weideer 6 inch RV Vent Fan Blade with 12V RV Vent Motor D-Shaft Replacement RV Bathroom Vent Fan Motor with 2 Screws 2 Zip Ties and Switch K-037-X-FSZK

Quality product.Installed in a 2009 Cross Roads Cruiser 5th wheel travel trailer.Removed trim ring and screen to access fan and wiring. All work could be performed inside the trailer. Removed wire nut from fan/fan switch and threw it in the garbage. Removed fan blade, removed screws retaining fan motor and removed switch. Cut white wire leaving sufficient length for new fan installation.Removed the components and compared to new. Everything looked close.Great time to clean plastic trim piece and screen while removed.New Fan fit perfectly with screw holes alignment.Switch hole in plastic screen assy required a little adjustment. I enlarged the hole and pulled it away from the edge so the retaining nut would fit without obstruction. I used a butane soldering iron to modify the hole until a perfect fitment.I used automotive waterproof butt connectors ensuring a permanent wire splices.Secured fan wires using supplied wire ties.Pay attention to fan blade installation ensuring fan blows air outside. Blade has instructions written on it.Performed operational check of the new fan before screen and frame reinstalled.Reinstalled plastic screen and trim frame assy with extreme care not over tightening screws. Older plastic interior pieces are very brittle and fragile.Whole process took maybe an hour and that included chasing required tools.#1 Phillips screw driverWire cuttersWire crimpersMeans to modify switch hole if needed.I found reading the reviews, my vintage rv fan fitment was nearly identical. It worked well for me.Fan works so much better than original. Quieter than original. Moves a lot more air. Very happy with product

Easy to install, and very strong, keeps our camper bathroom nice and dry!

works well and is slightly larger then the original factory one so i had to drill new mounting holes but other then that it installed easily and works as expected

Exact replacement for fan in an old 04 hybrid camper bathroom fan. This one moves more air, had more blades in the fan and spins faster, or the old one was just so wore out it slowed down. Either way, this includes everything needed except for some butt connectors.

Came with everything I needed to replace the one that stopped working... Easy install, only difference was this comes with a push button on and off switch. The one that broke had a toggle switch. Don't forget to mount the fan the correct way. I was thinking about buying one that that could go in reverse. The price was much more then I wanted to pay. The one disappointment is the fan motor is quite loud. Wish it was quieter hard to hear when sitting on the throne.

Motor worked ok but fan blade did not clear between the motor mount and screen. Maybe because flat on motor didn't go completely up the shaft and I cracked the blade trying to push up farther. Switch wires were also too short for my setup. Replaced fan blade and added wire now it works great.

Rather than spend $25 on a replacement Ventline fan motor for my 2019 Forest River, I was hoping this would suffice. The Weideer Motor is slightly larger, but fits fine. This fan is louder, ‘cause it’s more powerful, which we like! BUT, I had to modify the Mount: opening center Hole to .515” and adding/moving 2 screw Holes.(as the bolt Spacing is 1.0" on the Weideer). ONLY buy as Ventline replacement if you have a Drill, Dremel tool, drill Bit set, and are willing to work overhead for about an hour. Otherwise a very nice replacement.

Easy install. Perfect replacement for my 5th wheel. Works great. Came as described

Replaced with this new fan & it works well.

Did not fit like the old one,had to do some modifications, the motor is bigger

Exactement ce que j'avais besoin. Identique à celui d'origine. Fonctionne très bien. Livraison rapide.

replaced the old one that was in my 2015 avenger fit perfectly quick 15 minute job!

Had to drill new mounting holes in frame to accommodate.