Inkbird Only Heating Thermostat Digital 10A 110V 1100W Heater Temperature Controller Plug Outlet Probe NTC Sensor ℉ ℃ Display C206 No Timer Function Greenhouse Reptile Brewing

I purchased 2 of these to control the CHE heat lamps in my hedgehogs cages. They were easy to set up and have been working perfectly for over a year. I have them set to keep my cages between 75-80 degrees F

Great thermostat. Works perfectly and simply.I wish it went lower than 50°, though.If it operated down to freezing it would be really nice.

I use this unit to control a dock de-icer bubble system. It's outside in the cold in a shed protected from the weather. Works perfectly so far, even in 18 deg F weather. A little learning curve to program but not to difficult. It does retain the program if it's unplugged and plugged back in.

Thermostat is good. Setup instructions are HORRIBLE . Hopefully this helps.hold the middle button for 3 sec to enter setup, and also hold to save setup. Set the time •24 hr only• . Temperature is either in C or F. It has 2 different temperature set times ( CT1 and CT2 ) . Each one you can set the temp - TS1 and TS2 - ( for example TS1 is 85 degrees at 8:00 am, TS2 is 80 degrees at 2100 - 9 pm. DS is the heating differential before it starts, so if it is set for 80 then heating won’t start till 78. Once it was set the thermostat worked good.

Straightforward product meeting all my needs for maintaining adequate heat on a tropical freshwater aquarium. It lacks the bells and whistles of some other options, but it does everything you need if your goal is to ensure your tank heater does not fail and cook your fish. I'll probably seal the probe in some tubing and silicone, but I like that it is detachable and replaceable if it breaks in the future.Pretty easy set-up out of the box. Display is intuitive. Only real complaint is that the minimum temperature difference is 1 deg. F. Why display the target temperature with a decimal? And the probe reads tenths of a degree. Just a little frustrating if you're maintaining the temperature of a liquid that dissipates heat rather slowly.Also be aware that there is a power button on the top of the unit. It's a little easy to accidentally toggle if you have it plugged into a power strip near a wall or furniture leg.

I use it to turn on my pool pump when the temperature drops below freezing. Works great. The two time intervals even let me set up a daily run schedule in addition, just set the second trigger temperature to a very high value. Would be nice if there were an outdoor version, too. This one needs to be protected from rain.

I have used these for three seasons now and value the quality and reliability of the controller. I have improved yield and reduced my time involved in seedling germination. I have also used these to turn fans and heaters on and off out necessity and have had no issues controlling a variety of electrical equipment based on temperature.

I love these things. They take a little work to calibrate, but they are very effective for things like reptile cages that need a high and low temp threshold for the heat lamp. Simply set the thresholds, plug in the heat lamp and rest easy the temp will stay within the specified range. Highly recommend.Revised 7/19: Sensors stopped working while I was away and it almost killed my Geckos. Cheap Chinese made junk. Avoid. Revising review from 5 stars to 1 star.

Inkbird Digital 110V, 1100W Only Heat Temperature Controller 10-42°C / 50-108°F with NTC Sensor, ℉ and ℃ Display c206This temperature controller is perfect for keeping Kombucha at the right temperature when brewing in a cooler climate. It is small and non obtrusive and was very easy to set the temperature. I've got it set up on a human heating pad and it works like a charm, no more worries if the temps drop at night, our brew is always around 77F. I've been using it for nearly a month without a glitch...Would highly recommend.

I was really happy with this device. It was easy to set up, use, and read. However, due to the need for a second heating fixture, I had to switch this for another Inkbird model with 2 outlets. I wish Inkbird made this wall unit with 2 outlets, as the other model (while reliable) has more cords to manage.

Works great and a great price, however, I find the thermometer probe is slow to adjust to the temperature. I would recommend using this in conjunction with a thermometer to make sure your habitat is not getting too hot or cold as the probe "catches up" with the changing temperature. To adjust for this, I have set the thermostat to a range of 24-25C for my hedgehog, and according to my external thermometer, it usually ends up being between 23-27C before the lamp will turn off or kick in. Still works great for my little guy!

Already loving this; I'm using it to control the heat mat for my leopard gecko. The instructions aren't grammatically correct so it took a bit of time to work out how I was supposed to set it up, but it turns out it's pretty simple. The probe is very helpful and has a nice long cord. It's been keeping the temp exactly where I want it so I have a happy lizard! Plus it shipped to me literally overnight even though I selected standard shipping, so that was a bonus!

Used for an incubator. Worked well for a month then stopped working and now incubator has overheated and chances are pretty good that 90 unhatched chicks will remain unhatched. Quite disapointed.