KKoneAuto Hitch Receiver and Bezel Class IV Compatible with 2011-2020 Grand Cherokee Trailer Tow Hitch Receiver 2 Packages Replacement for Part #82212180AD # 82212180AC

It fit tighter than a glove and I had to use more than elbow grease to to get it into the correct position. Once it was in, it fit tighter than my prom dates dress and looks just as good on my car as the dress did on her.I have yet to tow anything yet since the Dealership has to turn the lighting kit on. So, we'll see how it tows later. Otherwise, great product and I recommend ordering from this Seller.

The hitch frame was too wide. I took a mallet and hammered it in order for it to slide into the frame. Fortunately I got it to fit. But only 3 out of 4 bolts fit on each side. I believe it will be fine. I think it's a decent hitch kit

Originally, I had installed the drawtite aftermarket towing receiver. It became quickly apparent that it was too low to haul some heavier trailers. This tow bumper replaces the factory origanal bumper and requires removing the entire bumper cover and cutting out a portion of it to accommodate the bezel included in this kit. It took 2 of us about 3.5 hours to complete. It raises the receiver about 7" higher than the under bumper hitch. I'd say, having installed this about 3 months ago and having used it several times since, well worth it.

Hitch was slightly bent and required some “finess” to get it to fit. After installing it I noticed that the 2 inch square for the receiver is not welded straight. I’m only using it to tow a small trailer so I kept it but would t recommend it if your towing a heavy trailer.

the fit was very good, was easy to install. the only problem was when we went to tighten the bolts the washers would not hold and could not allow the proper tighten level.

The hitch seems sturdy enough, but the nuts that are welded in are misaligned or the threads are messed up. 2 of the 8 bolts will not even go into the hitch. I have to buy a tap to get them mounted.Two other holes in the hitch that take 6mm bolts weren’t even threaded and I had to tap them to finish the install.It took twice as long as it should have to mount the hitch due to the threading issues.

Good for the money. You get what you pay for. Functions as it should.

At first I was skeptical about this hitch. But I was impressed with what I received. It was a little tight putting it on but using a dead blow hammer fixed the issue. Came with hardware, even tho I preferred to use the factory bolts. Seems to be very well built with thick steal. Best of all when complete it looks factory!