Thermalright AXP90-X47 Full Cooper Low Profile CPU Cooler, with 92mm TL-9015R Slim PWM Fan ITX CPU Cooler, AGHP Technology, 47mm Height,for AMD AM4 AM5/Intel 1700/1150/1151/1200/1851(AXP90 X47 Full)

Keeps my i5 12500T nice and cool. Even while under load, I don't even hear it and it works like a champ. Great value for the cost, would buy again. Also looks really pretty, might consider using a similar fan for a steampunk build.

Absolutely adore this cooler, fits my ultra compact 5090 build and keeps up no problem.

Excellent. Easy install. Great for SFF nas case.

The cooler keeps temperatures down great for my Ryzen 5 7600X but the instruction manual was extremely confusing to setup with an ASROCK B650I lightning motherboard. It said you had to use their backplate ALONG WITH the motherboard's stock backplate but it didn't work. I ended up just using the motherboard backplate after trying for a few hours.

Crazy to think that a cpu cooler this small and this inexpensive can manage to cool latest generation cpus. I was skeptical, but I’m a believer now! Full copper is truly capable. If you’ve got to air cool your cpu in an sff case, this is the go to cpu cooler. Swapping out the oem fan with a 92mm noctua slim yields a better sound profile, but ultimately, I don’t think it’s worth the cost to upgrade sound vs fan speed over the thermalright fan. This effectively cools my 7800x3d, which is already an efficient chip, and at gaming loads it hovers around 75c in a dan a4-h2o and fractal terra, but I’ve since adjusted its negative curve to -24 for all cores, yielding better temps down to 65-70c. Don’t be discouraged when you open the packing and see that the soldering on the base plate is imperfect, apparently that’s normal and within spec of quality. The mounting system could be redesigned so it’s simpler, but I managed to figure it out with little to no instructions on how to do it, ie. use the intel screws so that you could use the oem am5 backplate.

So I bought this to move my current build into a sff case. I start taking my pc apart to move the parts over to the new mobo . I get the cpu swapped over, then begin to read the instructions for this cooler and begin assembly only to notice they only included 3 out of the 4 necessary b4 mounting screws. Now I gotta reassemble the old case and wait for a replacement then disassemble it all over again. You’ve screwed me thermalright.

This is a great little cooler for its size . It works very well in the Asrock DeskMeet with a ryzen 7 3700x . Chip runs in the Mid 40C to upper 50C under most loads it will get up into the 60c range when playing Games and hits low 70c range during a multi core Cinebench run but cools down very fast even with the limited air flow of the case design. It will run cooler with more airflow using a be quiet Fan with an itx PSU for fan clearance then the factory fan it comes with . Keep in mind using this cooler with the hotter CPUs in a small form factor case you will not get anywhere near what a full size cooling solution is capable of but it’s a good bolt on compromise for people that like to tinker with ITX computer builds. If you have the room in your build for a bigger cooler don’t use this one, go with the largest one that you can get to fit but if space is a problem this is one of the better ITX solutions for the price

5/5* Thanks!

Bought this for the fractal terra case alongside the ryzen 5700x, under full load it can keep it under 80c

I too had to use pliers to remove one of the hex nut, just like other user. It comes with poorly designed back plate and stanoff for AM4 motherboard. Also 4x standoff with rubber rings are not touching the motherboard as a stopper.That's why when you tighten the backplate screws AM4 motherboard bends with it. ( Some users also reported the exact same problem ). I might return the product.

Paid for a new one but got a clearly used one. Screws are missing and there is clearly thermal paste remaining on the unit. Disappointed.

So if you can only fit a 47mm cooler into your AM4 system then the full copper version is the best performing cooler I have found by far, but it does have some issues. 1. It is not a cheep cooler, and for the price the build quality is not as good as the much cheaper and thinner Noctua. 2. The fan is unnecessary loud, I used the Noctua fan that came with my previous cooler, which is much quieter and has no noticeable loss in performance. 3. Mounting the cooler is a bit of a pain. It takes some juggling to get the mounting pressure firm enough for best cooling without bending the motherboard like a banana. However in my ultra thin micro ATX case that sits under my TV this cooler is worth about 100 points in cinnebench over the Noctua due to reduced thermal throttling.

The cooler was missing and the thermal paste was fully used, empty in the box.