Washer Shock Absorber Compatible with Samsung Washing Machines

Fit Samsung washer. Smoothed out washer and less noise as well. Six month later, still working well.

These are nice and they help keep things stable

Fixed the problem , relatively simple to install

I purchased these to fix the washer machine from banging into the side during the spin. I installed these to replace the ones that had rust on them. These actually made it worse. The ones installed had more shock absorbing characteristics while these Shock Absorbers all felt different tension with out any way of knowing if they were good or not. I do not recommend these to anyone unless you know for certain you have a broken Shock Absorber in which case these do not seem to function like the original be warned. I asked for amazon replacements when the original ones I received had greases everywhere and none of them had shock absorption like the ones installed. I dont normally leave reviews on Amazon that are negative.

Didn’t solve my problem but they still had resistance when tested by hand

These shock absorbers seemed to be an exact match for our 8 year old Samsung washing machine. The old worn out shocks were very easy to move and popped out of the body very easily. If you'd like to make the new shocks even firmer, I've seen that some people place metal hose clamps on the shock body to tighten up the dampening. I also replaced the spider arm assembly and both bearings to resolve the high speed spin cycle issue where the machine would repeatedly change from 9 minutes left to 13 minutes left. So far all of my effort and the expense seems to have been worth it. The washer is able to complete a high speed spin cycle for most loads. It still has an issue balancing a large load of towels or sheets. I'm confident we'll be able to get a few more years of life out of this 2015 Samsung washer. The model number of our machine is WF42H5200AP/A2.

So far so good. Changed all shocks while I had washer apart fixing a broken counter weight bolt Machine is spinning smoothly

First check spider with rotating drum. Second the upper springs. Third the weights on the front for broken bolts and loose weights. Fourth if you can push down on drum with little effort the shocks are bad. Would say anytime working on theses machines for any reason especially for shaking always replace shocks made cheaply by design and not very hard to replace. Remove upper cover and front and change all 4 without removing the rear panel if you have long arms and ratchet wrench. Also A for the front and B to the rear color coded also.

Worked perfectly I’ll recommend it.

My Samsung washing machine began increasing the drying cycle duration on its own, sometimes running the spin cycle for up to half an hour. After replacing the shock absorbers with these, the issue was resolved and did not return for over a year.

Seems to be good so far

Good fit

very nice