STAR BRITE 87764 Ultimate Aluminum Cleaner & Restorer - Safely Clean Pontoon Boats, Jon Boats & Canoes, 64 oz.

This was AMAZING cleaning the pontoons on our boat. Spray on, wait a few minutes and hose off. We are beyond thrilled at how well this worked.

Works grate on aluminum. Use only in open area. , cleans aluminum for painting if needs painting . Gratefor the price . Will buy again as needed .

Worked good. Had to do a lot of scrubbing to get it clean but it worked. Thought it would be easier from what the description said

This stuff is Awesome and amazing! I used it on my project boat I just got and what a difference! Very little elbow grease and it’s almost like new! I highly recommend this product for anyone with an aluminum boat

I used mainly on my pontoon and it really takes the water staining off the toons. It is important to follow the directions so you get an even looking aluminum surface.

I bought this for a DIY project to clean the white aluminum siding stains off the brick on the front of my house. It didn’t work on the brick, but to be fair, it worked great on the aluminum siding. I tested a small area and it came out really clean, so once the weather improves, I’ll use it on the second floor siding and shutters, the only spots with aluminum.

While the chemical works at brightening aluminum, the spray attachment broke after squeezing the handle 3 times. Very disappointed as others have mentioned

I have an older Mack truck with an aluminum diamond plate fuel tank and Al deck between the frame rails. It probably hadn’t seen anything but a pressure washer in 20 years since it had been restored by the prior owner. I tried several wipe/rub and buffer applied cleaner/polishes. The raised diamond made it real difficult, and could never get it clean right along the raised area of the diamonds. There had to be something better. Found this, and gave it a try on the fuel tank first. Even being 30-40 yo aluminum, and having just used the buffer cleaner / polish, I sprayed this on, rubbed it slightly with a scotch pad to make sure it was fully in contact with the surface. Waited 3-5 minutes and washed it off. Huge improvement even from buffer/bar polisher. Figured I’d try the flat diamond plate over the frame. Sprayed it, scotch pad wipe, wait, and hosed it off. WOW ! It looked like new shiny aluminum plate. The 2 trailer wheel pics show before and after, with only 15 minutes of time spent between spraying the fluid, wiping with a scotch pad, to hosing it off. Seriously impressed, and I hadn’t applied the aluminum polish yet. It’s expensive, but it only took a few minutes vs using a buffer/bar cleaner that I had already spent well over an hour on the diamond plate.

Used this to clean some lower aluminum control arms for a collector car. They came out looking better than new. Nice and shiny, Removed all corrosion and left a brilliant finish. Some light scrubbing was needed on a few spots, other wise spray let sit 5 mins and pressure washed off. Would recommend and will buy again.

Love it when a product works as advertised. The oxidation on our boat was getting really bad. I was leery about a product that would work but this one definitely exceeded expectations. Given how bad this was on our boat, I applied a first coat, dabbed it with a large sponge to avoid dripping) let it sit for about 5 mins and then used a soft scouring sponge to scrub the deeply affected areas. I reapplied (dabbed with the sponge again) and let sit for another 5 mins or so. The results, as you can see in the picture, were great. Couldn’t be happier with the product, highly recommend. Key here is to be patient, take the time needed to let the product do the work.

Took a bit to get the hang of how to spray it without dripping stains. Works well. Took off years from our horse trailer. Make sure you wear gloves, it burns your hands

The product works great. Unfortunately, we lost about 30% due to a leak in the container which was not shipping damage. The spill was contained in the plastic bag. Clearly left the manufacturer with the leak. Marshall

Used on an aluminum boat to get 3 years worth of grime off. Spray it on and wait a couple minutes and then agitate with a brush. then blast it off with a hose or a pressure washer. All I got to say is wow just wow. I would caution the use around galvanized trailers it will start to eat through it quickly. Spraying things down prior helps but covering sensitive metals is the ideal thing to do