CREWORKS 30L Ultrasonic Cleaner with Heater and Timer, 600W Stainless Steel Ultrasonic Parts Cleaner with Degas & Gentle Modes, Ultrasound Machine with Knob Control for Auto Tool Parts

Handy little cleaner.The key word is ‘little.’1.3L sounds like a lot or room in the basket, but the reality is that anything much larger than a chicken egg is not going to fit in the basket without poking out of the water/cleaning solution.I will take the description of 1.3L at face value, as I can not be bothered to check, but I have the feeling it is more like 1L.If you want to clean things like motorcycle carburettors it is too small. You can do the bits like float bowls, jets, covers, etc, but not the main body.Probably ideal for jewellery, and small item that you can hold in two cupped hands.Its small capacity and very noisy operation aside, it is very effective. The bits of carburettor I threw in it came out very nicely cleaned, and the water+cleaning solution went a very satisfying black. I can not fault it for not working as intended. So I bought a bigger one. Little bits and pieces go in this one, and bigger parts into the bigger one.I should have taken a ‘before and after’ picture, but only thought of doing that after.

Excellent thanko

This cleaner is great for small parts. I picked it up for cleaning watch parts, but i've also used it on disassembled carb parts and some jewelry. I got one of the smaller ones 1.something Litres. It's big enough to do a batch of watch parts or an amount of jewelery without fuss and without using a ton of power.The cleaner has option for time and heat and are very easy to set. It's best run with the fluid warm or hot (depending on what is being cleaned) because it is stainless it's easy to store and clean and you can even use the fluid for multiple rounds of cleaning.This works well, just remember to give the contents a rinse after or use a gentle fan (like a hair dryer on low) to dry it. I used it on watch parts, a disasembled carb, and a couple of rings and bracelets. Just remember this thing won't work miracles. If there's heavy sediment stuck to whatever you're cleaning you'll prob have to give it a gentle agitation with a toothbrush or pegwood to help shift the dirt quicker, otherwise it will probably need a few extra rounds of cleaning.A great value product.

Cleaned all my wifes jewellery with very good results .Will not take tarnish off silver but takes all the grime from between the links . Buff up afterwards with silver cleaning cloth . Watch straps good results do not immerse watch face , jewellery with set stones ,some took two dips at 30 min in a heated solution of water and fairy liquid ,now sparkling ! Years of grime removed .

Well made and works great. But where did they work out capacity of 1.3 litres? I reckon it’s about 0.75 li

Right, here's a no frills ultrasonic cleaner that is actually good value. Don't expect to get anything too big in it, it's only a small tank, but it produces a good result. It's controlled by two knobs, one for temperature and one for time, the timer is a basic mechanical set up and the temperature is a simple thermostat. Best results are obtained when using a warm solution for cleaning, not just warm water,but a concentrate suited to what you are cleaning, I use an ammoniated cleaner for clock parts and coupled with some heat produces a great result. The tank heater will heat the solution eventually but you'll be half way through the timer by the time it's hot enough, use hot water to start with, from a kettle. The timer has no form of alarm to tell you when it's done so set a timer on your phone or stand by it. Results are good on jewellery and clock parts from my own experience. Worth a purchase.

Superb kit with heater

this has helped me clean multiple clock parts in record time .