain so much. Just not as effort to saw through wood now.

Excellent product, works great

Cuts great, durable

Great blade, fits perfectly, rips through boards like butter. It’s also pretty sharp looking (get it… sharp…) One of my favorite brands for blades

Diablo! No more needs to be said.

I used to buy the Avanti brand at HD as I never thought about buying blades on Amazon. Oh wow, what a difference, you may be paying more for this blade, but the $15 blade from HD sucks, my last blade lasted 3 cuts and now it's all dull... Total waste of $. I needed to cut Melanie boards so yes they will dull your blade faster but come on, 3x ... Maybe 20 mins max worth of usage? Blah, buy this blade and forget the crap they have at HD, fun fact this size is NOT for sale at HD...just pure dumb luck I found it here... Grab it and you won't be disappointed.

Home building use.

Excelente calidad de construcción, cortes precisos, recomendable

Esta marca es sinónimo de calidad, uno compra sin dudar de su desempeño!!