VViViD Clear Paint Protection Bulk Vinyl Wrap Film Including 3M Squeegee and Black Felt Applicator (17.9 Inch x 54 Inch)

Product as described. Easy application, very versatile, durable material, and great value for the money. Placed on my headlights, taillights, and door handle cups for protection. Will buy this product again.

Must use heat gun with this

This is not suitable for outdoor use, not suitable for vehicles, according to vivvid own tech support " the product should not be left out in the sun" , this is not a joke. I am now having to repaint after an impossible removal of a clear product that within 2 years turned black and cracked into small pieces so it could not be removed by peeling. According to analysis it might be a PVC based product which will gas out once installed and change into a useless garbage, on my lights and license places it turned yellow , on painted car it turned black. I a, horrified by how bad this is, and the kicker is I bought a lot of it, and used it on more than one car and anything else I thought I was protecting. There might be some use inside away from UV light for this. Otherwise, please do not use this on your car or truck, it is not a 3M product, it is junk. It is a horrible value. My cost to repair all the damage is beyond what I could have just paid a shop to do. I will post pictures, it is a nightmare. And my review is not the only one telling you this exact story.

Bought this to wrap the top of a new tool box to keep scratches away. I didn't do the best job since its a tool box and its staying in my garage but I appreciate not scratching the paint off after using it as a table for the first time, can always peel it off and have fresh paint underneath after some work with goo-gone. The application kit included..... Yeah, I threw it in the trash and settled on using a squeegee that I used to install tint. If you plan on applying this PPF to a vehicle then Id suggest getting a good installation kit.

Much to The Spousal Unit's pleasure I finally replaced our washer/dryer combo, purchased in 1990 and kept running all these decades by me. I had noticed that the paint on the top of the washer and dryer had been ground down to metal in places over the years, due to grit being picked up by laundry baskets. Decided to put this clear PPF on the top of both new units, covering any part that could be hit often by the baskets. Only time will tell but I'm pretty sure this will go a long way toward maintaining the equipment appearance. Cheers!

Ok let me so it’s not bad but I feel it’s too thick and requires heat a lot of it doing a tank on a bike. About 5-7 days with it on the bike it help up good. But as soon as we got near 100 in temps the whole think started to look like your grandparents skin. Yep. Wrinkles everywhere. Pulled it off used different brand and that has been through a week of near 100 degrees. Still like how it was installed. So my advice. If it sits in the sun all day not the best thing to use. Also may I add I feel like vivid stuff got thicker or it can be me used them for years on and off but lately not as good as I thought.

Much thinner and a lot less pliable and stretchable than 3M. Next time I'll buy 3M.

Was easier to install than i thought it would be. Did provide good protection. Takes a while for adhesion lines (from using application tool) to level out and dissappear.

Unbelievable. Not a single word of instructions. It does not even say on the package which product it is out of hundreds on their Web site. There is zero instruction there also. Just reference to a youtube channel which covers everything in world, but installation PPF with adhesive. As it is, it's not possible to remove any air bubble. Looks horrible. Adhesive is pretty strong, so it's one or maybe two attempts and it's badly damaged. Do I need water, soap or some kind of solution? Go figure.

Grueso, poco maleable para superficies no planas

I applied this 3M clear vinyl to my car a few days ago. It's a 5 star product. I rated "Easy to install" less than 5 stars only because vinyl is never totally easy to install. It takes practice to do well and it's easy for a one-timer to do it poorly. Clean your surfaces well beforehand. Spray vehicle with soapy water, and pull vinyl back up/readjust as needed. Use a squeegee to work out the air pockets. And the final step, where the practice really comes in, heat up the vinyl with a heat gun to make it stretchy to wrap around curves and edges. That's the tricky part. Not enough heat and it won't contour properly, or too much heat and it melts/overstretches. Take your time and the end product can look great.

Tore very easily, and doesn't stick even with tack solution.

no llego completo, solo el vinil y nada de lo demas, aparte tardo muchisimo