General Pump 100651 DuraView Inlet Filter Integrated Garden Hose Nut, 8.0 GPM, 150 Maximum psi

Fits my pressure washer and works well. I highly recommend.

Quality filter. Easy installation.

Exact fit

nicely built, perfect spot-on replacement.

A little overpriced but great quality and function. Leaked a little at first so I switched out the rubber washer and it works great now. Looks great and should last a while , easy to install and use.

Hole in product. Not able to use.

Needed a good inline filter for the garden hose feeding my pressure washer, and I wasn’t interested in those plastic ones. Pros: -Strong all metal filter with a nice design to it. I was worried both ends connected together using the plastic, but from my images you can see it has a rigid metal threaded internal connection. -Allows for attaching 1/4” pressure gauge if desired. Cons: -For a filter that’s designed to be frequently opened and cleaned of trapped debris, the o-ring is a very tight fit and probably won’t last long based on how much compression is required to seal this filter. You can see how it’s squished down pretty hard through the plastic housing. Not to mention it was already stuck to the plastic upon arrival from the visible green color transfer. They also failed to include 1-2 extra o-rings for the filter. For $25 they should’ve included a few. -They failed to include a second 1/4” plug, so this filter is absolutely useless out of the box. These plugs are ultra cheap, there’s no reason not to include it for $25. -Threads for BOTH the 1/4” and 1/2” NPT are not machined to industry standards. These would’ve failed quality inspection at my machine shop. I could barely get a 1/4” plug into it. Only went in about 3 thread of the 6 threads. Their own factory plug doesn’t fully seat either. For the 1/2” NPT to 3/4” GHT adapter I purchased, you can see from my images it will only turn down about 3 of the 7 threads after working it fairly well and removing any burrs. The adapter threads are to spec, I checked with a plug gauge we get 3rd party verified/calibrated for ISO certification. Both threads might hold fine with thread tape since this is a low pressure application, if not I’ll have to return it. Other thoughts: This was described as an “inlet filter” rather than an in-line hose filter, so I don’t expect it to come with the 1/2” to 3/4” GHT adapter. Not including the 1/4” plug however renders it useless. The seller should’ve included a better description and more info so a customer can order these plugs and adapters at the same time they’re ordering the filter. -I would’ve happily paid another $5 if it came with 5 spare o-rings, 1 spare metal filter screen, and a secondary 1/4” NPT plug for thw other port they left open. I spent that much in gas going to purchase one locally.

Works perfect!