VEVOR Precision Miter Gauge, 24" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale

I gave this tool five stars because of it's overall quality. That said, there were some issues. I apparently purchased this as a returned item, not my intention, but my fault. Because of this there were minor parts missing. Specifically the two screws and nuts that hold the tee slot extrusion to the miter sled. Not a deal breaker. If you purchase this item, look closely at the packaging foam. Under the slide that goes into the table saw slot there is a small door which holds the blue push handle. It is light weight and could be overlooked causing some to think it was not included. I found fit and finish to be very good and the slide is adjustable for the miter slot of your table saw. This adjustment is OK but could be better; the plastic washers which adjust the slide in the table saw slot are very soft and tightening the screw causes them to push out and bind. I have a Grizzly table saw and found the adjustment to be too tight with the washer in place and too loose with them removed, My solution was to grind a taper on one side 180 degrees around from .05 inch off to 0 inches off on all fiber washers; creating an eccentric which allows me to rotate the washer till snug and then tighten down. I also had to shim the aluminum guide disc on handle end of the slide by .0030 to keep it from hitting the underside of the table slot. I find this tool to be much more robust than others at twice the price and out of the box accuracy is very good. You will need to make some minor adjustments to the fit your need before using, however I find this to be well worth the effort to have this tool. I would recommend that you use 1.25 inch T slot bolts and hand wheel nuts to hold the T slot extrusion to the miter. This will allow you to quickly adjust the extrusion right or left based your needs. I recommend this tool and feel that it was a good purchase. I hope this helps.

First initial impression: "WOW! this is a high-quality item!"Second impression: "WOW! this thing is uniquely well-packed!" (Those who say they are missing the large blue knob.... it's there well buried beneath the foam packing hidden - hence the label "peel-a-boo" on the packaging)Third impression: "WOW! the reviews were right! There are no real assembly instructions!" But I had pre-expected that and simply looked at the pictures from the Amazon listing to decipher what went to what. pretty straight forward.Fourth impression: "WOW! This is a nice quality item and well-worth it!" Yes, it is indeed a nice quality item. solid, square, well-built, laser-etched markings, quality components.Fifth impression: "WOW! lots of adjustment screws to fine tweak it" (I have an older Delta Unisaw. The miter gauge didn't initially fit the slot in the saw. But I simply removed the front 'washer' and rear 'washer' (note: several hex wrenches are included, but not a small one for these). Then the gauge slid nice and smooth.Sixth impression: "WHAT @#!# !! How am I supposed to use this???" (1) It is clearly designed for use on the RIGHT side of the saw indicated from the measuring markings etched on the gauge. The ' ​Additional trim blocks raises working efficiency" phrase in the item description make you wonder what they are talking about. I cannot (still) figure how to even use this adjustable block. It appears to have a marker indicator to line up with the etched measurements on the miter gauge, but this in no way lines up with the flip stop for measurements! Therefore, one cannot really use the flip stop with the measurement markings. The only resolute appears to purchase a left-to-right adhesive measuring tape to adhere to the beautiful laser-etched measurements on the gauge - then adjust the tape prior to sticking it down to line up with the adjustable stop block from the saw blade to allow it to work on the left side of the saw (or even the right side for that matter.Seventh Impression: "WOW! What a great looking product..... if only it was truly functionable!"(just passing this along for those who are considering this.)

Very good product for the price. A little bit of instruction would’ve been helpful but I’m not the brightest and had it assembled and ready to use in 10 minutes. I second the review who said to use T slot nuts and knobs to attach the fence to the miter gauge. Makes for much easier relocating of the fence along that axis. Product is sturdy and well-made and around a third of the price of its premium counterparts. The stop is a tad vexing at first but play around and you’ll get it. I don’t know how some folks find the time for 700 word reviews to complain about something they knew came sans instructions, once again at a third the price of others, but can’t take 10 minutes and play with something and figure it out lol. Anyway it’s a good product for what it is and a good addition to my collection of tools I probably don’t need but won’t regret buying

Item doesn't fit miter slot for a craftsman 113, very close but won't slide in

After putting it together the first test cut was perfectly square. Will make accurate and repetitive cuts easy

Bought this as a Christmas present for myself. Finally got the time to assembly it. Disappointed! The assembly instruction are totally useless. If you purchase, use the Amazon advertisement page and then through trial and error you can assembly it. The quality of the material appears to be quite sturdy. As you see from my photos, The opening on my table saw (which I feel is pretty standard) is .012 inches whereas their guide bar is .748 inches. Way too big for the table saw opening by at least a 1/4 inch. I sent them a note which they promptly answered asking for more details. I provided them the same information I am sharing on Amazon. Unless they have a smaller guide bar, you are basically screwed.

Just put it together and wow, I’m impressed. I held off purchasing an incramiter, kreg, or rockler set due to the price. This feels like it’s built very well, and comes with a 24” adjustable fence, stop block with fine tuning, and easy to read measurements.“THE BLUE KNOB/HANDLE is on the bottom of the styrofoam! 😆.If you are thinking about upgrading your stock table saw gauge, get this bad boy out befor they raise the price.

BUENAS NOCHES.es una herramienta muy presisa y bien hecha, tambien llego muy rapido y muy bien empaquetada, felicidades al vendedor.

This item was exactly as shown and in perfect condition when received. Very happy with the quality.Note to SawStop users: This has a good possibility of triggering the flesh sensor so needs the saw needs to be run in bypass mode to use as is with fence next to blade for measuring (forgot about the flesh sensor when purchasing this). I don't like turning off the safetys but am so happy with how well it works that I am just going to 3d print a short extension to the fence so the metal never comes close to the blade.With the sawstop tracks it does take some very fine micro adjusting to get it to run smoothly without the track wheels coming off the end of the screws.Instructions could be better. Probably not a problem if you are an old hand using this kind of accessory but if you are a first timer with this kind of thing, printing a picture of this item and taking it to the saw with your will save a bit of time :D

La qualité n'est pas à la hauteur de la description du produit. De plus les gravures ne sont pas consistantes sur le rail pour les mesures. Il y a un mélange entre les conventions anglo-saxones (pouces) et le système métrique. De plus une des gravures est à l'enversSur la jauge angulaire qui est argentée, les gravures sont illisibles.Pour le problèmes des échelles de mesure, j'ai utilisé des bandes autocollante en métal pour corriger le problèmes. Pour la partie rapporteur, j'ai utilisé de l'époxy noire pour rendre les graduations visibles.Il manquait aussi un écrou pour assembler la partie pivotante du rapporteur d'angle.Globalement, je ne recommande pas ce produit que j'ai gardé car j'avais absolument besoin de terminer l'équipement de mon atelier.

Einfache Montage und sehr genau !

Once you get your head round the adjustment. It works well. But you will have to take the time and effort too get it to run right. Not perfect straight out of the box. All in all. I’m happy with my purchase.