3D Printer Enclosure

Very good. I have my A1 and the AMS in this for ABS printing. Keeps the ambient temperature at around 38C (with the bed at 100C) to minimise warping when printing large ABS parts.Definitely reduces the ABS fumes too. There is a fan port on the side (need to get your own fan) to vent externally if required..Really pleased with it. Not the start of thing you'd stand upon but sturdy enough if treated with care.

A nice enclosure and my A1 with AMS fits nicely. Was a bit daunting to look at fir assembly, but went together easily.The fixtures for the poles are a tight fit so have a sturdy surface. Also make sure to have plenty of space.When printing it does well to hold the PLA smell in and seems to hold the temperature well.I haven't used the supplied light bar, as my overhead lights in my room do a good job.Be aware that it isn't load bearingHappy with my purchase

Only issue is that the external vent only allows an 80mm fan attachment, I've modified to 140mm which allows more airflow and quieter fan.

Very good at the price point, but sadly returned it as the printer I wanted to use it for was faulty and so returned. Otherwise, the case would have been ideal. Well made, strong and windows were transparent. If I bought another similar printer, this case would be reordered.

Great product. I keep my 3D printers in the loft where it’s cold and breezy, and without an enclosure my prints were really struggling. As soon as I put my printer in this cover, the quality improved straight away. I also keep desiccant inside, which helps keep moisture down, and once the printer warms up the enclosure retains the heat perfectly — exactly what you want for consistent prints.It was simple enough to assemble. One plastic piece did crack, but that was more due to me putting too much pressure on it than any issue with the material, so just take your time. Otherwise it’s sturdy and well-designed.I’m so pleased with it I bought a second one for my other printer. Easily one of the best-priced enclosures on Amazon, and it performs brilliantly. Highly recommended.

Looks smart. Easy to assemble. Fits both A1 & AMS perfectly with gap as advised between,

Great solid cover for my Phrozen Sonic Mini 8k. Stops UV reaching the machine, whilst also helping to act to block some odour when dormant. This is less apparent when the resin is warmed up and the printer is operating, though this isn't the principal purpose of the cover.

The title says for Bambu A1 combo, but the space inside the cover does not provide the space that the printer manual says is required.The product was a nice quality with a good light.

Cette protection pour ma creality Halot Lite (grand format.) Très robuste (toile noir épaisse doublé a l'intérieur de mylar épais martelé), ajustement parfait protégeant jusqu'en dessous de l’écran tactile le protégeant bien, s'enfile comme un gant pour protéger mon imprimante. Je recommande vivement pour la durée de vie de votre imprimante, vous pouvez foncer les yeux fermée.je viens de découvrir une chose étonnante pour ne pas dire chiante concernant les résines à l'eau. Vous qui utilisez ce type de résine en alternant (nettoyage parfait entre les 2) lavable à l'eau et alcool, ne galérez vous pas à nettoyer, bac, FEP. De plus vivant dans le sur, le fait de sortir a l'extérieur en plein soleil durçi en quelques secondes les résidus de résine. Merci une fois de plus à cette housse qui en plus du capot orange fait normalement pour stopper 99,9% des UV vous procure un noir parfait lors des impression, j'adore. Par contre les résine à l'eau, hors de ma vue horrible chose, je reste a la bonne vieille résine ABS, et autres lavable à l'alcool ou alors il faudrait racheter un support de pièce, un bac et surtout utiliser 1 ensemble pour les résines à l'eau, et l'autre pour l'alcool au risque de comme celà m'arrive depuis des semaines de dois changer 6 fois le FEP a 20€ le bout et de plus introuvable sur Amazon ou chez d'autres marchand, je les trouve à l'unité à 19,90 chez dental. juste un petit coup de gueule. Bonne vacances prenez soin de vous

Das Gehäuse ist wirklich einfach zu montieren. Der Bambulab A1 mit AMS Lite passt problemlos hinein. Top!

This is not fit for purpose, for the Bambu labs a1, it does not have the clearance front and back of the bed, the cable rubs at the back and the bed rubs at the front. It needs to be wider. Don’t buy.

Bought this to keep the dust off since I have 2 dogs and it’s very difficult to keep the hair off of the machine no matter how much I clean. The cover isn’t very thick. But the inside of the cover has a layer of aluminum. I guess it would work to keep the heat in the machine. But to me it doesn’t matter. It’s perfect for my needs. And also it’s thick enough to keep any uv Light out.

This thing just does what it promisses.I also leave it on while pre-heating as it insulates .It fits perfectly on a Anycubic Photon Mono M5s Pro (so it should also fit perfectly on the M5 and M5S).