Question 1

Which size sliding vise is the best for the 4214 12inch drill press

Accepted Answer

I am using the 4214 in a 12 inch press and it works fine for me. Depends on your individual use. These are stiff initially and require some breakin.

Question 2

Will this work well with the wen 4212 10-inch variable speed drill press?

Accepted Answer

Yes, mine is installed on a 10-inch Ryobi. The important information is the 3.25" which lines up nicely with the table slots. Note that no fasteners are supplied. I used 1/2" bolts, one size down is way the little standard 3" Wen vice is supplied (2-with lock washers and nuts). You can use up to 5 on this vice 7/16 ( a little tight at the back) or 3/8 only, or 4x1/2. Check your table thickness also for proper fastener length. I used 1 1/2" length. You still need to square it to the table for best results. Nylon bolts and washers made this requirement simpler. The vice requires tweaking for best results. Once done, this vice gets it done, short of brain surgery precision requirements (hundredths instead of thousands).

Wen 10-Inch DP
http://www.wenproducts.com/store/drill-press/10-Inch-Drill-Press-with-Cross-Hair-Laser-4210

WEN 413CV 3.25-Inch Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise
http://www.wenproducts.com/store/3.25-Inch-Compound-Cross-Slide-Industrial-Strength-Benchtop-and-Drill-Press-Vise

Question 3

Does this vise come with the mounting hardware (Nuts/Bolts) so that it can be secured onto the drill press?

Accepted Answer

My vice was shipped with two machine bolts, washers and nuts.  Appears very designed and fabricated at an exceptional value.  I paired it with the WEN 4210 10" drill press I just purchased from Amazon, also an exceptional value.  I've used these kinds of products for over 50 years and rate WEN one of the best values around.  I remember the original American company and still have a their electric wet stone that still works!  I think the Chinese company  that now owns WEN is trying to emulate their predecessor's value and integrity.

Question 4

what is x y axis accuracy ?

Accepted Answer

I measured the movement with a digital caliper and the scale on the controls is accurate.  Each mark indeed corresponds to a tenth of a millimeter as indicated.  However be mindful that this vise is not a precision instrument.  If you reverse direction there is significant initial play in the controls before movement resumes. If you make sure the controls are under tension before you move you should be alright.  Just don't expect to get down to a thousandth of an inch or anything.  By the same token you'd have to spend many times the price of this thing to get a better product.  This was my first purchase of a Wen product and it led me to buy one of their drill presses, and I also just received a dial indicator from them.  I've been completely satisfied with all of them.

ASIN	B09Q4R14M4
Best Sellers Rank	#102,906 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #102 in Bench Clamps
Brand	WEN
Brand Name	WEN
Color	Black
Colour	Black
Customer Reviews	4.2 out of 5 stars 410 Reviews
Global Trade Identification Number	00044459413004
Included Components	3.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise
Item Diameter	8.25 Centimeters
Item Dimensions	71.1 x 15.2 x 33 centimeters
Item Type Name	3.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise
Item Weight	7.35 Kilograms
Item dimensions L x W x H	71.1 x 15.2 x 33 centimeters
Item weight	7.35 Kilograms
Manufacturer	WEN
Manufacturer Part Number	CV413
Material	Cast Iron
Material Type	Cast Iron
Model Number	CV413
Number of Items	1
Number of Packs	1
Set Name	False
Style	2022 Model
Style Name	2022 Model
Tensile Strength	1900 Pounds
UPC	044459413004

WEN CV413 3.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise, Black

Details

Details

Description

Specifications

Reviews

Common Questions