Keyboard Mouse Adapter for PS5, Adapter Connect XIM Apex&XIM Nexus&Cronus Zen&ReaSnow S1&Titan Two&CronusMax to Enjoy Various Official FPS and TPS PS5 Game.

Like others, I had a tough time getting the Beloader up and running. So hopefully some tips here will help those who haven't gotten theirs to work yet.1. Make sure the router login is for your 2.4GHZ WIFI. I dug into my router software and noticed that it auto-selected 2.4ghz or 5ghz depending on the device. It was trying to connect the Beloader on the 5ghz WiFi. I turned that router feature off, and ended up with two access points... ROUTERxxx-5GHZ and ROUTERxxx-2.4ghz. I could enter the specific 2.4ghz access point and log in with my password.2. Double check that the Remote Play function of your PS5 actually works on your network. Connect it to a PC or other device to check that it works.3. For your PSN ID, this is a little trickier. What ended up working for me was logging out of EVERY Sony device I had (for me it was a PS3, PS4, and Vita). Once I did that, I logged out of my PS5 and logged back in. At that point, I entered my credentials into the Beloader and the PSN ID generated was different. I finished the setup and it connected immediately with no issues.4. Plug your peripherals into the Beloader before connecting it to the PS5. When I plugged my XIM into the Beloader while it was plugged in and solid green, it started flashing green and red again. I unplugged both, connected them together and re-plugged them, and the XIM connected instantly.4a. Similar to the above step, make sure your PS5 Dualsense is COMPLETELY OFF before plugging it into your device. The Dualsense messes with Remote Play in some weird ways. It should also always be wired when using it with the Beloader.Hopefully these tips will get some of your Beloader devices working. Once I got it connected, my XIM functioned normally, the same way it did on PS4. Which, as you may know, does NOT replicate M&K movement on your console, but it does allow you to use your mouse and keyboard with PS5 games that don't support it.

This item does NOT work for me as well as a lot of people who are trying to use XIM / Cronus / Titan adapters. They do not provide proper guides or show how it needs to be hooked up with what device. ( They only show you how to program the device to Remote play witch is useless as you have to show us on how to hook up the adapters and properly conifer them. There is no support. No forum. No phone number. I cant find any guide on how to use it with any adapter. Its not plug and play. Very difficult to get working. There is no videos of them using using DS5 controller + adapters!. I will be returning the item if the seller doesnt fix the issues.

I have Xim Apex and Reasnow so I’m pretty good at setting these things up.Initially I could not get the remote play to work or anything with the BeLoader. Eventually, I ordered a 5V 3A power supply which did the trick for me. I got remote play up and running.Next, I was able to get this device FULLY WORKING with remote play over WIFi. I was really happy to have BeLoader working.The issue is the latency. You can forget about playing Apex Legends or COD using the WiFi method. Even the aim assist was changing in game due to the latency.Next, I figured I would go for the wired method over LAN, so I picked up a wired USB + RJ45 adapter.I updated the BeLoader firmware using the LAN firmware. I most definitely could connect to remote play. However, I was not able to authenticate with Xim or Reasnow using the wired method.I figured out my issue. I had a PS5 controller cable issue. I’m updating my review to 3 stars.I finally got it working due to my own troubleshooting and asking other users. Product support could be improved.

Works great for my setup; that being XIM Apex with Logitech G13 Gaming Keyboard and Logitech G700S mouse connected to the Beloader. G13 is hard-wired and G700S is wireless. I did have to add a 5volt 4amp power adapter to provide enough power to run all of the components. Setup was pretty easy following just the written instructions. No noticeable lag (of course this is going to be different for everyone depending on their in-house network setup and also power to the components). Once hooked up and connected via Remote Play you're good to go as it retains your login information so that all you have to do is unplug it when your done and plug it back in when you want to use it (or just use a powered USB 2.0 hub with switches to "turn off and on" as I am doing. I have played up to 5 hour gaming sessions without any disconnects. Two key things to remember are that one, you must supply additional power and two, just follow the written steps here or you can go to the Beloader website as they have instructions there as well to get the Remote Play going. I hope this review was helpful. I HATE THE PS5 or any Playstation controllers for that matter and right now this is the only alternative... game on! ⌨🖱

At the beginning it’s a little cumbersome to setup, but once it’s done it works well. This is the only solution that I found to use my keyboard and mouse with the PS5. I would give 4 starts for how cumbersome it’s to setup, but since it’s the only solution and it works well, 5 starts it is.

Tried setting it up, but everything I have done doesn't work. From both pc and ps5 on wifi, or one wired. Settings for this device are set correctly via the instructions and videos and still won't work. There's multiple people with this same issue on the youtube video as well mentioning it. It might help if we were able to use the software to connect to our wifi network for the device through a list of wifi networks to see and connect to. That might be the issue but I tried several ways and and nothing.

just stops working, out of nowhere, for me, and everybody else i know with one.

Product does not work. Simple as that.

EL producto funciona pero debes complementarlo con mas accesorios para hacerlo funcionar, en este caso es conectarlo por cable, NUNCA por WIFI porque genera retraso, para conectarlo por cable debes actualizar el firmware y utilizar un modulo de red a USB con chiptset RTL8153 (recomendable) y tener una fuente de energia extra.